Outputs (137)

Near stall unsteady flow responses to morphing flap deflections (2021)
Journal Article
Abdessemed, C., Yao, Y., & Bouferrouk, A. (2021). Near stall unsteady flow responses to morphing flap deflections. Fluids, 6(5), Article 180. https://doi.org/10.3390/fluids6050180

The unsteady flow characteristics and responses of an NACA 0012 airfoil fitted with a bio-inspired morphing trailing edge flap (TEF) at near-stall angles of attack (AoA) undergoing downward deflections are investigated at a Reynolds number of 0.62 ×... Read More about Near stall unsteady flow responses to morphing flap deflections.

Aerodynamic and aeroacoustic analysis of a harmonically morphing airfoil using dynamic meshing (2021)
Journal Article
Abdessemed, C., Bouferrouk, A., & Yao, Y. (2021). Aerodynamic and aeroacoustic analysis of a harmonically morphing airfoil using dynamic meshing. Acoustics, 3(1), 177-199. https://doi.org/10.3390/acoustics3010013

This work explores the aerodynamic and aeroacoustic responses of an airfoil fitted with a harmonically morphing Trailing Edge Flap (TEF). An unsteady parametrization method adapted for harmonic morphing is introduced, and then coupled with dynamic me... Read More about Aerodynamic and aeroacoustic analysis of a harmonically morphing airfoil using dynamic meshing.

U-model-based two-degree-of-freedom internal model control of nonlinear dynamic systems (2021)
Journal Article
Li, R., Zhu, Q., Narayan, P., Yue, A., Yao, Y., & Deng, M. (2021). U-model-based two-degree-of-freedom internal model control of nonlinear dynamic systems. Entropy, 23(2), Article 169. https://doi.org/10.3390/e23020169

This paper proposes a U-Model-Based Two-Degree-of-Freedom Internal Model Control (UTDF-IMC) structure with strength in nonlinear dynamic inversion, and separation of tracking design and robustness design. This approach can effectively accommodate mod... Read More about U-model-based two-degree-of-freedom internal model control of nonlinear dynamic systems.

Comparison study of URANS and hybrid RANS-LES models on predicting vertical axis wind turbine performance at low, medium and high tip speed ratio ranges (2020)
Journal Article
Syawitri, T. P., Yao, Y. F., Chandra, B., & Yao, J. (2021). Comparison study of URANS and hybrid RANS-LES models on predicting vertical axis wind turbine performance at low, medium and high tip speed ratio ranges. Renewable Energy, 168, 247-269. https://doi.org/10.1016/j.renene.2020.12.045

Comparison study of unsteady Reynolds-averaged Navier-Stokes (URANS) and hybrid RANS-LES models is carried out for predicting the performance of three-straight-bladed vertical axis wind turbine operating within tip speed ratios (TSRs) ranges of (1.44... Read More about Comparison study of URANS and hybrid RANS-LES models on predicting vertical axis wind turbine performance at low, medium and high tip speed ratio ranges.

Design optimization of grid-connected PV-Hydrogen for energy prosumers considering sector-coupling paradigm: Case study of a university building in Algeria (2020)
Journal Article
Mokhtara, C., Negrou, B., Settou, N., Bouferrouk, A., & Yao, Y. (2021). Design optimization of grid-connected PV-Hydrogen for energy prosumers considering sector-coupling paradigm: Case study of a university building in Algeria. International Journal of Hydrogen Energy, 46(75), 37564-37582. https://doi.org/10.1016/j.ijhydene.2020.10.069

Integrating sector coupling technologies into Hydrogen (H2) based hybrid renewable energy systems (HRES) is becoming a promising way to create energy prosumers, despite the very little research work being done in this largely unexplored field. In thi... Read More about Design optimization of grid-connected PV-Hydrogen for energy prosumers considering sector-coupling paradigm: Case study of a university building in Algeria.

