Outputs (26)

Investigation of energy absorption performances of a 3D printed fiber-reinforced bio-inspired cellular structure under in-plane compression loading (2023)
Journal Article
Ghorbani, F., Gharehbaghi, H., Farrokhabadi, A., Bolouri, A., Behravesh, A. H., & Hedayati, S. K. (in press). Investigation of energy absorption performances of a 3D printed fiber-reinforced bio-inspired cellular structure under in-plane compression loading. Mechanics of Advanced Materials and Structures, https://doi.org/10.1080/15376494.2023.2214552

This article proposes glass-fiber-reinforced bone-inspired cellular structures to enhance energy absorption capability. The elastic modulus of the bone-inspired unit cell is obtained analytically based on the energy method and then employed in Partic... Read More about Investigation of energy absorption performances of a 3D printed fiber-reinforced bio-inspired cellular structure under in-plane compression loading.

Mechanical characterization of high volume fraction Al7075-Al2O3 composite fabricated by semisolid powder processing (2023)
Journal Article
Aghajani, S., Pouyafar, V., Meshkabadi, R., Volinsky, A. A., & Bolouri, A. (2023). Mechanical characterization of high volume fraction Al7075-Al2O3 composite fabricated by semisolid powder processing. International Journal of Advanced Manufacturing Technology, 125, 2569–2580. https://doi.org/10.1007/s00170-023-10881-9

The mechanical properties and physical characteristics of aluminum alloy composites can be significantly improved by adding reinforcing phases. However, the high loading of the reinforcement phase in Al7075-Al2O3 composites has not been thoroughly st... Read More about Mechanical characterization of high volume fraction Al7075-Al2O3 composite fabricated by semisolid powder processing.

Investigation of the equivalent mechanical properties of the bone-inspired composite cellular structure: Analytical, numerical and experimental approaches (2023)
Journal Article
Ghorbani, F., Gharehbaghi, H., Farrokhabadi, A., & Bolouri, A. (2023). Investigation of the equivalent mechanical properties of the bone-inspired composite cellular structure: Analytical, numerical and experimental approaches. Composite Structures, 309, 116720. https://doi.org/10.1016/j.compstruct.2023.116720

This study investigated the development of an analytical model using the energy method and Castigliano's second theory to evaluate the equivalent mechanical properties for a bone-inspired cellular structure of a glass fiber-reinforced Polylactic Acid... Read More about Investigation of the equivalent mechanical properties of the bone-inspired composite cellular structure: Analytical, numerical and experimental approaches.

Effects of shot peening and artificial surface defects on fatigue properties of 50CrV4 steel (2021)
Journal Article
Saklakoglu, N., Bolouri, A., Irizalp, S. G., Baris, F., & Elmas, A. (2021). Effects of shot peening and artificial surface defects on fatigue properties of 50CrV4 steel. International Journal of Advanced Manufacturing Technology, 112, 2961–2970. https://doi.org/10.1007/s00170-020-06532-y

Shot peening processes are commonly used for improving the fatigue properties of steels. Shot peening introduces a compressive residual stress field in the near surface of steel, which can reduce or stop the growth of fatigue cracks and improve fatig... Read More about Effects of shot peening and artificial surface defects on fatigue properties of 50CrV4 steel.

A new design for friction stir spot joining of Al alloys and carbon fibre reinforced composites (2020)
Journal Article
Bolouri, A., Fotouhi, M., & Moseley, W. (2020). A new design for friction stir spot joining of Al alloys and carbon fibre reinforced composites. Journal of Materials Engineering and Performance, 29, 4913-4921. https://doi.org/10.1007/s11665-020-04998-1

Friction stir spot welding (FSSW) has been recently developed to join dissimilar materials. However, the traditional requirement for a rotating tool consists of a pin and shoulder in FSSW leads to a complex joining process and unpredictable defects.... Read More about A new design for friction stir spot joining of Al alloys and carbon fibre reinforced composites.

