The confluence of Industry 4.0 and construction occupational safety, health and well-being (2023)
Book Chapter
Manu, P., Gao, S., Da Silva Bartolo, P. J., Francis, V., & Sawhney, A. (2023). The confluence of Industry 4.0 and construction occupational safety, health and well-being. In P. Manu, S. Gao, P. J. D. S. Bartolo, V. Francis, & A. Sawhney (Eds.), Handbook of Construction Safety, Health and Well-being in the Industry 4.0 Era (1-14). London: Taylor & Francis (Routledge). https://doi.org/10.1201/9781003213796-1

Globally, the construction sector accounts for more than100,000 occupational fatalities annually. There is an urgent need to improve the poor occupational safety, health and well-being (OSHW) outlook of the construction sector. The advent of the four... Read More about The confluence of Industry 4.0 and construction occupational safety, health and well-being.

Developing Industry 4.0 applications - A social construction of technology approach (2023)
Book Chapter
Collinge, W. H., Osorio-Sandoval, C. A., Manu, P., & Cheung, C. (2023). Developing Industry 4.0 applications - A social construction of technology approach. In P. Manu, S. Gao, P. Jorge Silva Bartolo, V. Francis, & A. Sawhney (Eds.), Handbook of Construction Safety, Health and Well-being in the Industry 4.0 Era (42-51). London: Taylor & Francis (Routledge). https://doi.org/10.1201/9781003213796-5

The design and development of Industry 4.0 applications requires focused research work and close collaboration with the industry. Such an approach requires a balance between technical work and social interactions with industry partners: a social cons... Read More about Developing Industry 4.0 applications - A social construction of technology approach.

Artificial intelligence for occupational health and safety management in construction (2023)
Book Chapter
Perera, S., Paton-Cole, V., Gao, S., Francis, V., Urhal, P., Manu, P., …Babalola, A. (2023). Artificial intelligence for occupational health and safety management in construction. In P. Manu, S. Gao, P. J. S. Bartolo, V. Francis, & A. Sawhney (Eds.), Handbook of Construction Safety, Health and Well-being in the Industry 4.0 Era (154-168). London: Taylor & Francis (Routledge). https://doi.org/10.1201/9781003213796-15

Reducing occupational safety and health (OSH) incidents has been an area of significant importance to the construction industry. The industry remains one of the most dangerous, with significant occupational fatalities and injuries. Artificial intelli... Read More about Artificial intelligence for occupational health and safety management in construction.

Development of a framework integrating agent-based modelling, building information modelling and immersive technologies for construction training and education (2023)
Conference Proceeding
Babalola, A., Cheung, C., Manu, P., & Yunusa-Kaltungo, A. (2023). Development of a framework integrating agent-based modelling, building information modelling and immersive technologies for construction training and education. In CIBW099W123: Digital Transformation of Health and Safety in Construction: Book of Proceedings (471-480). https://doi.org/10.24840/978-972-752-309-2

Effective construction management plays a crucial role in ensuring the successful execution and completion of construction projects. However, the construction industry continues to face numerous challenges, such as time delays and cost overruns, whic... Read More about Development of a framework integrating agent-based modelling, building information modelling and immersive technologies for construction training and education.

Automated progress measurement using computer vision technology in UK construction (2023)
Journal Article
Bozorgzadeh, A., & Umar, T. (2023). Automated progress measurement using computer vision technology in UK construction. Proceedings of the ICE - Smart Infrastructure and Construction, 176(4), 165-182. https://doi.org/10.1680/jsmic.22.00026

A critical concern with the UK's construction project progress monitoring and control techniques is their dependency on data collection, which is time consuming and unproductive and may lead to various circumstances in managing projects. However, col... Read More about Automated progress measurement using computer vision technology in UK construction.

Applications of immersive technologies for occupational safety and health training and education: A systematic review (2023)
Journal Article
Babalola, A., Manu, P., Cheung, C., Yunusa-Kaltungo, A., & Bartolo, P. (2023). Applications of immersive technologies for occupational safety and health training and education: A systematic review. Safety Science, 166, Article 106214

Immersive technologies (ImTs) have emerged as a viable pathway to address poor occupational safety and health (OSH) performance through training and education of workers. This study aimed to gain a holistic view of the applications of ImTs for OSH tr... Read More about Applications of immersive technologies for occupational safety and health training and education: A systematic review.

