Outputs (30)

Optimized activated carbon cathode in membraneless single chamber microbial fuel cell treating acetate (2013)
Presentation / Conference Contribution

Copyright © 2013 Delta Energy and Environment. Activated Carbon (AC) have been used as cheap alternative cathode for microbial fuel cell (MFC) applications. Different parameters (applied pressure and temperature treatment) have been changed and the c... Read More about Optimized activated carbon cathode in membraneless single chamber microbial fuel cell treating acetate.

Algal "lagoon" effect for oxygenating MFC cathodes (2013)
Presentation / Conference Contribution

Copyright © 2013 Delta Energy and Environment. This paper describes the active oxygenation performed by the photosynthetic organisms in the cathode of a two-chamber Microbial Fuel Cell system. The algal growth provided dissolved oxygen to the cathode... Read More about Algal "lagoon" effect for oxygenating MFC cathodes.

Smart miniature microbial fuel cell design for increased electricity generation and waste water treatment (2013)
Presentation / Conference Contribution

Copyright © 2013 Delta Energy and Environment. Microbial Fuel Cells (MFCs) are a green sustainable energy with minimal carbon footprint, suitable for wastewater remediation and generation of useful amounts of electricity. This study focuses on the ar... Read More about Smart miniature microbial fuel cell design for increased electricity generation and waste water treatment.

Towards disposable microbial fuel cells: Natural rubber glove membranes (2013)
Presentation / Conference Contribution

Copyright © 2013 Delta Energy and Environment. Natural rubber from laboratory gloves (GNR) was compared to cation exchange membrane (CEM) in microbial fuel cells (MFC). GNR-MFCs produced an immediate working voltage (50mV) indicating the availability... Read More about Towards disposable microbial fuel cells: Natural rubber glove membranes.

Mechanical properties and microstructure of thin plates of A6061 wrought aluminum alloy using rheology forging process with electromagnetic stirring (2013)
Presentation / Conference Contribution

We propose the possibility of fabricating A6061 thin plates using the rheology forging process. Electromagnetic stirring (EMS) is used to fabricate a semi-solid slurry. A thin plate is formed by injecting the slurry into the forging die. When the pun... Read More about Mechanical properties and microstructure of thin plates of A6061 wrought aluminum alloy using rheology forging process with electromagnetic stirring.

The effect of billets extruded by a curved and flat-face die on the semisolid characteristics and tensile properties of thixoformed products (2013)
Journal Article

In this study, A356 aluminum billets in different extruded states are used as feedstock for the thixoforming. The extrusion billets were fabricated by a hot extrusion process through a flat-face and a curved die. After the induction reheating of the... Read More about The effect of billets extruded by a curved and flat-face die on the semisolid characteristics and tensile properties of thixoformed products.

Processing of low-carbon cast steels for offshore structural applications (2013)
Journal Article

Cast steels with carbon contents of approximately 0.05%, 0.1%, and 0.2% (low-carbon steels) were processed. The investigated steels were first cast. Fully lath martensite was obtained after austenitization and water quenching of the cast steels. The... Read More about Processing of low-carbon cast steels for offshore structural applications.

Biodegradation and proton exchange using natural rubber in microbial fuel cells (2013)
Journal Article

Microbial fuel cells (MFCs) generate electricity from waste but to date the technology's development and scale-up has been held-up by the need to incorporate expensive materials. A costly but vital component is the ion exchange membrane (IEM) which c... Read More about Biodegradation and proton exchange using natural rubber in microbial fuel cells.

Comparing terracotta and earthenware for multiple functionalities in microbial fuel cells (2013)
Journal Article

The properties of earthenware and terracotta were investigated in terms of structural integrity and ion conductivity, in two microbial fuel cell (MFC) designs. Parameters such as wall thickness (4, 8, 18 mm), porosity and cathode hydration were analy... Read More about Comparing terracotta and earthenware for multiple functionalities in microbial fuel cells.

