The Ice Road (2017)
Exhibition / Performance
Clark, S. The Ice Road. [Performance]. Performed at Jacob's Wells Road Baths, Bristol. 21 August 2017 - 27 November 2017. (Unpublished)

Site-responsive immersive theatre fusing live performance, creative technology, film, music, projection mapping and object based technology.

Immersive Architecture Conference (2017)
Presentation / Conference
D'Agnano, F. (2017, June). Immersive Architecture Conference. Presented at Immersive Architecture Conference, Venice

The Immersive Architecture Conference is the first conference on virtual reality and augmented reality within architecture, design, real estate and cultural heritage. Im-Arch is organized by CGarchitect, the leading online community for architect... Read More about Immersive Architecture Conference.

A manifesto for ambient literature (2017)
Digital Artefact
Abba, T. (2017). A manifesto for ambient literature. [Printed Manifesto]

A Manifesto for Ambient Literature comprises 22 pre-printed A5 cards, each comprising a provocation, gesture or argument drawn from a larger definition of Ambient Literature. Collectively, they represent a mid-way exploration of the research project,... Read More about A manifesto for ambient literature.

Craftsmen and technology (2016)
Book Chapter
D'Agnano, F. (2016). Craftsmen and technology. In New Craft exhibit catalogue (104). Venezia: Marsilio Editore

The catalogue describes the virtuous encounter between craftsmanship, technological innovation and project culture. The technological revolution is transforming the ways of production and consumption and, inevitably, also the forms of design. A new... Read More about Craftsmen and technology.

Textile Led Sustainable Innovation for Sportswear (2016)
Presentation / Conference
Morgan, L., Kane, F., Tyrer, J., & Shen, J. (2016, December). Textile Led Sustainable Innovation for Sportswear. Presented at The End of Fashion, College of Creative Arts, Massey University Wellington, New Zealand

Textiles design research: from chemistry to craft, towards sustainable design innovation (2016)
Conference Proceeding
Kane, F., Morgan, L., Akiwowo, K., & Tyrer, J. (2016). Textiles design research: from chemistry to craft, towards sustainable design innovation. . https://doi.org/10.7190/ead/2015/66

Academic research in textile design has traditionally been dominated by technical studies situated with science and engineering knowledge frameworks. Increasingly textile designers are undertaking research into technical areas with creative intention... Read More about Textiles design research: from chemistry to craft, towards sustainable design innovation.

Towards a performative trans-pedagogy: Critical approaches for learning and teaching in art and performance (2016)
Journal Article
Mulvey, M., & Chalklin, V. (2016). Towards a performative trans-pedagogy: Critical approaches for learning and teaching in art and performance. Performance Matters, 2(1), 62-77

This paper examines two short courses delivered by the authors through Tate’s public programme in 2014/15 as case studies through which to consider the possibilities of performative critical pedagogy for art and performance appreciation and criticism... Read More about Towards a performative trans-pedagogy: Critical approaches for learning and teaching in art and performance.

Garden Stories (2016)
Book
Harman, A. (2016). Garden Stories. USA: Blue Sky Books / Chris Raushenberg

Published by Blue Sky Gallery to coincide with a Solo Exhibition at the gallery in 2016, this series of unintended or ‘accidental’ still lives, made around the gardens and outbuildings of an English country house, seeks to make visible the unseen and... Read More about Garden Stories.

to be (2015)
Journal Article
Rogers, S. (2015). to be. Tears in the Fence, 62, 34

One poem.

Neo-industrial biography, glass working and re-configurable toolmaking (2015)
Exhibition / Performance
Jorgensen, T. (in press). Neo-industrial biography, glass working and re-configurable toolmaking. [Glass]. Exhibited at Los Angeles. 7 August 2015 - 15 August 2015. (Unpublished)

The title for this exhibition (and presentation) is a reference to Samuel Smiles book: “Industrial Biography, Iron Workers and Toolmakers” (1863). In this book Smiles discusses how advances in tool making was the driving force for the first industr... Read More about Neo-industrial biography, glass working and re-configurable toolmaking.

Laser-dyeing for Sustainable Textile Design (2015)
Presentation / Conference
Morgan, L., Tyrer, J., Kane, F., & Shen, J. (2015, June). Laser-dyeing for Sustainable Textile Design. Paper presented at 13th International Wool Research Conference (IWRC-13) And AATCC Sustainability Symposium, Zhejiang Sci-Tech University, Hangzhou, China

Current industry standards for dyeing woollen textiles use high temperatures and long processing times to aid dye diffusion. The consumption of water, energy and chemicals used in dyeing and finishing processes have been identified as key challenges... Read More about Laser-dyeing for Sustainable Textile Design.

