Outputs (2234)

The built environment’s contribution to the progress of the sustainable development goals (2024)
Book Chapter
Umar, T., Opoku, A., Umeokafor, N., & Ahmed, S. (2024). The built environment’s contribution to the progress of the sustainable development goals. In A. Opoku (Ed.), The Elgar Companion to the Built Environment and the Sustainable Development Goals. Edward Elgar Publishing

It is now more than six years since the United Nations (UN) Sustainable Development Goals (SDGs) were agreed to be achieved by all member countries by 2030. While the deadline is approaching fast, still much of the counties are not on track to achiev... Read More about The built environment’s contribution to the progress of the sustainable development goals.

The nature and extent of bomb tritium remaining in deep vadose zone: A synthesis and prognosis (2024)
Journal Article
Huang, Y., Evaristo, J., Li, Z., Chun, K., Sutanudjaja, E. H., Cardenas, M. B., …van Genuchten, M. T. (in press). The nature and extent of bomb tritium remaining in deep vadose zone: A synthesis and prognosis. Vadose Zone Journal, https://doi.org/10.1002/vzj2.20304

Tritium present in deep vadose zones is a useful tracer for estimating groundwater recharge, but its full utility is constrained by not knowing where and for how long the tritium tracing method remains applicable. We obtained 44 tritium profiles from... Read More about The nature and extent of bomb tritium remaining in deep vadose zone: A synthesis and prognosis.

Post-Occupancy study of indoor air quality in university laboratories during the pandemic (2023)
Conference Proceeding
Adzic, F., Mustafa, M., Wild, O., Cheung, H. Y. W., & Malki-Epshtein, L. (2023). Post-Occupancy study of indoor air quality in university laboratories during the pandemic. In Proceedings of the 17th International Conference of the International Society of Indoor Air Quality & Climate (Indoor Air 2022) (1-8)

This post-occupancy study aims to assess the indoor air quality (IAQ) and ventilation performance in workshops and laboratories of a UK university during the COVID-19 pandemic. Supply airflow rates and CO2 were monitored as a proxy for evaluating ven... Read More about Post-Occupancy study of indoor air quality in university laboratories during the pandemic.

The confluence of Industry 4.0 and construction occupational safety, health and well-being (2023)
Book Chapter
Manu, P., Gao, S., Da Silva Bartolo, P. J., Francis, V., & Sawhney, A. (2023). The confluence of Industry 4.0 and construction occupational safety, health and well-being. In P. Manu, S. Gao, P. J. D. S. Bartolo, V. Francis, & A. Sawhney (Eds.), Handbook of Construction Safety, Health and Well-being in the Industry 4.0 Era (1-14). London: Taylor & Francis (Routledge). https://doi.org/10.1201/9781003213796-1

Globally, the construction sector accounts for more than100,000 occupational fatalities annually. There is an urgent need to improve the poor occupational safety, health and well-being (OSHW) outlook of the construction sector. The advent of the four... Read More about The confluence of Industry 4.0 and construction occupational safety, health and well-being.

Application of exoskeletons for occupational safety and health management in construction (2023)
Book Chapter
Babalola, A., Urhal, P., Manu, P., Da Silva Bartolo, P. J., Cheung, C., Yunusa-Kaltungo, A., …Paton-Cole, V. (2023). Application of exoskeletons for occupational safety and health management in construction. In P. Manu, S. Gao, P. J. S. Bartolo, V. Francis, & A. Sawhney (Eds.), Handbook of Construction Safety, Health and Well-being in the Industry 4.0 Era (249-264). London: Taylor & Francis (Routledge). https://doi.org/10.1201/9781003213796-23

The construction industry is a high-risk industry due to its poor record of injuries and deaths globally. Recently, exoskeletons, as part of a suite of Industry 4.0 technologies, have emerged as a potential effective technological approach for addres... Read More about Application of exoskeletons for occupational safety and health management in construction.

Low carbon heritage: Residents' views from Cumbria and the English Lake District World Heritage Site (2023)
Conference Proceeding
Wise, F., Moncaster, A., & Jones, D. (2023). Low carbon heritage: Residents' views from Cumbria and the English Lake District World Heritage Site. In R. Kilian, S. Saba, & C. Gietz (Eds.), EEHB 2022 Post Prints. The 4th International Conference on Energy Efficiency in Historic Buildings (219-227)

Carbon emissions from the built environment must be urgently reduced to mitigate climate change. Retrofit of existing buildings is key. However, heritage buildings pose a particular challenge, particularly domestic buildings where retrofit is mainly... Read More about Low carbon heritage: Residents' views from Cumbria and the English Lake District World Heritage Site.

Developing Industry 4.0 applications - A social construction of technology approach (2023)
Book Chapter
Collinge, W. H., Osorio-Sandoval, C. A., Manu, P., & Cheung, C. (2023). Developing Industry 4.0 applications - A social construction of technology approach. In P. Manu, S. Gao, P. Jorge Silva Bartolo, V. Francis, & A. Sawhney (Eds.), Handbook of Construction Safety, Health and Well-being in the Industry 4.0 Era (42-51). London: Taylor & Francis (Routledge). https://doi.org/10.1201/9781003213796-5

The design and development of Industry 4.0 applications requires focused research work and close collaboration with the industry. Such an approach requires a balance between technical work and social interactions with industry partners: a social cons... Read More about Developing Industry 4.0 applications - A social construction of technology approach.

Artificial intelligence for occupational health and safety management in construction (2023)
Book Chapter
Perera, S., Paton-Cole, V., Gao, S., Francis, V., Urhal, P., Manu, P., …Babalola, A. (2023). Artificial intelligence for occupational health and safety management in construction. In P. Manu, S. Gao, P. J. S. Bartolo, V. Francis, & A. Sawhney (Eds.), Handbook of Construction Safety, Health and Well-being in the Industry 4.0 Era (154-168). London: Taylor & Francis (Routledge). https://doi.org/10.1201/9781003213796-15

Reducing occupational safety and health (OSH) incidents has been an area of significant importance to the construction industry. The industry remains one of the most dangerous, with significant occupational fatalities and injuries. Artificial intelli... Read More about Artificial intelligence for occupational health and safety management in construction.

Structural moves in Norlands (2023)
Book Chapter
Carless, T. (2023). Structural moves in Norlands. In Possible Futures. (10). University of the Arctic’s Arctic Sustainable Arts and Design thematic network (ASAD), Yukon University, and University of Lapland: Insea Publications

This chapter is derived from an interdisciplinary panel group who were participants of an online symposium Relate North 10: Possible Futures hosted by Yukon University Canada January 27-28 2023. The participants included Magnus Mårtesson (MM), Hous... Read More about Structural moves in Norlands.

Combining design thinking and systems engineering in a large engineering organisation (2023)
Thesis
Robertson, B. Combining design thinking and systems engineering in a large engineering organisation. (Thesis). University of the West of England. Retrieved from https://uwe-repository.worktribe.com/output/10197722

Design processes and the management of design processes are critical components of the ability for engineering organisations to generate revenue and create innovative solutions to societal problems. Furthermore, appropriate design processes are prese... Read More about Combining design thinking and systems engineering in a large engineering organisation.