Harmonising entrepreneurship education and training in Africa – HEET-Africa framework
(2018)
Presentation / Conference Contribution
All Outputs (501)
Blending context-aware challenges into learning environments (2018)
Presentation / Conference Contribution
There is a growing expectation for educational environments to be more flexible and more engaging, not only for students, but also for teachers. Project-based Learning and cooperative learning have emerged as opportunities to create motivating learni... Read More about Blending context-aware challenges into learning environments.
A review of current technical development in vertical axis wind turbine technologies and their braking system for low speed, urban and offshore areas application (2018)
Presentation / Conference Contribution
Recently, there are growing interests of using Vertical Axis Wind Turbine (VAWT) to harvest wind energy from low wind speed in urban areas to relatively high wind speed in offshore wind farms. Horizontal Axis Wind Turbine (HAWT) has been known to hav... Read More about A review of current technical development in vertical axis wind turbine technologies and their braking system for low speed, urban and offshore areas application.
Beer? Over here! Examining attentional bias towards alcohol in a visual search eye-tracking task (2018)
Presentation / Conference Contribution
A wealth of research indicates that heavy social drinkers demonstrate attentional bias towards alcohol-related stimuli. Many studies, however, employ experimental tasks that expose drinkers to single-stimulus targets (e.g., anti-saccade task), which... Read More about Beer? Over here! Examining attentional bias towards alcohol in a visual search eye-tracking task.
Open innovation: The challenge of integrating knowledge in bi-national projects (2018)
Presentation / Conference Contribution
Purpose – This paper seeks to evaluate the professional culture factors that are present in knowledge integration mechanisms in two selected open innovation cases. Design/methodology/approach – In-depth case studies were conducted in two different e... Read More about Open innovation: The challenge of integrating knowledge in bi-national projects.
CFD simulation of three-straight-bladed vertical axis wind turbine at low tip speed ratios (2018)
Presentation / Conference Contribution
This paper presents computational fluid dynamics (CFD) simulations of a three-straight-bladed Vertical Axis Wind Turbine (VAWT) operating at a wind speed of 9 m/s and low Tip Speed Ratio (TSR) ranging from 1.44 to 3.3. The turbine blade has NACA 0021... Read More about CFD simulation of three-straight-bladed vertical axis wind turbine at low tip speed ratios.
Three-dimensional solid structures simulation on isogeometric b-rep analysis (2018)
Presentation / Conference Contribution
Isogeometric analysis (IGA) was devised to circumvent meshing step in the design process because it uses same basis functions as CAD packages: non-uniform rational B-splines (NURBS). That NURBS information is exchangeable via Initial Graphics Exchang... Read More about Three-dimensional solid structures simulation on isogeometric b-rep analysis.
Environmental adaptation of buildings through morphological differentiation: A biomimetic approach (2018)
Presentation / Conference Contribution
Morphology and form are most common traits to be transferred from natural systems into architecture. However, such traits seldom retain any function of the imitated systems from nature, and therefore hardly represent a successful biomimetic design. T... Read More about Environmental adaptation of buildings through morphological differentiation: A biomimetic approach.
Healthy architecture: A conceptual framework for the integration of public health into the architectural profession (2018)
Presentation / Conference Contribution
The WHO Healthy City strategy places focus on the role the built environment plays as a determinant of health. There is a well-established need for intersectoral work, collaboration and research in order to improve the health of urban populations. Al... Read More about Healthy architecture: A conceptual framework for the integration of public health into the architectural profession.
Small ceramic microbial fuel cell as a trigenerative system for electricity, organics degradation and urine filtration (2018)
Presentation / Conference Contribution
Bioelectrochemical systems are employing microbes as biocatalysts to convert waste into valuable resources. For example, a Microbial Fuel Cell (MFC) utilises chemical energy locked in human urine into direct electrical current and can be scaled-up to... Read More about Small ceramic microbial fuel cell as a trigenerative system for electricity, organics degradation and urine filtration.
Crafts in the Digital Age (2018)
Presentation / Conference Contribution
Professor Stephen Hoskins was an invited speaker on Crafts in the Digital Age at HomoFaber Conference presented by the Michelangelo Foundation, Venice in collaboration with Institut National des Métiers d'Art INMA, 29th September 2018. The Crafts... Read More about Crafts in the Digital Age.
Red moon diaries conference presentation (2018)
Presentation / Conference Contribution
A screening of the Red Moon Diaries Film and a presentation about the research and methodology of the film including the Red Moon exhibition and event.
Green economy and living well: Which best delivers just transition and green jobs? (2018)
Presentation / Conference Contribution
Presentation regarding the most impactful path to a just transition.
The governance of project-based production networks: Empirical analysis from the Indonesian shipbuilding industry (2018)
Presentation / Conference Contribution
Complexity occurs when these resources are not provided by the yard, instead it often relies on the external network. This paper is based on the shipbuilding companies for various reasons: (1) the majority of the shipyards in Indonesia are small and... Read More about The governance of project-based production networks: Empirical analysis from the Indonesian shipbuilding industry.
Performance comparison of MIMO CAP receivers in visible light communication (2018)
Presentation / Conference Contribution
Multiple-input, multiple-output (MIMO) techniques have recently been proposed to improve the spectral efficiency of the conventional carrierless amplitude and phase (CAP) modulation scheme while maintaining its implementation simplicity in visible li... Read More about Performance comparison of MIMO CAP receivers in visible light communication.
Residual Tensile Strength of Adhesively Bonded Double Lap Joints after Transverse Impact (2018)
Presentation / Conference Contribution
Pseudo-ductile Composites with Micro-wrapped Hybrid Tow (2018)
Presentation / Conference Contribution
ABSTRACT A novel dry fibre architecture has been developed in order to improve the ductility of high-performance composites. Micro-wrapping of high-modulus fibres with high strain (to failure fibres) resulted in a unique structure that is capable... Read More about Pseudo-ductile Composites with Micro-wrapped Hybrid Tow.
Pseudo-ductility of unidirectional thin ply hybrid composites in longitudinal compression (2018)
Presentation / Conference Contribution
The compression response of unidirectional thin-ply carbon (C) standard thickness S-glass (SG) hybrid composites is presented. Gradual failure up to high strain has been demonstrated for [SG1/(C1/SG1)17] and [SG1/(C2/SG1)17] hybrid configurations. T... Read More about Pseudo-ductility of unidirectional thin ply hybrid composites in longitudinal compression.
Quantifying the delamination of L-shaped composite laminates under low velocity impact using x-ray computed tomography (2018)
Presentation / Conference Contribution
Low velocity impact response and failure behavior of L-shaped composite laminates were investigated. The composite laminates with variable thickness, stacking sequences, and corner radius were manufactured using autoclave manufacturing method. Tests... Read More about Quantifying the delamination of L-shaped composite laminates under low velocity impact using x-ray computed tomography.
HOUSE project: Building understanding through an enabled boundary object (2018)
Presentation / Conference Contribution