3D finite element model for predicting manufacturing distortions of composite parts

�inar, Kenan; �?nar, Kenan; Ersoy, Nuri

Abstract

© SAGE Publications. A 3D finite element model has been developed for predicting manufacturing distortions of fibre-reinforced thermosetting composite parts. The total curing process is divided into three steps that correspond to the states that resin passes through during curing: viscous, rubbery, and glassy. Tool-part interaction properties were calibrated by modelling the distortion of a single ply part. For comparison, composite parts of various geometries (L-section and U-section), stacking sequences, thicknesses, and bagging conditions were manufactured. The full field thickness profile and full field distortion pattern were obtained using a 3D laser scanner, which reveals higher and lower resin bleeding and corner thickening locations. The effect of stacking sequence is also examined with the full field distortion pattern. It was found that the parts manufactured under the bleeding condition give higher spring-in and warpage values. The spring-in predictions were well matched to measurements of the manufactured parts.

• Journal Article Type: Article
• Acceptance Date: Jan 1, 2016
• Online Publication Date: Jan 27, 2016
• Publication Date: Nov 1, 2016
• Deposit Date: Jul 19, 2018
• Publicly Available Date: Jan 28, 2019
• Journal: Journal of Composite Materials
• Print ISSN: 0021-9983
• Electronic ISSN: 1530-793X
• Publisher: SAGE Publications
• Peer Reviewed: Peer Reviewed
• Volume: 50
• Issue: 27
• Pages: 3791-3807
• DOI: https://doi.org/10.1177/0021998315625789
• Keywords: thermosetting resins, residual/internal stress, finite element analysis, autoclave
• Public URL: https://uwe-repository.worktribe.com/output/906582
• Publisher URL: http://dx.doi.org/10.1177/0021998315625789
• Additional Information: Additional Information : Copyright(c)2016 Reprinted by permission of SAGE publications.
• Contract Date: Jul 19, 2018