All Outputs (138)

Assessment of stress-blended eddy simulation model for accurate performance prediction of vertical axis wind turbine (2020)
Journal Article

Purpose: The aim of this paper is to assess the ability of a stress-blended eddy simulation (SBES) turbulence model to predict the performance of a three-straight-bladed vertical axis wind turbine (VAWT). The grid sensitivity study is conducted to ev... Read More about Assessment of stress-blended eddy simulation model for accurate performance prediction of vertical axis wind turbine.

The effect of gurney flap on flow characteristics of vertical axis wind turbine (2020)
Journal Article

Recently, the Gurney Flap (GF) has been used to improve the performance of Horizontal Axis Wind Turbine (HAWT) by enhancing its lift coefficient. Compared to HAWT, research on GF application for Vertical Axis Wind Turbine (VAWT) is very limited. More... Read More about The effect of gurney flap on flow characteristics of vertical axis wind turbine.

Dynamic mesh framework for morphing wings CFD - User defined function (2020)
Digital Artefact

This project contains the user-defined functions (UDF) necessary to perform unsteady computational fluid dynamics (CFD) analysis of dynamically morphing wings equipped with morphing flaps.

There are three UDFs for each of the following application... Read More about Dynamic mesh framework for morphing wings CFD - User defined function.

An Investigation of a Morphing Flapped Wing (2020)
Presentation / Conference Contribution

This study investigated the design, development, and validation of an alternative method to achieve morphing in wings through the implementation of a sliding mechanism concept. Performance was tested at a specific Reynolds number (Re = 0.62 × 106). M... Read More about An Investigation of a Morphing Flapped Wing.

A composite feedback approach to stabilize nonholonomic systems with time varying time delays and nonlinear disturbances (2020)
Journal Article

In this work, we propose a robust stabilizer for nonholonomic systems with time varying time delays and nonlinear disturbances. The proposed approach implements a composite nonlinear feedback structure in which a linear controller is designed to yiel... Read More about A composite feedback approach to stabilize nonholonomic systems with time varying time delays and nonlinear disturbances.

Direct numerical simulation of a tip-leakage flow in a planar duct with a longitudinal slit (2019)
Journal Article

A planar duct flow configuration with a cross-flow injected from a longitudinal slit close to the upper wall of the duct is studied by using a direct numerical simulation approach to explore the underlying flow mechanism in relation to the tip-leakag... Read More about Direct numerical simulation of a tip-leakage flow in a planar duct with a longitudinal slit.

A GIS-MOPSO integrated method for optimal design of grid-connected HRES for educational buildings (2019)
Presentation / Conference Contribution

 Abstract. In this paper, an optimal design of a grid-connected PV-battery-hydrogen hybrid renewable energy system (HRES) at a University campus in Ouargla, Algeria is carried out. To achieve this goal, geographical information system (GIS), CAD sof... Read More about A GIS-MOPSO integrated method for optimal design of grid-connected HRES for educational buildings.

Detached eddy simulation of blade trailing-edge cutback cooling performance at various ejection slot angles (2019)
Journal Article

© 2019 Elsevier Inc. Detached eddy simulation (DES) has been carried out to study a three-dimensional trailing-edge (TE) cutback turbine blade model with five rows of staggered circular pin-fin arrays inside the cooling passage, in order to evaluate... Read More about Detached eddy simulation of blade trailing-edge cutback cooling performance at various ejection slot angles.

Blockchain enabled industrial Internet of Things technology (2019)
Journal Article

The emerging blockchain technology shows promising potential to enhance industrial systems and the Internet of things (IoT) by providing applications with redundancy, immutable storage, and encryption. In the past a few years, many more applications... Read More about Blockchain enabled industrial Internet of Things technology.

Pin-fin shape and orientation effects on wall heat transfer predictions of gas turbine blade (2019)
Presentation / Conference Contribution

Turbine blades are often exposed to the ‘hot’ gas environment and thus it is essential to apply effective cooling technique to extend the blade lifetime. In the present work, wall heat transfer characteristics inside a blade trailing-edge coolant pas... Read More about Pin-fin shape and orientation effects on wall heat transfer predictions of gas turbine blade.