Handbook of Construction Safety, Health and Well-being in the Industry 4.0 Era (2023)
Book
Manu, P., Gao, S., Bartolo, P. J. S., Francis, V., & Sawhney, A. (Eds.). (2023). Handbook of Construction Safety, Health and Well-being in the Industry 4.0 Era. London: Taylor & Francis (Routledge). https://doi.org/10.1201/9781003213796

This Handbook seeks to examine and advance current understanding of the confluence of construction health, safety and well-being and the broad range of Industry 4.0 technologies in use in the architecture, engineering and construction (AEC) industry.... Read More about Handbook of Construction Safety, Health and Well-being in the Industry 4.0 Era.

A systematic review of Internet of Things applications in construction occupational safety and health management (2023)
Book Chapter
Babalola, A., Urhal, P., Manu, P., Da Silva Bartolo, P. J., Cheung, C., Yunusa-Kaltungo, A., …Paton-Cole, V. (2023). A systematic review of Internet of Things applications in construction occupational safety and health management. In P. Manu, S. Gao, P. J. S. Bartolo, V. Francis, & A. Sawhney (Eds.), Handbook of Construction Safety, Health and Well-being in the Industry 4.0 Era (283-295). London: Taylor & Francis (Routledge). https://doi.org/10.1201/9781003213796-26

The construction industry has a poor reputation for being a high-risk industry due to its poor record of occupational injuries, illnesses, and deaths globally. In recent times, the Internet of Things (IoT) as part of a suite of Industry 4.0 technolog... Read More about A systematic review of Internet of Things applications in construction occupational safety and health management.

Towards designing for the postdigital hybrid workplace: A systematic literature review (2023)
Journal Article
Tahsiri, M. (2023). Towards designing for the postdigital hybrid workplace: A systematic literature review. ENQ, 20(1), 1-19. https://doi.org/10.17831/enqarcc.v20i1.1140

This paper frames the future workplace as a postdigital hybrid space of practice that foregrounds humanistic values and holistically accommodates various requirements of individuals and collectives who make up the socio-cultural context of the workpl... Read More about Towards designing for the postdigital hybrid workplace: A systematic literature review.

AIRBODS: Findings and guidance for airborne infection resilience (2023)
Other
Cook, M., Adamu, Z., Ciric, L., Hathway, A., Malki-Epshtein, L., Fitzgerald, S., …Canales, M. (2023). AIRBODS: Findings and guidance for airborne infection resilience. [Guide]

This guidance provides insights into airborne infection risks and proposes mitigation measures to improve airborne infection resilience of indoor and semi-outdoor spaces. In some poorly-ventilated and/or highly occupied spaces, the provision of incre... Read More about AIRBODS: Findings and guidance for airborne infection resilience.

Multifunctional concrete with Graphene-based nanomaterials and super absorbent polymer (2023)
Journal Article
Qureshi, T., & Ootim, S. (2023). Multifunctional concrete with Graphene-based nanomaterials and super absorbent polymer. Journal of Materials in Civil Engineering, 35(4), https://doi.org/10.1061/%28ASCE%29MT.1943-5533.0004699

This study reports on the development of a multifunctional concrete using graphene nanoplatelet (GnP) and sodium polyacrylate (SP) superabsorbent polymer. A combination of concrete functionalities was convened to improve, i.e., high strength and dura... Read More about Multifunctional concrete with Graphene-based nanomaterials and super absorbent polymer.

A prototype low-carbon segmented concrete shell building floor system (2023)
Journal Article
Oval, R., Nuh, M., Costa, E., Madyan, O. A., Orr, J., & Shepherd, P. (2023). A prototype low-carbon segmented concrete shell building floor system. Structures, 49, 124-138. https://doi.org/10.1016/j.istruc.2023.01.063

Concrete shell structures offer a mechanically efficient solution as a building floor system to reduce the environmental impact of our buildings. Although the curved geometry of shells can be an obstacle to their fabrication and implementation, digit... Read More about A prototype low-carbon segmented concrete shell building floor system.

A systematic review of the application of immersive technologies for safety and health management in the construction sector (2023)
Journal Article
Babalola, A., Manu, P., Cheung, C., Yunusa-Kaltungo, A., & Bartolo, P. (2023). A systematic review of the application of immersive technologies for safety and health management in the construction sector. Journal of Safety Research, 85, 66-85. https://doi.org/10.1016/j.jsr.2023.01.007

Introduction: The construction industry employs about 7% of global manpower and contributes about 6% to the global economy. However, statistics have depicted that the construction industry contributes significantly to workplace fatalities and injurie... Read More about A systematic review of the application of immersive technologies for safety and health management in the construction sector.