The power of glove: Soft microbial fuel cell for low-power electronics (2013)
Journal Article

A novel, soft microbial fuel cell (MFC) has been constructed using the finger-piece of a standard laboratory natural rubber latex glove. The natural rubber serves as structural and proton exchange material whilst untreated carbon veil is used for the... Read More about The power of glove: Soft microbial fuel cell for low-power electronics.

Waste to real energy: The first MFC powered mobile phone (2013)
Journal Article

This communication reports for the first time the charging of a commercially available mobile phone, using Microbial Fuel Cells (MFCs) fed with real neat urine. The membrane-less MFCs were made out of ceramic material and employed plain carbon based... Read More about Waste to real energy: The first MFC powered mobile phone.

Making films in Somerset (2013)
Presentation / Conference Contribution

A talk to young filmmakers about my work as a filmmaker, growing up in Somerset and how to get films made. Tips and contacts given to encourage young filmmakers to apply for BFI funding schemes and film academies in Bristol and Somerset. Also screene... Read More about Making films in Somerset.

Energy production and sanitation improvement using microbial fuel cells (2013)
Journal Article

This study builds on the previous work of urine utilisation and uses small-scale microbial fuel cells (MFCs), working both as individual units in cascade or collectively as a stack, to utilise artificial urine. Artificial urine was prepared at concen... Read More about Energy production and sanitation improvement using microbial fuel cells.

Urine: Waste or resource? The economic and social aspects (2013)
Journal Article

Sub-millilitre microbial fuel cell power for soft robots (2013)
Presentation / Conference Contribution

Conventional rigid-body robots operate using actuators which differ markedly from the compliant, muscular bodies of biological organisms that generate their energy through organic metabolism. We consider an 'artificial stomach' comprised of a single... Read More about Sub-millilitre microbial fuel cell power for soft robots.

Photosynthetic cathodes for microbial fuel cells (2013)
Presentation / Conference Contribution

One of the major limiting factors in the practical implementation of Microbial Fuel Cells is finding efficient and sustainable catalysts for the cathode half reaction, in an attempt to avoid expensive and/or toxic catalysts. The use of phototrophic o... Read More about Photosynthetic cathodes for microbial fuel cells.

Increased power output from micro porous layer (MPL) cathode microbial fuel cells (MFC) (2013)
Presentation / Conference Contribution

Microbial fuel cells are bio-electrochemical transducers that utilise microorganisms to generate electricity, through the oxidation of organic matter. They consist of a negative anode and a positive cathode, separated by an ion selective membrane. Th... Read More about Increased power output from micro porous layer (MPL) cathode microbial fuel cells (MFC).

Power generation and contaminant removal in single chamber microbial fuel cells (SCMFCs) treating human urine (2013)
Presentation / Conference Contribution

The potential of single chamber microbial fuel cells (SCMFC) to treat raw, fresh human urine was investigated. The power generation (55 μW) of the SCMFCs with platinum (Pt)-based cathode was higher than those with Pt-free cathodes (23 μW) at the begi... Read More about Power generation and contaminant removal in single chamber microbial fuel cells (SCMFCs) treating human urine.

Rheoforging of thin case for IT devices with optimal process parameters and new type die design (2013)
Journal Article

The latest trend in the cell phone component industry to use aluminium and magnesium alloys has resulted in the advanced processing technologies. Semi-solid forming process that is advantageous for the mass production of thin parts with complex shape... Read More about Rheoforging of thin case for IT devices with optimal process parameters and new type die design.

Use of an in vitro flat-bed biofilm model to measure biologically active anti-odour compounds (2013)
Journal Article

The objective of this study was to demonstrate the utility of a modified flat-bed perfusion biofilm matrix system for testing toothpaste formulations directly, without dilution, as a layer in direct contact with the biofilm matrix surface. Final biof... Read More about Use of an in vitro flat-bed biofilm model to measure biologically active anti-odour compounds.