Staking is a cold metal joining process widely used in the manufacture of self-lubricating spherical plain aerospace bearings. These are used to form components such as tie-rod links or threaded rod ends as often seen on control surfaces for rotary w... Read More about Characterising the amplitude and mechanisms responsible for the pushout load and torque for a staked self-lubricating spherical plain bearing.
Outputs (12)
Enhanced suppression of vibration response and energy transfer by using nonlinear hysteresis friction damper (2024)
Journal Article
This paper presents coupled structures based on a nonlinear hysteresis friction damper subjected to harmonic forces for vibration suppression. The steady-state responses of the structures are obtained by the Runge–Kutta method and the harmonic balanc... Read More about Enhanced suppression of vibration response and energy transfer by using nonlinear hysteresis friction damper.
An experimental investigation of the impact response and post-impact shear buckling behaviour of hybrid composite laminates (2023)
Journal Article
This paper investigates the effect of transverse impact loading on the in-plane shear behaviour of two laminate configurations. The extensive experimental studies consider a pure carbon laminate (type 1) and a novel X-shaped carbon/glass laminate (ty... Read More about An experimental investigation of the impact response and post-impact shear buckling behaviour of hybrid composite laminates.
This study performs an investigation of dynamic stall control (Gurney flap (GF)) and flow augmentation (straight upstream deflector (SUD)) devices to improve the performance of lift-driven Vertical Axis Wind Turbine (VAWT) as they can improve the pow... Read More about Investigation of flow augmentation and dynamic stall control devices as performance enhancement of lift-driven vertical axis wind turbine using high-fidelity CFD methods.
Recycling face masks for manufacturing FlaxPP eco-composites (2022)
Presentation / Conference Contribution
SDGs addressed: 9, 11, 12, 14 and 15.
Introduction:
The severe increase in the pollution caused by the discarded face masks during COVID-19 cannot be overstated. This research provides an innovative engineering solution to this issue by recycling p... Read More about Recycling face masks for manufacturing FlaxPP eco-composites.
Aerodynamic and aeroacoustic analysis of a harmonically morphing airfoil using dynamic meshing (2021)
Journal Article
This work explores the aerodynamic and aeroacoustic responses of an airfoil fitted with a harmonically morphing Trailing Edge Flap (TEF). An unsteady parametrization method adapted for harmonic morphing is introduced, and then coupled with dynamic me... Read More about Aerodynamic and aeroacoustic analysis of a harmonically morphing airfoil using dynamic meshing.
Using laminate hybridisation (CFRP-GFRP) and shaped CFRP plies to increase plate post-buckling strain to failure under shear loading (2021)
Journal Article
Previous works have established the response and failure behaviour of hybrid (CFRP-GFRP) laminates when subjected to a wide range of destabilising loads. However, to date no works have quantified the influence of selective laminate shapes and hybridi... Read More about Using laminate hybridisation (CFRP-GFRP) and shaped CFRP plies to increase plate post-buckling strain to failure under shear loading.
Detection of aircraft touchdown using longitudinal acceleration and continuous wavelet transformation (2020)
Journal Article
The paper presents a methodology enabling the detection of aircraft touchdowns based on data obtained from accelerometers attached to the structural parts of the airframe in the cockpit or passenger compartment. Precise determination of the moment an... Read More about Detection of aircraft touchdown using longitudinal acceleration and continuous wavelet transformation.
Dynamic mesh framework for morphing wings CFD (2019)
Thesis
In this work, a framework to perform high fidelity Computational Fluid Dynamics (CFD) analysis of dynamically morphing airfoils and wings is presented. An unsteady parametric method to model the deforming motion is proposed and then implemented in a... Read More about Dynamic mesh framework for morphing wings CFD.
Marimo machines: Oscillators, biosensors and actuators (2019)
Journal Article
Background
The green algae balls (Aegagropila linnaei), known as Marimo, are large spherical colonies of live photosynthetic filaments, formed by rolling water currents in freshwater lakes. Photosynthesis therein produces gas bubbles that can attach... Read More about Marimo machines: Oscillators, biosensors and actuators.
Dr Alex Moulton CBE RDI 1920-2012 (2015)
Presentation / Conference Contribution
Chaired by Professor Sir Christopher Frayling this half day seminar included presentations from
Sebastian Conran, Tony Hadland, Dominic Stone, Dan Farrell and Peter Barker on the bicycle,
automotive and other works of this seminal figure of 20th ce... Read More about Dr Alex Moulton CBE RDI 1920-2012.
Time-dependent thermo-creep analysis of rotating FGM thick-walled cylindrical pressure vessels under heat flux (2014)
Journal Article
In the present study, time-dependent thermoelastic creep response for isotropic rotating thick-walled cylindrical pressure vessels made of functionally graded material (FGM) has been investigated, taking into account the creep behavior of the FGM pre... Read More about Time-dependent thermo-creep analysis of rotating FGM thick-walled cylindrical pressure vessels under heat flux.