Peter Kay Peter2.Kay@uwe.ac.uk
Associate Director (Energy Technologies)
Sub-cooled and flashing liquid jets and droplet dispersion II. Scaled experiments and derivation of droplet size correlations
Kay, Peter J.; Bowen, Phillip J.; Witlox, Henk W.M.
Authors
Phillip J. Bowen
Henk W.M. Witlox
Abstract
This paper describes the results of the first stage of Phase III of a Joint Industry Project (JIP) on liquid jets and two-phase droplet dispersion. This stage included scaled experiments for water, gasoline, and cyclohexane for a range of superheats and nozzles with different aspect ratios. Additional experiments for butane and propane were conducted as a validation exercise and are discussed in the companion paper. Moreover this paper provides recommendations for atomisation correlations in the regimes of mechanical break-up, transition to flashing, and fully flashing. The objectives of this scaled experimental programme are to: (i) provide confidence in the previously proposed modelling methodology (Phase II) across a broad range of initial conditions (ii) update the models' correlations to generalise further its applicability (iii) recommend further model improvements. Development of new correlations for Sauter Mean Droplet diameter (SMD) and droplet size distribution is based on a best fit of the current scaled experimental data. The new data endorses the previous tri-functional Phase II approach including regimes for mechanical break-up, transition to flashing, and fully flashing, which is hence updated in the new Phase III SMD model. Considerable effort is devoted to capturing the full droplet size range under low-superheat conditions. Also, new enhancements in PDA technology were adopted to enable better quality data under high-superheat conditions. The priority recommendation for further model improvement is better characterisation of the poor quality releases under low-superheat conditions, where this work indicates that extremely broad droplet size distributions are likely. A companion paper (Part I) presents a more general overview of the dispersion problem, implementation of the correlations and subsequent performance against both the current scaled experiments and additional large-scale butane experiments. © 2010 Elsevier Ltd.
Journal Article Type | Article |
---|---|
Publication Date | Nov 1, 2010 |
Journal | Journal of Loss Prevention in the Process Industries |
Print ISSN | 0950-4230 |
Publisher | Elsevier |
Peer Reviewed | Peer Reviewed |
Volume | 23 |
Issue | 6 |
Pages | 849-856 |
DOI | https://doi.org/10.1016/j.jlp.2010.07.006 |
Keywords | flashing liquid jets, droplet size, droplet dispersion, PDA, correlation development |
Public URL | https://uwe-repository.worktribe.com/output/986059 |
Publisher URL | http://dx.doi.org/10.1016/j.jlp.2010.07.006 |
You might also like
Validation of a CFD Model of a Hollow-Cone Spray with Gasoline Fuel Blends
(2011)
Presentation / Conference Contribution
TIR-LIF: a Validation Tool for Spray Impact Models
(2009)
Book Chapter
Quantification of transient fuel films under elevated ambient pressure environments
(2012)
Journal Article
Downloadable Citations
About UWE Bristol Research Repository
Administrator e-mail: repository@uwe.ac.uk
This application uses the following open-source libraries:
SheetJS Community Edition
Apache License Version 2.0 (http://www.apache.org/licenses/)
PDF.js
Apache License Version 2.0 (http://www.apache.org/licenses/)
Font Awesome
SIL OFL 1.1 (http://scripts.sil.org/OFL)
MIT License (http://opensource.org/licenses/mit-license.html)
CC BY 3.0 ( http://creativecommons.org/licenses/by/3.0/)
Powered by Worktribe © 2025
Advanced Search