High-performance bio-inspired composite T-joints (2019)
Journal Article
Akrami, R., Fotouhi, S., Fotouhi, M., Bodaghi, M., Clamp, J., & Bolouri, A. (2019). High-performance bio-inspired composite T-joints. Composites Science and Technology, 184, Article 107840. https://doi.org/10.1016/j.compscitech.2019.107840

© 2019 Elsevier Ltd This paper introduces a novel bio-inspired design strategy based on the optimised topology of bird bone's joint to improve the strength-to-weight ratio and damage tolerance of composite T-joints. Better structuring the constituent... Read More about High-performance bio-inspired composite T-joints.

Investigating polyethersulfone interleaved Glass/Carbon hybrid composite under impact and its comparison with GLARE (2019)
Journal Article
Fotouhi, S., Clamp, J., Bolouri, A., Pozegic, T. R., & Fotouhi, M. (2019). Investigating polyethersulfone interleaved Glass/Carbon hybrid composite under impact and its comparison with GLARE. Composite Structures, 226, 111268. https://doi.org/10.1016/j.compstruct.2019.111268

A tough polyethersulfone (PES) membrane was utilized as a novel reinforcement to improve impact performance of a carbon/glass hybrid composite. The hybrid composite was made of a glass fibre/epoxy block that was sandwiched between two carbon fibre/ep... Read More about Investigating polyethersulfone interleaved Glass/Carbon hybrid composite under impact and its comparison with GLARE.

Transient Rheological Behavior of Semisolid SEED-Processed 7075 Aluminum Alloys in Rapid Compression (2018)
Journal Article
Bolouri, A., & Chen, X. G. (2018). Transient Rheological Behavior of Semisolid SEED-Processed 7075 Aluminum Alloys in Rapid Compression. Metallurgical and Materials Transactions B, 49(5), 2858-2867. https://doi.org/10.1007/s11663-018-1372-y

© 2018, The Author(s). The transient rheological behavior and microstructure evolution of semisolid SEED-processed 7075 aluminum alloys were studied using the rapid compression tests. The effects of the TiB2 grain refinement on the grain morphology a... Read More about Transient Rheological Behavior of Semisolid SEED-Processed 7075 Aluminum Alloys in Rapid Compression.

Tensile deformation behavior of Al-Cu 206 cast alloys near the solidus temperature (2016)
Journal Article
Chen, X. G., & Bolouri, A. (2017). Tensile deformation behavior of Al-Cu 206 cast alloys near the solidus temperature. Materials Science Forum, 877, 90-96. https://doi.org/10.4028/www.scientific.net/MSF.877.90

© 2017 Trans Tech Publications, Switzerland. To study the micromechanics of semisolid deformation, a modified experimental set-up is employed in Gleeble 3800 thermomechamical testing unit to achieve a uniform temperature distribution in partially rem... Read More about Tensile deformation behavior of Al-Cu 206 cast alloys near the solidus temperature.

Effects of Iron-Rich Intermetallics and Grain Structure on Semisolid Tensile Properties of Al-Cu 206 Cast Alloys near Solidus Temperature (2016)
Journal Article
Bolouri, A., Liu, K., & Chen, X. G. (2016). Effects of Iron-Rich Intermetallics and Grain Structure on Semisolid Tensile Properties of Al-Cu 206 Cast Alloys near Solidus Temperature. Metallurgical and Materials Transactions A, 47(12), 6466-6480. https://doi.org/10.1007/s11661-016-3744-8

© 2016, The Minerals, Metals & Materials Society and ASM International. The effects of iron-rich intermetallics and grain size on the semisolid tensile properties of Al-Cu 206 cast alloys near the solidus were evaluated in relation to the mush micr... Read More about Effects of Iron-Rich Intermetallics and Grain Structure on Semisolid Tensile Properties of Al-Cu 206 Cast Alloys near Solidus Temperature.