An experimental study on non-destructive evaluation of the mechanical characteristics of a sustainable concrete incorporating industrial waste

Umar, Tariq; Yousaf, Muhammad; Akbar, Muhammad; Abbas, Nadeem; Hussain, Zahoor; Ansari, Wajahat Sammer

Abstract

Structural materials sustainability is gaining popularity across the globe at present. Reusing natural resources, building, demolition debris, and solid waste are the most apparent tools to make construction more environmentally friendly. Traditional concrete is believed to be less durable, stronger, environmentally friendly, and socially and commercially feasible than industrial waste concrete. The evolution of non-destructive testing (NDT) across time has not been investigated in depth by researchers. An experimental study was carried out to propose the use of non-destructive mechanisms that would enable us to assess concrete’s compressive strength without causing destruction. Varying quantities of industrial waste (coal bottom ash (CBA) and waste glass sludge (WGS)) were incorporated to cast concrete prisms (150 mm × 150 mm × 150 mm). The results obtained helped us to establish relationships between the compressive strength of concrete and the Schmidt hammer rebound value, as well as the ultrasonic pulse velocities. Microstructural analysis showed that incorporating 10% of CBA and WGS improved the porosity of concrete specimens, which shows the applicability of these industrial wastes as partial cement replacements. Scanning electron microscopy (SEM) showed traces of calcium alumino-silicate hydrate (C-A-S-H), portlandite and C-S-H, which indicates the binder characteristics of CBA and WGS. The concept of the response surface approach (RSM) for optimizing cement and industrial waste substitution was validated by the polynomial work expectation. The model was statistically significant when the fluctuation of ANOVA was analyzed using a p value with a significance level of 0.05. The study results show that the usage of 15% CBA and 10% WGS as a cementitious additive and cement replacement has the potential to increase the strength of concrete significantly.

Citation

Umar, T., Yousaf, M., Akbar, M., Abbas, N., Hussain, Z., & Ansari, W. S. (2022). An experimental study on non-destructive evaluation of the mechanical characteristics of a sustainable concrete incorporating industrial waste. Materials, 15(20), 7346. https://doi.org/10.3390/ma15207346

• Journal Article Type: Article
• Acceptance Date: Oct 18, 2022
• Online Publication Date: Oct 20, 2022
• Publication Date: Oct 20, 2022
• Deposit Date: Nov 9, 2022
• Publicly Available Date: Nov 9, 2022
• Journal: Materials
• Print ISSN: 1996-1944
• Electronic ISSN: 1996-1944
• Publisher: MDPI
• Peer Reviewed: Peer Reviewed
• Volume: 15
• Issue: 20
• Pages: 7346
• Series Title: Carbon Peaking and Carbon Neutrality in the Cement-Based Materials
• DOI: https://doi.org/10.3390/ma15207346
• Keywords: Article, concrete, industrial waste, mechanical properties, non-destructive testing, ANOVA, SEM, CBA, WGS
• Public URL: https://uwe-repository.worktribe.com/output/10121872
• Publisher URL: https://www.mdpi.com/1996-1944/15/20/7346
• Related Public URLs: https://www.mdpi.com/journal/materials/special_issues/Carbon_Cement_Materials