Skip to main content

Research Repository

Advanced Search

All Outputs (138)

Further development of a variable camber morphing mechanism using the direct control airfoil geometry concept (2018)
Presentation / Conference Contribution

This paper reports on the design, manufacture and testing of an improved variable camber morphing wing mechanism following the study by Evans et al. (2016), who employed the so-called Direct Control Airfoil Geometry (DCAG) concept to actuate the trai... Read More about Further development of a variable camber morphing mechanism using the direct control airfoil geometry concept.

Slat broadband noise prediction of multi-element 30P30N airfoil by a hybrid RANS-LES method (2018)
Presentation / Conference Contribution

This paper presents a combined CFD and CAA study to assess the slat noise emissions from a multi-element 30P30N airfoil at the 5-degree and 8-degree angle of attack, using a hybrid RANS-LES method. In this simulation, the structured mesh is used and... Read More about Slat broadband noise prediction of multi-element 30P30N airfoil by a hybrid RANS-LES method.

Aerodynamic analysis of a harmonically morphing flap using a hybrid turbulence model and dynamic meshing (2018)
Presentation / Conference Contribution

© 2018, American Institute of Aeronautics and Astronautics Inc, AIAA. All rights reserved. A numerical study of the NACA 0012 airfoil fitted with a harmonically morphing trailing edge flap (TEF) is performed at an angle of attack of 4º and a Reynolds... Read More about Aerodynamic analysis of a harmonically morphing flap using a hybrid turbulence model and dynamic meshing.

Direct numerical simulation of a tip-leakage vortex model in a planar duct with a longitudinal slit (2017)
Presentation / Conference Contribution

A computational model of a planar duct with a cross flow injected from a longitudinal slit on the top of the duct is developed to study the tip-leakage vortex (TLV) which is one of the most important flow phenomena within the rotor of turbomachinery.... Read More about Direct numerical simulation of a tip-leakage vortex model in a planar duct with a longitudinal slit.

Large-scale secondary vortices in the turbulent channel flow induced by active wall actuations (2017)
Presentation / Conference Contribution

Direct numerical simulations (DNS) of the turbulent channel flow with spanwise alternatively distributed out-of-phase (OP) and in-phase (IP) wall actuations strips (SADS) are conducted to investigate the characteristics of the large-scale streamwise... Read More about Large-scale secondary vortices in the turbulent channel flow induced by active wall actuations.

Large-scale Secondary Vortices Generated by Wall Actuations: Application to the Turbulent Channel Flow (2017)
Presentation / Conference Contribution

The large-scale streamwise vortex (LSSV) generation mechanism in the turbulent boundary layer is closely linked to the turbulent mixing process and its potential to suppress flow separation. Direct numerical simulations (DNSs) of weakly compressible... Read More about Large-scale Secondary Vortices Generated by Wall Actuations: Application to the Turbulent Channel Flow.