Outputs (67)

Size-dependent nonlinear secondary resonance of micro-/nano-beams made of nano-porous biomaterials including truncated cube cells (2018)
Journal Article

© 2018, Springer-Verlag GmbH Austria, part of Springer Nature. Porous biomaterials have been utilized in cellular structures in order to mimic the function of bone as a branch of tissue engineering approach. With the aid of nano-porous biomaterials i... Read More about Size-dependent nonlinear secondary resonance of micro-/nano-beams made of nano-porous biomaterials including truncated cube cells.

Development of improved models for estimation of bursting stresses in elements under high-concentrated load (2018)
Journal Article

© 2019, Brazilian Association of Computational Mechanics. All rights reserved. In precast concrete segmental tunnels, radial and circumferential joints are often the most highly stressed parts and it is therefore important to use appropriate equation... Read More about Development of improved models for estimation of bursting stresses in elements under high-concentrated load.

Airborne artificial intelligence in the wild (2018)
Presentation / Conference Contribution

MAVs, UAVs, Drones, Quads, call them what you will. A set of technologies has converged to cause a breakthrough in capability and cost, which has created a new industry and colossal interest from many parties who see both opportunities and threats.... Read More about Airborne artificial intelligence in the wild.

Structural performance of a modified shear-head assembly for edge steel column embedded in reinforced concrete slab (2018)
Journal Article

© 2018 by the authors; licensee Growing Science, Canada. This paper presents a study on the structural performance of a modified shear-head assembly for edge steel column embedded in reinforced concrete slab. The structural performance was investigat... Read More about Structural performance of a modified shear-head assembly for edge steel column embedded in reinforced concrete slab.

Manufacturability of AlSi10Mg overhang structures fabricated by laser powder bed fusion (2018)
Journal Article

© 2018 Elsevier Ltd The main advantage of laser powder bed fusion (LPBF) is its use for directly manufacturing metal components with highly complex geometries. But the LPBF manufacture of overhang structures, also known as downward-facing surfaces, i... Read More about Manufacturability of AlSi10Mg overhang structures fabricated by laser powder bed fusion.

Assessment of the oil scoop capture efficiency in high speed rotors (2018)
Journal Article

© 2019 by ASME. Experimental research was conducted into a scooped rotor system that captures oil from a stationary jet and directs it through passages within the shaft to another axial location. Such a system has benefits for delivering oil via unde... Read More about Assessment of the oil scoop capture efficiency in high speed rotors.

Selecting nozzle arrangement of a chimney tower to reduce the temperature and to increase the entrainment mass flow (2018)
Journal Article

© TJPRC Pvt. Ltd. The aim of this research work was to find the best arrangement of nozzles inside the chimney tower to reduce the temperature and to increase the entrainment mass flow. An existing design of the nozzle arrangement was used as the ref... Read More about Selecting nozzle arrangement of a chimney tower to reduce the temperature and to increase the entrainment mass flow.

A review of current technical development in vertical axis wind turbine technologies and their braking system for low speed, urban and offshore areas application (2018)
Presentation / Conference Contribution

Recently, there are growing interests of using Vertical Axis Wind Turbine (VAWT) to harvest wind energy from low wind speed in urban areas to relatively high wind speed in offshore wind farms. Horizontal Axis Wind Turbine (HAWT) has been known to hav... Read More about A review of current technical development in vertical axis wind turbine technologies and their braking system for low speed, urban and offshore areas application.

CFD simulation of three-straight-bladed vertical axis wind turbine at low tip speed ratios (2018)
Presentation / Conference Contribution

This paper presents computational fluid dynamics (CFD) simulations of a three-straight-bladed Vertical Axis Wind Turbine (VAWT) operating at a wind speed of 9 m/s and low Tip Speed Ratio (TSR) ranging from 1.44 to 3.3. The turbine blade has NACA 0021... Read More about CFD simulation of three-straight-bladed vertical axis wind turbine at low tip speed ratios.

Adaptive finite-time stabilization of chaotic flow with a single unstable node using a nonlinear function-based global sliding mode (2018)
Journal Article

© 2018, Shiraz University. This article presents a novel adaptive finite-time stabilization technique based on global sliding mode for disturbed chaotic flow with a single unstable node. The considered chaotic flow has unusual characteristics contain... Read More about Adaptive finite-time stabilization of chaotic flow with a single unstable node using a nonlinear function-based global sliding mode.

