Skip to main content

Research Repository

See what's under the surface


Laser Shibori: A digital moulding technique supporting circular textile design in three dimensions (2018)
Journal Article
Morgan, L., Kane, F., Tyrer, J., & Shen, J. (2018). Laser Shibori: A digital moulding technique supporting circular textile design in three dimensions. Journal of Textile Design Research and Practice, 6(1), 5-22. https://doi.org/10.1080/20511787.2018.1493836

This paper considers the potential for digital laser technology to facilitate sustainable innovation in the field of textile design and manufacture, enabling transition towards a circular economy. Using recent design research as a case study, it disc... Read More about Laser Shibori: A digital moulding technique supporting circular textile design in three dimensions.

Glassworks symposium and exhibition (2018)
Presentation / Conference
Jorgensen, T. (2018, November). Glassworks symposium and exhibition. Presented at Glassworks symposium and exhibition

Tavs Jorgensen, Centre for Fine Print Research and the Ken Stradling Collection invites you to the Glassworks research symposium and exhibition on Friday 9th of November 2018. The Glassworks project explores the use of 3D printing in glass investment... Read More about Glassworks symposium and exhibition.

The application of 2.5D and 3D technologies for the conservation and presentation of surface texture in paintings (2018)
Thesis
Aure Calvet, X. The application of 2.5D and 3D technologies for the conservation and presentation of surface texture in paintings. (Thesis). University of the West of England. Retrieved from https://uwe-repository....ribe.com/output/1491140

This thesis investigates the use and potential applications of emerging 2.5D and 3D digital technologies applied to the study, conservation and presentation of the surface texture of paintings concentrating particularly on issues and applications r... Read More about The application of 2.5D and 3D technologies for the conservation and presentation of surface texture in paintings.

Spending time within books (2018)
Book Chapter
Bodman, S. L. (in press). Spending time within books. In V. Hildebrand-Schat (Ed.), Zur hybriden Natur des Buches im Zeitalter des elektronischen PublizierensKunstgeschichtliche Institut, Goethe-Universität

In my work as a researcher in the field of artists’ books, I encounter new books on a daily basis. Artists send information on their publications to go into the Book Arts Newsletter or the biennial Artist’s Book Yearbook, or write about their work fo... Read More about Spending time within books.

Crafts in the Digital Age (2018)
Presentation / Conference
Hoskins, S. (2018, September). Crafts in the Digital Age. Presented at HomoFaber Conference

Professor Stephen Hoskins was an invited speaker on Crafts in the Digital Age at HomoFaber Conference presented by the Michelangelo Foundation, Venice in collaboration with Institut National des Métiers d'Art INMA, 29th September 2018. The Crafts... Read More about Crafts in the Digital Age.

2.5D Printing Bridging the Gap Between 2D and 3D Applications (2018)
Book
Parraman, C., & Ortiz Segovia, M. V. (2018). 2.5D Printing Bridging the Gap Between 2D and 3D Applications. Wiley

.5D Printing: Bridging the Gap Between 2D and 3D Applications examines the relationship between two- and three-dimensional printing and explores the current ideas, methods, and applications. It provides insights about the diversity of our material cu... Read More about 2.5D Printing Bridging the Gap Between 2D and 3D Applications.

Jugstrusion: A 3D printed indeterministic design approach (2018)
Presentation / Conference
Jorgensen, T. (2018, September). Jugstrusion: A 3D printed indeterministic design approach. Paper presented at Impact 10

This paper reports from ongoing research into the use of 3D printing for developing design and production tools, more specifically for creating dies for the clay extrusion process. Through practice based experiments the research seeks to pose wider q... Read More about Jugstrusion: A 3D printed indeterministic design approach.

How to weave a rainbow? Artists’ approaches to the phenomenology of colour and printing with red green and blue (2018)
Presentation / Conference
Parraman, C. (2018, September). How to weave a rainbow? Artists’ approaches to the phenomenology of colour and printing with red green and blue. Paper presented at IMPACT 10 - ENCUENTRO

Artists have been expert at transcribing the world around us through many different materials - from pigments to photons. This presentation presents an evolution of scientific measuring and mapping colour, alongside artists’ responses to spectral col... Read More about How to weave a rainbow? Artists’ approaches to the phenomenology of colour and printing with red green and blue.

