All Outputs (10)

Size-dependent nonlinear secondary resonance of micro-/nano-beams made of nano-porous biomaterials including truncated cube cells (2018)
Journal Article
Sahmani, S., Fotouhi, M., & Aghdam, M. M. (2019). Size-dependent nonlinear secondary resonance of micro-/nano-beams made of nano-porous biomaterials including truncated cube cells. Acta Mechanica, 230(3), 1077-1103. https://doi.org/10.1007/s00707-018-2334-9

© 2018, Springer-Verlag GmbH Austria, part of Springer Nature. Porous biomaterials have been utilized in cellular structures in order to mimic the function of bone as a branch of tissue engineering approach. With the aid of nano-porous biomaterials i... Read More about Size-dependent nonlinear secondary resonance of micro-/nano-beams made of nano-porous biomaterials including truncated cube cells.

Improvement of the impact properties of composite laminates by means of nano-modification of the matrix-A review (2018)
Journal Article
Saghafi, H., Fotouhi, M., & Minak, G. (2018). Improvement of the impact properties of composite laminates by means of nano-modification of the matrix-A review. Applied Sciences, 8(12), 2406. https://doi.org/10.3390/app8122406

© 2017 by the authors. This paper reviews recent works on the application of nanofibers and nanoparticle reinforcements to enhance the interlaminar fracture toughness, to reduce the impact induced damage and to improve the compression after impact pe... Read More about Improvement of the impact properties of composite laminates by means of nano-modification of the matrix-A review.

Investigating the pre-damaged PZT sensors under impact traction (2018)
Journal Article
Fotouhi, S., Fotouhi, M., Pavlovic, A., & Djordjevic, N. (2018). Investigating the pre-damaged PZT sensors under impact traction. Journal of Marine Science and Engineering, 6(4), 142. https://doi.org/10.3390/jmse6040142

© 2018 by the authors. Ships are usually under vibration, impact, and other kinds of static and dynamic loads. These loads arise from water flow across the hull or surfaces, the propeller cavitation, and so on. For optimal design purposes and reliabl... Read More about Investigating the pre-damaged PZT sensors under impact traction.

Pseudo-ductility of unidirectional thin ply hybrid composites in longitudinal compression (2018)
Presentation / Conference
Suwarta, P., Czel, G., Fotouhi, M., Rycerz, J., & Wisnom, M. (2018, September). Pseudo-ductility of unidirectional thin ply hybrid composites in longitudinal compression. Presented at ASC 33rd Annual Technical Conference, Seattle, USA

The compression response of unidirectional thin-ply carbon (C) standard thickness S-glass (SG) hybrid composites is presented. Gradual failure up to high strain has been demonstrated for [SG1/(C1/SG1)17] and [SG1/(C2/SG1)17] hybrid configurations. T... Read More about Pseudo-ductility of unidirectional thin ply hybrid composites in longitudinal compression.

Compact tension test behaviour of Pseudo-ductile thin-ply carbon/ glass hybrids (2018)
Presentation / Conference
Fotouhi, M., Jalalvand, M., Xu, X., & Wisnom, M. (2018, September). Compact tension test behaviour of Pseudo-ductile thin-ply carbon/ glass hybrids. Presented at ICCS21, Bologna, Italy

The aim of this work was to investigate the notched behaviour of thin ply pseudo-ductile carbon/glass hybrid laminates with in-plane Over-height Compact Tension (OCT) specimens. Therefore, a series of tests were performed on two different thin-ply ca... Read More about Compact tension test behaviour of Pseudo-ductile thin-ply carbon/ glass hybrids.

Bearing and bearing-bypass of pseudo-ductile thin-ply carbon/ glass hybrids (2018)
Presentation / Conference
Fotouhi, M., Jalalvand, M., Wu, X., & Wisnom, M. (2018, September). Bearing and bearing-bypass of pseudo-ductile thin-ply carbon/ glass hybrids. Presented at ICCS21, Bologna, Italy

The aim of this work was to investigate the bearing and bearing-bypass behaviour of thin ply pseudo-ductile carbon/glass hybrid laminates in tension. Therefore, a series of tests were performed based on ASTM D7248/D7248M–12 on a Quasi Isotropic (QI)... Read More about Bearing and bearing-bypass of pseudo-ductile thin-ply carbon/ glass hybrids.

Notch insensitive orientation-dispersed pseudo-ductile thin-ply carbon/glass hybrid laminates (2018)
Journal Article
Fotouhi, M., Jalalvand, M., & Wisnom, M. R. (2018). Notch insensitive orientation-dispersed pseudo-ductile thin-ply carbon/glass hybrid laminates. Composites Part A: Applied Science and Manufacturing, 110, 29-44. https://doi.org/10.1016/j.compositesa.2018.04.012

© 2018 Notch sensitivity, free edge delamination and brittle failure are limiting factors for the wider use of conventional composite laminates. In our previous study, a hybrid layup concept with the different materials blocked together but with disp... Read More about Notch insensitive orientation-dispersed pseudo-ductile thin-ply carbon/glass hybrid laminates.

The study of buckling and post-buckling behavior of laminated composites consisting multiple delaminations using acoustic emission (2018)
Journal Article
Sobhani, A., Saeedifar, M., Najafabadi, M. A., Fotouhi, M., & Zarouchas, D. (2018). The study of buckling and post-buckling behavior of laminated composites consisting multiple delaminations using acoustic emission. Thin-Walled Structures, 127, 145-156. https://doi.org/10.1016/j.tws.2018.02.011

© 2018 Elsevier Ltd This study introduces a comprehensive set of designed and tested glass/epoxy composites, AE monitoring and signal processing techniques; (i) to investigate the effect of multiple delaminations on buckling and post-buckling behavio... Read More about The study of buckling and post-buckling behavior of laminated composites consisting multiple delaminations using acoustic emission.

Acoustic emission monitoring of thin ply hybrid composites under repeated quasi-static tensile loading (2018)
Journal Article
Fotouhi, M., Suwarta, P., Jalalvand, M., Czél, G., & Wisnom, R. M. (2018). Acoustic emission monitoring of thin ply hybrid composites under repeated quasi-static tensile loading. FME Transactions, 46(2), 238-244. https://doi.org/10.5937/fmet1802238F

© Faculty of Mechanical Engineering, Belgrade. This paper investigates the applicability of the acoustic emission (AE) technique for identification of the damage onset and accumulation in SGlass/ TR30-Carbon hybrid laminates under repeated quasi-stat... Read More about Acoustic emission monitoring of thin ply hybrid composites under repeated quasi-static tensile loading.

Residual stress evaluation in friction stir welding of aluminum plates by means of acoustic emission and ultrasonic waves (2018)
Journal Article
Sadeghi, S., Zarif Karimi, N., Fotouhi, M., Hasani, M., Najafabadi, M. A., & Pavlovic, A. (2018). Residual stress evaluation in friction stir welding of aluminum plates by means of acoustic emission and ultrasonic waves. FME Transactions, 46(2), 230-237. https://doi.org/10.5937/fmet1802230S

© Faculty of Mechanical Engineering, Belgrade. The residual stress assessment in structures is essential for optimization of the structures' design. The attention of this paper is focused on how acoustic emission signals caused by tensile loading of... Read More about Residual stress evaluation in friction stir welding of aluminum plates by means of acoustic emission and ultrasonic waves.