High-performance bio-inspired composite T-joints

Akrami, Roya; Fotouhi, Sakineh; Fotouhi, Mohamad; Bodaghi, Mahdi; Clamp, Joseph; Bolouri, Amir

Abstract

© 2019 Elsevier Ltd This paper introduces a novel bio-inspired design strategy based on the optimised topology of bird bone's joint to improve the strength-to-weight ratio and damage tolerance of composite T-joints. Better structuring the constituents' materials near the sharp bends results in re-distribution of stress over a larger area and reduces the stress concentration. This is done by an integrally formed support structure that is spaced apart from the main body of the T-joint in the vicinity of the bend using a Polyvinyl Chloride (PVC) foam. The support structure acts as a buttress across the bend and improves the performance of the T-joint. The T-joints are fabricated using wet layup process, from 2/2 twill TC35-carbon fibre fabric/SR5550 epoxy resin, and are subjected to quasi-static and fatigue bending, and quasi-static tensile pull-out tests. The quasi-static results reveal that the bio-inspired T-joint design has huge improvements compared to a conventional T-joint in the elastic stiffness (over 60%), peak load (over 40%) and absorbed mechanical energy (over 130%). There is only 3% weight increase in the bio-inspired T-joint compared to the conventional one. The fatigue results show a significant improvement for the bio-inspired design proving the efficiency of the novel bio-inspired design for both quasi-static and cyclic loadings.

Citation

Akrami, R., Fotouhi, S., Fotouhi, M., Bodaghi, M., Clamp, J., & Bolouri, A. (2019). High-performance bio-inspired composite T-joints. Composites Science and Technology, 184, Article 107840. https://doi.org/10.1016/j.compscitech.2019.107840

• Journal Article Type: Article
• Acceptance Date: Sep 28, 2019
• Online Publication Date: Sep 28, 2019
• Publication Date: Nov 10, 2019
• Deposit Date: Oct 7, 2019
• Publicly Available Date: Sep 29, 2020
• Journal: Composites Science and Technology
• Print ISSN: 0266-3538
• Publisher: Elsevier
• Peer Reviewed: Peer Reviewed
• Volume: 184
• Article Number: 107840
• DOI: https://doi.org/10.1016/j.compscitech.2019.107840
• Keywords: General Engineering; Ceramics and Composites; T-joint; Composite; Bio-inspired; Bending; Pull-out; Fatigue
• Public URL: https://uwe-repository.worktribe.com/output/3481989