Multi-instrument multi-scale experimental damage mechanics for fibre reinforced composites (2018)
Presentation / Conference Contribution

© Published under licence by IOP Publishing Ltd. Reliable investigation of damage in fibre reinforced composites requires concurrent in- and ex-situ application of multiple instruments at different scale: digital image correlation, acoustic emission... Read More about Multi-instrument multi-scale experimental damage mechanics for fibre reinforced composites.

Zeolite supported platinum nanoparticles for small organic molecule oxidation and reduction in fuel cell using impregnation (2018)
Presentation / Conference Contribution

Feasibility of Virtual Environments to Develop Future Driving Cycles (2018)
Presentation / Conference Contribution

© 2018 SAE International. All Rights Reserved. The current procedure for testing emissions from new vehicles, the World Harmonised Light Vehicle Test Procedure (WLTP), was introduced in September 2017. The WLTP was developed by collecting over 765,00... Read More about Feasibility of Virtual Environments to Develop Future Driving Cycles.

Compact tension test behaviour of Pseudo-ductile thin-ply carbon/ glass hybrids (2018)
Presentation / Conference Contribution

The aim of this work was to investigate the notched behaviour of thin ply pseudo-ductile carbon/glass hybrid laminates with in-plane Over-height Compact Tension (OCT) specimens. Therefore, a series of tests were performed on two different thin-ply ca... Read More about Compact tension test behaviour of Pseudo-ductile thin-ply carbon/ glass hybrids.

Bearing and bearing-bypass of pseudo-ductile thin-ply carbon/ glass hybrids (2018)
Presentation / Conference Contribution

The aim of this work was to investigate the bearing and bearing-bypass behaviour of thin ply pseudo-ductile carbon/glass hybrid laminates in tension. Therefore, a series of tests were performed based on ASTM D7248/D7248M–12 on a Quasi Isotropic (QI)... Read More about Bearing and bearing-bypass of pseudo-ductile thin-ply carbon/ glass hybrids.

Bias compensation recursive algorithm for dual-rate rational models (2018)
Journal Article

© The Institution of Engineering and Technology 2018. In dual-rate rational systems, some output data are missing (unmeasurable) to make the traditional recursive least squares (RLS) parameter estimation algorithms invalid. In order to overcome this... Read More about Bias compensation recursive algorithm for dual-rate rational models.

Biomechanical properties and microstructure of neonatal porcine ventricles (2018)
Journal Article

© 2018 Elsevier Ltd Neonatal heart disorders represent a major clinical challenge, with congenital heart disease alone affecting 36,000 new-borns annually within the European Union. Surgical intervention to restore normal function includes the implan... Read More about Biomechanical properties and microstructure of neonatal porcine ventricles.

The influence of valve-pump weight ratios on the dynamic response of leaking valve-pump parallel control hydraulic systems (2018)
Journal Article

© 2018 by the authors. A new leaking valve-pump parallel control (LVPC) oil hydraulic system is proposed to improve the performance of dynamic response of present variable speed pump control (VSPC) system, which is an oil hydraulic control system wit... Read More about The influence of valve-pump weight ratios on the dynamic response of leaking valve-pump parallel control hydraulic systems.

Region-Specific Microstructure in the Neonatal Ventricles of a Porcine Model (2018)
Journal Article

© 2018, Biomedical Engineering Society. The neonate transitions from placenta-derived oxygen, to supply from the pulmonary system, moments after birth. This requires a series of structural developments to divert more blood through the right heart and... Read More about Region-Specific Microstructure in the Neonatal Ventricles of a Porcine Model.

Further development of a variable camber morphing mechanism using the direct control airfoil geometry concept (2018)
Presentation / Conference Contribution

This paper reports on the design, manufacture and testing of an improved variable camber morphing wing mechanism following the study by Evans et al. (2016), who employed the so-called Direct Control Airfoil Geometry (DCAG) concept to actuate the trai... Read More about Further development of a variable camber morphing mechanism using the direct control airfoil geometry concept.