Skip to main content

Research Repository

Advanced Search

All Outputs (510)

Flow response to rapid morphing flap deflection (2019)
Presentation / Conference
Abdessemed, C., Yao, Y., Bouferrouk, A., & Narayan, P. (2019, March). Flow response to rapid morphing flap deflection. Paper presented at 54th 3AF International Conference on Applied Aerodynamics, Paris - France

Flow response to rapid morphing flap deflection is investigated at a Reynolds number based on chord of 0.62×10^6 for a 2D NACA 0012 airfoil fitted with a morphing Trailing-edge flap (TEF) at a range of angles of attack and morphing frequencies. T... Read More about Flow response to rapid morphing flap deflection.

Enhancing the learning process of people with special needs using wearables and Artificial Intelligence (2019)
Presentation / Conference
Bakthavatchaalam, V. (2019, March). Enhancing the learning process of people with special needs using wearables and Artificial Intelligence. Paper presented at UNESCO: Mobile Learning Week 2019, Paris, France

Wearables are widely used in monitoring various physical activities and biological signals of an individual to improve their current lifestyle. This research proposes a novel way to enhance the learning of individuals with special needs, by collectin... Read More about Enhancing the learning process of people with special needs using wearables and Artificial Intelligence.

Development of a Debris Clearance Vehicle for Limited Access Environments (2019)
Presentation / Conference
West, C., Cheah, W., Rajasekaran, V., Stolkin, R., West, A., Arvin, F., …Lennox, B. (2019, January). Development of a Debris Clearance Vehicle for Limited Access Environments. Paper presented at 2nd UK-RAS ROBOTICS AND AUTONOMOUS SYSTEMS CONFERENCE, Loughborough, 2019, Loughborough, UK

Integrating shelf life constraints in capacitated lot sizing and scheduling for perishable products (2018)
Presentation / Conference
Chen, S., Berretta, R., Mendes, A., & Clark, A. (2018, December). Integrating shelf life constraints in capacitated lot sizing and scheduling for perishable products. Paper presented at 26th ASOR National Conference for the Australian Society of Operations Research, Melbourne, Australia

In this study, we consider a multi-item capacitated lot sizing and scheduling problem for perishable food products, which have a fixed shelf life period due to depreciation issues, such as physical deterioration or perceived value loss. We incorporat... Read More about Integrating shelf life constraints in capacitated lot sizing and scheduling for perishable products.

Enhancing sustainable development goals and empathy through digital education: A pilot cross national study between India and the UK (2018)
Presentation / Conference
Bakthavatchaalam, V. (2018, November). Enhancing sustainable development goals and empathy through digital education: A pilot cross national study between India and the UK. Poster presented at UNESCO: Transforming Education Conference for Humanity, Vizag, India

This e-poster builds on our last year’s research (Bakthavatchaalam et al., 2017) on the effectiveness of digital education in enhancing the subject knowledge and SDGs in engineering Higher Education (HE) learners. In this study, expand our study by c... Read More about Enhancing sustainable development goals and empathy through digital education: A pilot cross national study between India and the UK.

Airborne artificial intelligence in the wild (2018)
Presentation / Conference
Wright, S. (2018, November). Airborne artificial intelligence in the wild. Presented at Commercial UAV Show 2018, Excel, London

MAVs, UAVs, Drones, Quads, call them what you will. A set of technologies has converged to cause a breakthrough in capability and cost, which has created a new industry and colossal interest from many parties who see both opportunities and threats.... Read More about Airborne artificial intelligence in the wild.

Optimal distribution power system reconfiguration using Genetics Algorithms and Branch exchange method (2018)
Presentation / Conference
Nouri, H. (2018, October). Optimal distribution power system reconfiguration using Genetics Algorithms and Branch exchange method. Paper presented at CISTEM2018, Algiers, Algeria

This paper uses Genetic Algorithms (GAs) and the branch exchange method to solve the optimal reconfiguration in radial distribution systems subject to power loss reduction that determine the optimal switches. The GA is a relatively powerful intellige... Read More about Optimal distribution power system reconfiguration using Genetics Algorithms and Branch exchange method.

A review of current technical development in vertical axis wind turbine technologies and their braking system for low speed, urban and offshore areas application (2018)
Presentation / Conference
Syawitri, T., Yao, Y., & Chandra, B. (2018, October). A review of current technical development in vertical axis wind turbine technologies and their braking system for low speed, urban and offshore areas application. Paper presented at International Conference of Global Warming and Climate Change 2018, Bangkok, Thailand

Recently, there are growing interests of using Vertical Axis Wind Turbine (VAWT) to harvest wind energy from low wind speed in urban areas to relatively high wind speed in offshore wind farms. Horizontal Axis Wind Turbine (HAWT) has been known to hav... Read More about A review of current technical development in vertical axis wind turbine technologies and their braking system for low speed, urban and offshore areas application.

CFD simulation of three-straight-bladed vertical axis wind turbine at low tip speed ratios (2018)
Presentation / Conference
Syawitri, T., Yao, Y., Chandra, B., & Yao, J. (2018, October). CFD simulation of three-straight-bladed vertical axis wind turbine at low tip speed ratios. Paper presented at International Conference of Global Warming and Climate Change 2018, Bangkok, Thailand

This paper presents computational fluid dynamics (CFD) simulations of a three-straight-bladed Vertical Axis Wind Turbine (VAWT) operating at a wind speed of 9 m/s and low Tip Speed Ratio (TSR) ranging from 1.44 to 3.3. The turbine blade has NACA 0021... Read More about CFD simulation of three-straight-bladed vertical axis wind turbine at low tip speed ratios.