Structural health monitoring of underground metro tunnel by identifying damage using ANN deep learning auto-encoder (2023)
Journal Article
Abbas, N., Umar, T., Salih, R., Akbar, M., Hussain, Z., & Haibei, X. (2023). Structural health monitoring of underground metro tunnel by identifying damage using ANN deep learning auto-encoder. Applied Sciences, 13(3), 1332. https://doi.org/10.3390/app13031332

Due to the complexity of underground environmental conditions and operational incidents, advanced and accurate monitoring of the underground metro shield tunnel structures is crucial for maintenance and the prevention of mishaps. In the past few deca... Read More about Structural health monitoring of underground metro tunnel by identifying damage using ANN deep learning auto-encoder.

Strategic vendor due diligence in real estate transactions (2022)
Journal Article
Wiejak-Roy, G. (2023). Strategic vendor due diligence in real estate transactions. Journal of European Real Estate Research, 16(1), 78-91. https://doi.org/10.1108/JERER-04-2022-0012

Purpose: In light of the ever-growing complexity of real estate transactions, the need for vendors and buyers to better understand the role of vendor due diligence (VDD) is imperative. The purpose of this paper is twofold: firstly, it provides a deta... Read More about Strategic vendor due diligence in real estate transactions.

A systematic review of the extent to which BIM Is integrated into operation and maintenance (2022)
Journal Article
Abideen, D., Yunusa-Kaltungo, A., Manu, P., & Cheung, C. (2022). A systematic review of the extent to which BIM Is integrated into operation and maintenance. Sustainability, 14(14), 1-55. https://doi.org/10.3390/su14148692

Although a considerable amount of research has addressed the use of building information modelling (BIM) in facilities management (FM) within the past years, there is limited systematic review on investigating the potentials of BIM within the operati... Read More about A systematic review of the extent to which BIM Is integrated into operation and maintenance.

BIM-based construction safety risk library (2022)
Journal Article
Collinge, W., Farghaly, K., Hadi Mosleh, M., Manu, P., Cheung, C., & Osorio Sandoval, C. (2022). BIM-based construction safety risk library. Automation in Construction, 141, Article 104391. https://doi.org/10.1016/j.autcon.2022.104391

This paper presents a digital tool and Safety Risk library to assist designers in their health and safety work in BIM digital environments. Addressing an industry need for improved knowledge sharing and collaboration, the BIM Safety Risk library tool... Read More about BIM-based construction safety risk library.

Facilitating ambient intelligence of acoustic atmospheres (2022)
Exhibition / Performance
Barakat, M., Meraz, F., & Nicoletti, E. (2022). Facilitating ambient intelligence of acoustic atmospheres. [RapidPrototyping, Microcontrollers, 3D printing, Digital Fabrication]. Exhibited at RBlock - Frenchay Campus / ABE. 28 April 2022 - 29 April 2022. (Unpublished)

“There is no such thing as an empty space or an empty time. There is always something to see, something to hear. In fact, try as we may to make a silence, we cannot. ” – John Cage, ‘Silence’ The project intends to understand how sounds alter people’... Read More about Facilitating ambient intelligence of acoustic atmospheres.

Sustainable engineering higher education in Oman-lessons learned from the pandemic (COVID-19), improvements, and suggestions in the teaching, learning and administrative framework (2022)
Journal Article
Honnurvali, M. S., El-Saleh, A. A., Sheikh, A. M., Goh, K., Gupta, N., & Umar, T. (2022). Sustainable engineering higher education in Oman-lessons learned from the pandemic (COVID-19), improvements, and suggestions in the teaching, learning and administrative framework. Journal of Engineering Education Transformations, 35(3), 52-69

This research study has investigated the challenges faced due to the pandemic (COVID-19). This paper further provides recommendations that can be adopted by academics, learners, and administrators to make the education system more robust and sustaina... Read More about Sustainable engineering higher education in Oman-lessons learned from the pandemic (COVID-19), improvements, and suggestions in the teaching, learning and administrative framework.

Deep learning-based networks for automated recognition and classification of awkward working postures in construction using wearable insole sensor data (2022)
Journal Article
Antwi-Afari, M. F., Qarout, Y., Herzallah, R., Anwer, S., Umer, W., Zhang, Y., & Manu, P. (2022). Deep learning-based networks for automated recognition and classification of awkward working postures in construction using wearable insole sensor data. Automation in Construction, 136, Article 104181. https://doi.org/10.1016/j.autcon.2022.104181

Among the numerous work-related risk factors, construction workers are often exposed to awkward working postures that may lead them to develop work-related musculoskeletal disorders (WMSDs). To mitigate WMSDs among construction workers, awkward worki... Read More about Deep learning-based networks for automated recognition and classification of awkward working postures in construction using wearable insole sensor data.