Flow analysis in right-angled pipes with different geometric shapes and parameters for sludge discharge in slime shield machines measured using a CFD-DEM method (2020)
Journal Article
Chen, L., Liu, K., Yao, Y., Yao, J., Su, Z., & Luo, G. (2020). Flow analysis in right-angled pipes with different geometric shapes and parameters for sludge discharge in slime shield machines measured using a CFD-DEM method. International Journal for Computational Methods in Engineering Science and Mechanics, 21(5), 231-242. https://doi.org/10.1080/15502287.2020.1809554

Mud and gravel deposition often occurs in circulation systems of pumps. In this paper, a liquid-solid coupling method combining CFD and DEM is proposed to study two-phase flow behavior of water, The flow characteristics of water-clay mud and the moti... Read More about Flow analysis in right-angled pipes with different geometric shapes and parameters for sludge discharge in slime shield machines measured using a CFD-DEM method.

A GIS-MOPSO integrated method for optimal design of grid-connected HRES for educational buildings (2020)
Book Chapter
Mokhtar, C., Negrou, B., Settou, N., Bouferrouk, A., Yao, Y., & Messaoudi, D. A GIS-MOPSO integrated method for optimal design of grid-connected HRES for educational buildings. In Springer Proceedings in Energy (371-378). Springer. https://doi.org/10.1007/978-981-15-6595-3_48

In this paper, an optimal design of a grid-connected PV-battery-hydrogen hybrid renewable energy system (HRES) at a University campus in Ouargla, Algeria is carried out. To achieve this goal, geographical information system (GIS), CAD software and mu... Read More about A GIS-MOPSO integrated method for optimal design of grid-connected HRES for educational buildings.

Integrated supply–demand energy management for optimal design of off-grid hybrid renewable energy systems for residential electrification in arid climates (2020)
Journal Article
Mokhtara, C., Negrou, B., Bouferrouk, A., Yao, Y., Settou, N., & Ramadan, M. (2020). Integrated supply–demand energy management for optimal design of off-grid hybrid renewable energy systems for residential electrification in arid climates. Energy Conversion and Management, 221, Article 113192. https://doi.org/10.1016/j.enconman.2020.113192

The growing research interest in hybrid renewable energy systems (HRESs) has been regarded as a natural and yet critical response to address the challenge of rural electrification. Based on a Bibliometric analysis performed by authors, it was conclud... Read More about Integrated supply–demand energy management for optimal design of off-grid hybrid renewable energy systems for residential electrification in arid climates.

On the turbulence amplification in shock-wave/turbulent boundary layer interaction (2020)
Journal Article
Fang, J., Zheltovodov, A. A., Yao, Y., Moulinec, C., & Emerson, D. R. (2020). On the turbulence amplification in shock-wave/turbulent boundary layer interaction. Journal of Fluid Mechanics, 897, Article A32. https://doi.org/10.1017/jfm.2020.350

The mechanism of turbulence amplification in shock-wave/boundary layer interactions is reviewed, and a new turbulence amplification mechanism is proposed based on the analysis of data from direct numerical simulation of an oblique shock-wave/flat-pla... Read More about On the turbulence amplification in shock-wave/turbulent boundary layer interaction.

Assessment of stress-blended eddy simulation model for accurate performance prediction of vertical axis wind turbine (2020)
Journal Article
Syawitri, T. P., Yao, Y., Yao, J., & Chandra, B. (2021). Assessment of stress-blended eddy simulation model for accurate performance prediction of vertical axis wind turbine. International Journal of Numerical Methods for Heat and Fluid Flow, 31(2), 655-673. https://doi.org/10.1108/HFF-09-2019-0689

Purpose: The aim of this paper is to assess the ability of a stress-blended eddy simulation (SBES) turbulence model to predict the performance of a three-straight-bladed vertical axis wind turbine (VAWT). The grid sensitivity study is conducted to ev... Read More about Assessment of stress-blended eddy simulation model for accurate performance prediction of vertical axis wind turbine.