Skip to main content

Research Repository

Advanced Search

An empirical investigation into the influence of sealing crimp geometry and process settings on the seal integrity of traditional and biopolymer packaging materials

Matthews, Jason; Hicks, Ben; Mullineux, Glen; Leslie, John; Burke, Andy; Goodwin, Jim; Ogg, Andrew; Campbell, Alan

Authors

Ben Hicks

Glen Mullineux

John Leslie

Andy Burke

Jim Goodwin

Andrew Ogg

Alan Campbell



Abstract

This article presents the results of investigations to determine how process settings and crimp geometry affect the seal strength and integrity of traditional polyolefin and biopolymer flexible packaging materials. The results show agreement with previous studies where temperature and dwell time are found to be the dominant factors for both polyolefin and biopolymer films. Pressure and crimp geometry are shown to be secondary factors in the process, up to the point of squeezing the film into molecular contact. In general, it is shown that biopolymers exhibit similar sealing characteristics to more traditional films. Regarding the sealing crimp geometry, it is shown that the crimp pitch has little or no effect on sealing integrity for films with gauges between 25 and 40 μm. However, for the same gauge material, crimp angles more than 80° offer the greatest potential to gain higher seal strengths. It is further shown that with the cellulose and polylactic acid films tested, a higher seal strength can be produced with crimp pitches of 2 mm and lower. Also presented are some more general implications for guiding the selection of sealing crimp geometry and their usage with biopolymers. Copyright © 2012 John Wiley & Sons, Ltd.

Journal Article Type Article
Publication Date Oct 1, 2013
Journal Packaging Technology and Science
Print ISSN 0894-3214
Electronic ISSN 1099-1522
Publisher Wiley
Peer Reviewed Peer Reviewed
Volume 26
Issue 6
Pages 355-371
DOI https://doi.org/10.1002/pts.1991
Keywords biopolymer, packaging, seal integrity
Public URL https://uwe-repository.worktribe.com/output/927302
Publisher URL http://dx.doi.org/10.1002/pts.1991