The Stick House (2015)
Exhibition / Performance
Clark, S. The Stick House. [Script]. Performed at Bristol Temple Meads station. 5 June 2015 - 6 November 2015. (Unpublished)

Immersive theatre experience fusing live performance, digital technology, film and music produced in 2017 in tunnels under Bristol Temple Meads station. Writer and creator.

Critical Mass - Points of Entry (2015)
Exhibition / Performance
Harman, A. Critical Mass - Points of Entry. Exhibited at Fotowestival Lodz, Poland. 28 May 2015 - 7 June 2015. (Unpublished)

Exhibiting artist in the Critical Mass 50 exhibition, Points of Entry, shown as part of Fotowestival Lodz in 2015. Curated by Fotofestiwal Artistic Director, Alison Nordström each image can be seen as an entry point to a winning series, while the ne... Read More about Critical Mass - Points of Entry.

Tooteko: A case study of augmented reality for an accessible cultural heritage. Digitization, 3D printing and sensors for an audio-tactile experience (2015)
Journal Article
D’Agnano, F., Balletti, C., Guerra, F., & Vernier, P. (2015). Tooteko: A case study of augmented reality for an accessible cultural heritage. Digitization, 3D printing and sensors for an audio-tactile experience. The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, 40(5W4), 207-213. https://doi.org/10.5194/isprsarchives-xl-5-w4-207-2015

Tooteko is a smart ring that allows to navigate any 3D surface with your finger tips and get in return an audio content that is relevant in relation to the part of the surface you are touching in that moment. Tooteko can be applied to any tactile sur... Read More about Tooteko: A case study of augmented reality for an accessible cultural heritage. Digitization, 3D printing and sensors for an audio-tactile experience.

Proposing A Digital Laser-Design Supply Service (2015)
Presentation / Conference
Morgan, L. (2015, January). Proposing A Digital Laser-Design Supply Service. Presented at TechStyleLAB Symposium, Kent State University, Ohio, USA

The effect of CO2 laser irradiation on surface and dyeing properties of wool for textile design (2014)
Conference Proceeding
Morgan, L., Tyrer, J., & Kane, F. (2014). The effect of CO2 laser irradiation on surface and dyeing properties of wool for textile design. . https://doi.org/10.2351/1.5063061

The consumption of water and energy used in current dyeing and finishing processes in the textile industry pose significant environmental concern. By offering alternative solutions to traditional textile wet processing through laser technology, there... Read More about The effect of CO2 laser irradiation on surface and dyeing properties of wool for textile design.

Laser enhanced dyeing of wool for textile design (2014)
Presentation / Conference
Morgan, L., Tyrer, J., Kane, F., & Shen, J. (2014, November). Laser enhanced dyeing of wool for textile design. Paper presented at Transitions: Re-thinking Textiles and Surfaces, University Of Huddersfield, Huddersfield, U.K

A laser assisted dyeing technique for wool based textiles, allowing surface pattering of the textile substrate, is presented in this paper. Laser technology can offer digital design capabilities combined with the ability for bespoke or short run prod... Read More about Laser enhanced dyeing of wool for textile design.

Materiality of the Visual: Reimagi(ni)ng the City (2014)
Presentation / Conference
Banou, S. (2014, March). Materiality of the Visual: Reimagi(ni)ng the City. Paper presented at What Images Do Symposium, KADK, The Royal Danish Academy Schools of Architecture, Design, Conservation and Visual Art, Copenhagen

The 19th century, was a period of rapid developments in the field of optics with the invention of a series of optical devices that imitated or expanded the capabilities of the eye. The increasing mobility of the world due to the mechanization imposed... Read More about Materiality of the Visual: Reimagi(ni)ng the City.

Grey pin bowl at the "British Design: From William Morris to the Digital Revolution" exhibition (2014)
Physical Artefact
Jorgensen, T. (2014). Grey pin bowl at the "British Design: From William Morris to the Digital Revolution" exhibition. [Glass]

Glass Bowls featured at “British Design: from William Morris to the Digital Revolution” The exhibition was a participant of Russian-British 2014 Bilateral Year and took place in the Pushkin State Museum of Fine Arts. Intimate yet fundamental, this... Read More about Grey pin bowl at the "British Design: From William Morris to the Digital Revolution" exhibition.

Reflection on a collaborative research project in digital moulding for glass casting and artistic interpretation (2014)
Journal Article
Matthias, G., & Jorgensen, T. (2014). Reflection on a collaborative research project in digital moulding for glass casting and artistic interpretation

This is a two-part paper; firstly, describing a collaborative research project aiming to provide innovation in glass investment casting through the exploration of digital fabrication methods. Secondly, illustrating examples of the artistic explorati... Read More about Reflection on a collaborative research project in digital moulding for glass casting and artistic interpretation.