Skip to main content

Research Repository

Advanced Search

Strength and Hydraulic Conductivity of Cement and By -Product Cementitious Materials Improved Soil

Abbey, Samuel Jonah; Ngambi, Samson; Olubanwo, Adegoke Omotayo; Tetteh, Francis Kofi

Authors

Profile Image

Samuel Abbey Samuel.Abbey@uwe.ac.uk
Associate Director - Engineering Practice and Management/Associate Professor

Samson Ngambi

Adegoke Omotayo Olubanwo

Francis Kofi Tetteh



Contributors

Abstract

This paper presents an experimental investigation on strength and hydraulic conductivity of a fine grained soil mixed with cement, Pulverised Fly Ash and Ground Granulated Blast Slag. Strength and permeability are important properties that defines the engineering behaviour of deep mixing improved soils. Cement contents of 4%, 8%, 12% and 16% by weight of dry soil were added using wet soil mixing technique. The percentages of cement were reduced and replaced with PFA, GGBS and Bentonite at 33.3% and 50% reductions respectively. Unconfined compressive strength (UCS) and permeability tests were conducted on cement, PFA/GGBS and Cement/Bentonite mixtures prepared at their respective optimum moisture content (OMC) and maximum dry density (MDD) and cured for different periods. The results show that an increase in % of additives causes decrease in porosity and increase in density of cement and cement/PFA stabilised soil and hence, increase in UCS. Except at some optimum values of 12% and 16% of additives in C+PFA combinations where the density of the improved soil decreases at fairly constant porosity resulting to an increase in UCS. This implies that % of additive and the type of additive controls the UCS of improved soils more than the influence of porosity and density on UCS. Decrease in porosity of samples improved using C+PFA+GGBS and C+B with increase in % of additives, resulted to increase in UCS but however, the reduction in density and increase in UCS also shows dominance of % and type of additive on strength over porosity and density. Cement-Bentonite and combination of PFA /GGBS with reduced amount of cement were observed to better improved permeability of the soil. This study has also defined the functional relationships between hydraulic conductivity and additive type based on the investigated % of additives and combinations.

Citation

Abbey, S. J., Ngambi, S., Olubanwo, A. O., & Tetteh, F. K. (2018). Strength and Hydraulic Conductivity of Cement and By -Product Cementitious Materials Improved Soil. International Journal of Applied Engineering Research, 13(10), 8684-8694

Journal Article Type Article
Acceptance Date Jan 1, 2018
Publication Date 2018-05
Deposit Date Sep 26, 2019
Journal International Journal of Applied Engineering Research
Print ISSN 0976-4259
Publisher Integrated Publishing Association
Peer Reviewed Peer Reviewed
Volume 13
Issue 10
Pages 8684-8694
Series ISSN 0973-4562
Keywords Strength; Permeability; Hydraulic conductivity; Deep Soil Mixing; Improved Soil; Cement; PFA; GGBS; Bentonite; fine grained soil
Public URL https://uwe-repository.worktribe.com/output/3283839
Publisher URL https://www.ripublication.com/ijaer18/ijaerv13n10_189.pdf