Numerical study of pin-fin cooling on gas turbine blades (2019)
Presentation / Conference Contribution

This paper describes a numerical study of internal pin-fin cooling performance of a trailing-edge cutback configuration for gas turbine blade. The study was performed at two steps: first, to validate simulation results from an existing TE cutback coo... Read More about Numerical study of pin-fin cooling on gas turbine blades.

Influence of non-iterative time-advancement schemes on the aerodynamic prediction of pitching airfoils using dynamic mesh (2019)
Presentation / Conference Contribution

A pitching airfoil problem is addressed in this paper to assess the use of a non-iterative time-advancement (NITA) scheme with dynamic mesh method, and also to estimate possible CPU time savings. Simulations have shown that using a combination of dyn... Read More about Influence of non-iterative time-advancement schemes on the aerodynamic prediction of pitching airfoils using dynamic mesh.

Flow response to rapid morphing flap deflection (2019)
Presentation / Conference Contribution

Flow response to rapid morphing flap deflection is
investigated at a Reynolds number based on chord of
0.62×10^6 for a 2D NACA 0012 airfoil fitted with a
morphing Trailing-edge flap (TEF) at a range of angles
of attack and morphing frequencies. T... Read More about Flow response to rapid morphing flap deflection.

Assessment of stress-blended eddy simulation model for accurate prediction of three-straight-bladed vertical axis wind turbine performance (2019)
Presentation / Conference Contribution

The performance of a three-straight-bladed vertical axis wind turbine at low tip speed ratio has been evaluated by detached eddy simulation (DES) with stress-blended eddy simulation (SBES) turbulence model. Two grid topologies around the blades, i.e.... Read More about Assessment of stress-blended eddy simulation model for accurate prediction of three-straight-bladed vertical axis wind turbine performance.

Flow separation control over a rounded ramp with spanwise alternating wall actuation (2019)
Journal Article

An implicit large-eddy simulation is carried out to study turbulent boundary-layer separation from a backward-facing rounded ramp with active wall actuation control. This method, called spanwise alternating distributed strips control, is imposed onto... Read More about Flow separation control over a rounded ramp with spanwise alternating wall actuation.

Selecting nozzle arrangement of a chimney tower to reduce the temperature and to increase the entrainment mass flow (2018)
Journal Article

© TJPRC Pvt. Ltd. The aim of this research work was to find the best arrangement of nozzles inside the chimney tower to reduce the temperature and to increase the entrainment mass flow. An existing design of the nozzle arrangement was used as the ref... Read More about Selecting nozzle arrangement of a chimney tower to reduce the temperature and to increase the entrainment mass flow.

CFD simulation of three-straight-bladed vertical axis wind turbine at low tip speed ratios (2018)
Presentation / Conference Contribution

This paper presents computational fluid dynamics (CFD) simulations of a three-straight-bladed Vertical Axis Wind Turbine (VAWT) operating at a wind speed of 9 m/s and low Tip Speed Ratio (TSR) ranging from 1.44 to 3.3. The turbine blade has NACA 0021... Read More about CFD simulation of three-straight-bladed vertical axis wind turbine at low tip speed ratios.

A review of current technical development in vertical axis wind turbine technologies and their braking system for low speed, urban and offshore areas application (2018)
Presentation / Conference Contribution

Recently, there are growing interests of using Vertical Axis Wind Turbine (VAWT) to harvest wind energy from low wind speed in urban areas to relatively high wind speed in offshore wind farms. Horizontal Axis Wind Turbine (HAWT) has been known to hav... Read More about A review of current technical development in vertical axis wind turbine technologies and their braking system for low speed, urban and offshore areas application.

Zeolite supported platinum nanoparticles for small organic molecule oxidation and reduction in fuel cell using impregnation (2018)
Presentation / Conference Contribution

The influence of valve-pump weight ratios on the dynamic response of leaking valve-pump parallel control hydraulic systems (2018)
Journal Article

© 2018 by the authors. A new leaking valve-pump parallel control (LVPC) oil hydraulic system is proposed to improve the performance of dynamic response of present variable speed pump control (VSPC) system, which is an oil hydraulic control system wit... Read More about The influence of valve-pump weight ratios on the dynamic response of leaking valve-pump parallel control hydraulic systems.