Outputs (27)

Aerodynamic analysis of a harmonically morphing flap using a hybrid turbulence model and dynamic meshing (2018)
Conference Proceeding
Abdessemed, C., Yao, Y., Bouferrouk, A., & Narayan, P. P. (2018). Aerodynamic analysis of a harmonically morphing flap using a hybrid turbulence model and dynamic meshing. In 2018 Applied Aerodynamics Conference. https://doi.org/10.2514/6.2018-3813

© 2018, American Institute of Aeronautics and Astronautics Inc, AIAA. All rights reserved. A numerical study of the NACA 0012 airfoil fitted with a harmonically morphing trailing edge flap (TEF) is performed at an angle of attack of 4º and a Reynolds... Read More about Aerodynamic analysis of a harmonically morphing flap using a hybrid turbulence model and dynamic meshing.

Design, manufacture and test of a camber morphing wing using MFC actuated smart rib (2017)
Presentation / Conference
Kimaru, J., & Bouferrouk, A. (2017, July). Design, manufacture and test of a camber morphing wing using MFC actuated smart rib. Paper presented at 8th International Conference on Mechanical and Aerospace Engineering, Prague

This paper discusses the design, manufacture and testing of a light weight, camber morphing wing concept for UAV application. The concept is based on using an MFC actuator attached to a composite plate which extends along the main wing and connects l... Read More about Design, manufacture and test of a camber morphing wing using MFC actuated smart rib.

Unsteady parametrization of a morphing wing design for improved aerodynamic performance (2017)
Presentation / Conference
Abdessemed, C., Yao, Y., Narayan, P., & Bouferrouk, A. (2017, March). Unsteady parametrization of a morphing wing design for improved aerodynamic performance. Paper presented at 52nd 3AF International Conference on Applied Aerodynamics, Lyon, France

A morphing wing is a bio-inspired concept where all moving parts e.g. slats/flaps are replaced with a deformable body. This paper describes a methodology that uses modified parametrization methods to define a morphing geometry, and applies user-defin... Read More about Unsteady parametrization of a morphing wing design for improved aerodynamic performance.

DES prediction of a novel high-lift device step 1: Steady blowing (2016)
Presentation / Conference
Ouyang, B., Yao, Y., & Bouferrouk, A. (2016, July). DES prediction of a novel high-lift device step 1: Steady blowing. Poster presented at 2016 Applied Aerodynamics, Bristol, UK

This presentation focus on my recent results from year one. I.E. Identify the best CFD method to use with high-lift devices and apply flow control to improve performance.

Development and testing of a variable camber morphing wing mechanism (2016)
Presentation / Conference
Evans, C., Harmer, M., Marks, O., Tiley, S., Willis, T., Bouferrouk, A., & Yao, Y. (2016, May). Development and testing of a variable camber morphing wing mechanism. Paper presented at International Symposium of Sustainable Aviation, Istanbul, Turkey

The aim of this study was to develop, build and test a morphing wing design in a low-speed wind tunnel to demonstrate its viability as a practical morphing mechanism. The original concept this study is based upon is so-called the Direct Control Airfo... Read More about Development and testing of a variable camber morphing wing mechanism.

DES prediction of near stall performance of a high lift airfoil (2016)
Presentation / Conference
Ouyang, B., Yao, Y., & Bouferrouk, A. (2016, May). DES prediction of near stall performance of a high lift airfoil. Paper presented at International Symposium of Sustainable Aviation, Istanbul, Turkey

CFD analyses using Detached Eddy Simulation (DES) and Reynolds-Averaged Navier-Stokes (RANS) techniques are conducted on a two-element NLR 7301 airfoil configuration at take-off flow conditions to predict its near stall aerodynamic performance. Meshi... Read More about DES prediction of near stall performance of a high lift airfoil.

Quantifying turbulence from field measurements at a mixed low tidal energy site (2016)
Journal Article
Bouferrouk, A., Hardwick, J. P., Colucci, A. M., & Johanning, L. (2016). Quantifying turbulence from field measurements at a mixed low tidal energy site. Renewable Energy, 87(1), 478-492. https://doi.org/10.1016/j.renene.2015.10.046

© 2015 Elsevier Ltd. This study explores typical characteristics of the mean and turbulent profiles at a mixed low tidal energy site (40 m mean water depth) where the waves have limited effects on the currents. The turbulence profiles were derived fr... Read More about Quantifying turbulence from field measurements at a mixed low tidal energy site.