Jonathan Winfield Jonathan.Winfield@uwe.ac.uk
School Director (Learning & Teaching)
Investigating the effects of fluidic connection between microbial fuel cells
Winfield, Jonathan; Ieropoulos, Ioannis; Greenman, John; Dennis, Julian
Authors
Yannis Ieropoulos Ioannis2.Ieropoulos@uwe.ac.uk
Professor in Bioenergy & Director of B-B
John Greenman john.greenman@uwe.ac.uk
Julian Dennis
Abstract
Microbial fuel cells (MFCs) can 'treat' wastewater but individually are thermodynamically restricted. Scale-up might, therefore, require a plurality of units operating in a stack which could introduce losses simply through fluidic connections. Experiments were performed on two hydraulically joined MFCs (20 cm apart) where feedstock flowed first through the upstream unit (MFCup) and into the downstream unit (MFCdown) to explore the interactive effect of electrical load connection, influent make-up and flow-rate on electrical outputs. This set-up was also used to investigate how calculating total internal resistance based on a dynamic open circuit voltage (OCV) might differ from using the starting OCV. When fed a highly conductive feedstock (∼4,800 μS) MFCdown dropped approximately 180 mV as progressively heavier loads were applied to MFCup (independent of flow-rate) due to electron leakages through the medium. The conductivities of plain acetate solutions (5 and 20 mM) were insufficient to induce losses in MFCdown even when MFCup was operating at high current densities. However, at the highest flow-rate (240 mL/h) MFCdown dropped by approximately 100 mV when using 5 and 220 mV using 20 mM acetate. When the distance between MFCs was reduced by 5 cm, voltage drops were apparent even at lower flow-rates, (30 mL/h decreased the voltage by 115 mV when using 20 mM acetate). Shear flow-rates can introduce dissolved oxygen and turbulence all capable of affecting the anodic biofilm and redox conditions. Calculating total internal resistance using a dynamic OCV produced a more stable curve over time compared to that based on the starting constant OCV. © 2010 Springer-Verlag.
Journal Article Type | Article |
---|---|
Publication Date | May 1, 2011 |
Deposit Date | Aug 6, 2012 |
Publicly Available Date | Apr 10, 2016 |
Journal | Bioprocess and Biosystems Engineering |
Print ISSN | 1615-7591 |
Electronic ISSN | 1615-7605 |
Publisher | Springer (part of Springer Nature) |
Peer Reviewed | Peer Reviewed |
Volume | 34 |
Issue | 4 |
Pages | 477-484 |
DOI | https://doi.org/10.1007/s00449-010-0491-x |
Keywords | fluidic connection, microbial fuel cells |
Public URL | https://uwe-repository.worktribe.com/output/972389 |
Publisher URL | http://dx.doi.org/10.1007/s00449-010-0491-x |
Additional Information | Additional Information : The final publication is available at Springer via http://dx.doi.org/10.1007/s00449-010-0491-x |
Contract Date | Apr 10, 2016 |
Files
Fluidic connection for repository.pdf
(943 Kb)
PDF
You might also like
Towards disposable microbial fuel cells: Natural rubber glove membranes
(2014)
Journal Article
Fade to Green: A Biodegradable Stack of Microbial Fuel Cells
(2015)
Journal Article
Cast and 3D printed ion exchange membranes for monolithic microbial fuel cell fabrication
(2015)
Journal Article
Towards fully biodegradable microbial fuel cells
(2014)
Book Chapter
The power of glove: Soft microbial fuel cell for low-power electronics
(2013)
Journal Article
Downloadable Citations
About UWE Bristol Research Repository
Administrator e-mail: repository@uwe.ac.uk
This application uses the following open-source libraries:
SheetJS Community Edition
Apache License Version 2.0 (http://www.apache.org/licenses/)
PDF.js
Apache License Version 2.0 (http://www.apache.org/licenses/)
Font Awesome
SIL OFL 1.1 (http://scripts.sil.org/OFL)
MIT License (http://opensource.org/licenses/mit-license.html)
CC BY 3.0 ( http://creativecommons.org/licenses/by/3.0/)
Powered by Worktribe © 2024
Advanced Search