Small ceramic microbial fuel cell as a trigenerative system for electricity, organics degradation and urine filtration (2018)
Presentation / Conference
Gajda, I., Greenman, J., Santoro, C., Serov, A., Atanassov, P., & Ieropoulos, I. (2018, September). Small ceramic microbial fuel cell as a trigenerative system for electricity, organics degradation and urine filtration. Paper presented at AiMES 2018 : ECS and SMEQ Joint International Meeting, Cancun, Mexico

Bioelectrochemical systems are employing microbes as biocatalysts to convert waste into valuable resources. For example, a Microbial Fuel Cell (MFC) utilises chemical energy locked in human urine into direct electrical current and can be scaled-up to... Read More about Small ceramic microbial fuel cell as a trigenerative system for electricity, organics degradation and urine filtration.

Quantifying the delamination of L-shaped composite laminates under low velocity impact using x-ray computed tomography (2018)
Presentation / Conference
Cinar, K., Guven, I., Fatih E., O., & Ersoy, N. (2018, September). Quantifying the delamination of L-shaped composite laminates under low velocity impact using x-ray computed tomography. Paper presented at 33rd Technical Conference of the American Society for Composites 2018, Seattle, Washington, USA

Low velocity impact response and failure behavior of L-shaped composite laminates were investigated. The composite laminates with variable thickness, stacking sequences, and corner radius were manufactured using autoclave manufacturing method. Tests... Read More about Quantifying the delamination of L-shaped composite laminates under low velocity impact using x-ray computed tomography.

Pseudo-ductility of unidirectional thin ply hybrid composites in longitudinal compression (2018)
Presentation / Conference
Suwarta, P., Czel, G., Fotouhi, M., Rycerz, J., & Wisnom, M. (2018, September). Pseudo-ductility of unidirectional thin ply hybrid composites in longitudinal compression. Presented at ASC 33rd Annual Technical Conference, Seattle, USA

The compression response of unidirectional thin-ply carbon (C) standard thickness S-glass (SG) hybrid composites is presented. Gradual failure up to high strain has been demonstrated for [SG1/(C1/SG1)17] and [SG1/(C2/SG1)17] hybrid configurations. T... Read More about Pseudo-ductility of unidirectional thin ply hybrid composites in longitudinal compression.

Use of technology enhanced teaching rooms to support flipped teaching (2018)
Presentation / Conference
Henderson, K., Hobbs, C., & Gwynllyw, R. (2018, September). Use of technology enhanced teaching rooms to support flipped teaching. Paper presented at 12th International Symposium on Advances in Technology Education Nurturing Professionals for Smart Cities: Way Forward for Technology Education, Hong Kong

In this paper we report on our experiences of flipping the classroom for three modules delivered to first and second year Mathematics students at the University of the West of England, Bristol. In particular we focus on how using collaborative teach... Read More about Use of technology enhanced teaching rooms to support flipped teaching.

In-class e-testing of statistics in a large cohort of diverse ability (2018)
Presentation / Conference
Weir, I., Gwynllyw, R., & Henderson, K. (2018, September). In-class e-testing of statistics in a large cohort of diverse ability. Paper presented at 12th International Symposium on Advances in Technology Education Nurturing Professionals for Smart Cities: Way Forward for Technology Education, Hong Kong

We report on our experience of running in-class e-Tests for a new Level 1 Business Decision Making module taken by 800 Business School students at the University of the West of England (UWE Bristol). The module comprises a one semester course coverin... Read More about In-class e-testing of statistics in a large cohort of diverse ability.

E-assessment of computer programming (2018)
Presentation / Conference
Gwynllyw, R., & Smith, J. (2018, September). E-assessment of computer programming. Paper presented at 12th International Symposium on Advances in Technology Education Nurturing Professionals for Smart Cities: Way Forward for Technology Education, Hong Kong

This paper demonstrates how we have used Dewis, an algorithmic open source e-assessment system, to automatically assess programming skills, in particular, in the C programming language. Teaching and assessing programming skills is challenging; prior... Read More about E-assessment of computer programming.

Towards zero emission engines through the adoption of combustion lead engine design realised through a split cycle topology (2018)
Presentation / Conference
Khalid, F., Harvey, S., Morgan, R., Vogiatzaki, K., Atkins, A., Mason, D., & Heikal, M. (2018, September). Towards zero emission engines through the adoption of combustion lead engine design realised through a split cycle topology. Paper presented at Thermo and fluid dynamic processes in direct injection engines (THIESEL) conference, Valencia, Spain

Although electrification is expected to dominate city transportation, chemically fuelled propulsion systems will remain the technology of choice for intercity freight transportation. This is due to the high journey energy requirements that cannot be... Read More about Towards zero emission engines through the adoption of combustion lead engine design realised through a split cycle topology.

Real-time electromagnetic tracking of orthopaedic pins for robot-assisted fracture surgery (2018)
Presentation / Conference
Martins, B., Dagnino, G., & Dogramadzi, S. (2018, September). Real-time electromagnetic tracking of orthopaedic pins for robot-assisted fracture surgery. Presented at Computer and Robot Assisted Surgery (CRAS), London, England

Tracking devices are an essential component in image guided surgery particularly when precise treatment or implant positioning are required. In this paper we explore the use of an electromagnetic tracking device (Polaris Aurora, NDI Inc.) as an alter... Read More about Real-time electromagnetic tracking of orthopaedic pins for robot-assisted fracture surgery.