From Responsive Design to Sustainable Systems: Digital Laser Processing across the Textile Production Cycle (2018)
Presentation / Conference
Morgan, L., Matthews, J., Shen, J., & Tyrer, J. (2018, July). From Responsive Design to Sustainable Systems: Digital Laser Processing across the Textile Production Cycle. Poster presented at Integrating Design with Sustainable Technology, The 91st Textile Institute World Conference, University of Leeds, Leeds , UK

Addressing environmental concerns in the textile industry has led to a growing field of research into material and process innovation. Digital technologies can facilitate on-demand manufacture and improve textile processes, resulting in waste reducti... Read More about From Responsive Design to Sustainable Systems: Digital Laser Processing across the Textile Production Cycle.

Read To Me (artist's book) (2018)
Physical Artefact
Bodman, S. Read To Me (artist's book)

‘Read to me’ is an experiment made by the artist in collaboration with a psychometric reader, to transmit the emotional content of selected narratives through a series of physical objects. Ten objects were selected to read chapters of novels, or shor... Read More about Read To Me (artist's book).

Laser Peri-Dyeing for Agile Textile Design: Implementing Laser Processing Research within the Textile Industry (2018)
Presentation / Conference
Morgan, L., Matthews, J., Shen, J., & Tyrer, J. (2018, June). Laser Peri-Dyeing for Agile Textile Design: Implementing Laser Processing Research within the Textile Industry. Paper presented at AUTEX 2018 World Textile Conference: Leading Edge technologies and Trends in Textiles, Swissotel The Bosphorus Istanbul, Turkey

A laser dyeing technique named peri-dyeing, has been developed showing potential for efficient and agile textile surface patterning and coloration. After industrial interest in the technique for manufacturing and customization of textile products, th... Read More about Laser Peri-Dyeing for Agile Textile Design: Implementing Laser Processing Research within the Textile Industry.

Development of a morphing wingtip based on compliant structures (2018)
Journal Article
Wang, C., Haddad Khodaparast, H., Friswell, M. I., Shaw, A. D., Xia, Y., & Walters, P. (2018). Development of a morphing wingtip based on compliant structures. Journal of Intelligent Material Systems and Structures, 29(16), 3293-3304. https://doi.org/10.1177/1045389X18783076

© The Author(s) 2018. Compliant structures, such as flexible corrugated panels and honeycomb structures, are promising structural solutions for morphing aircraft. The compliant structure can be tailored to carry aerodynamic loads and achieve the geom... Read More about Development of a morphing wingtip based on compliant structures.

Mapping post-digital practice in the graphic arts (2018)
Journal Article
Laidler, P. (2018). Mapping post-digital practice in the graphic arts. Printmaking Today, 27(106), 15-15

It has been suggested by a range of established commentators that digital technology may have potentially created a ‘mental change’ within the creative process of making images and objects. Although this statement is somewhat broad and our ability to... Read More about Mapping post-digital practice in the graphic arts.

Satisfaction Guaranteed™ (2018)
Journal Article
Laidler, P. (2018). Satisfaction Guaranteed™

A written and illustrated article. Science fiction films have presented us with numerous visions of machines programmed to satisfy our every need. In some instances these needs have been considered in relation to the intimate and physical relations... Read More about Satisfaction Guaranteed™.

The tactile mapping project – partnership with CFPR – the potential of partnership (2018)
Presentation / Conference
Parraman, C. (2018, May). The tactile mapping project – partnership with CFPR – the potential of partnership. Presented at You Are Here

Bristol Legible City is a unique concept to improve people’s understanding and experience of the city through identity, information, transport and public art projects. The first of its kind in the world, legible city projects now extend to over 30 ci... Read More about The tactile mapping project – partnership with CFPR – the potential of partnership.

The art of printing in the digital age (2018)
Presentation / Conference
Parraman, C. (2018, May). The art of printing in the digital age. Presented at Hong Kong Open Printshop Lecture

Technology has had an enormous influence on Artists, and yet time and again, Artists have demonstrated how they use and subvert print technology for their own creative requirements. The impact of new materials, digital printing, disruptive technologi... Read More about The art of printing in the digital age.