Experimental study on the mechanical behaviour of Carbon-fibre z-pin reinforced curved composite laminates under four-point bending
(2022)
Presentation / Conference
Chen, M., Zhang, B., Xu, X., Allegri, G., & Hallett, S. (2022, June). Experimental study on the mechanical behaviour of Carbon-fibre z-pin reinforced curved composite laminates under four-point bending. Paper presented at 20th European Conference on Composite Materials (ECCM20), Lausanne, Switzerland
All Outputs (13)
Numerical investigation of compression-after-lightning strike characteristics of Carbon/epoxy laminates (2022)
Presentation / Conference
Lo, D., Xu, X., & Lee, J. (2022, June). Numerical investigation of compression-after-lightning strike characteristics of Carbon/epoxy laminates. Paper presented at 20th European Conference on Composite Materials (ECCM20), Lausanne, Switzerland
An Experimental Study of Crack Propagation in Stiffened Over height Compact Tension (SOCT) Specimens (2022)
Presentation / Conference
Sun, X., Xu, X., Shimizu, T., & Wisnom, M. (2022, June). An Experimental Study of Crack Propagation in Stiffened Over height Compact Tension (SOCT) Specimens. Paper presented at 20th European Conference on Composite Materials (ECCM20), Lausanne, Switzerland
Predicting tans-laminar fracture using VCCT and in-situ CT scans (2019)
Presentation / Conference
Sun, X., Takeda, S., Wisnom, M., & Xu, X. (2019, September). Predicting tans-laminar fracture using VCCT and in-situ CT scans. Presented at VII Conference on Mechanical Response of Composites, Girona, Spain
The effects of environmental conditions on the strength of double lap joints (2019)
Presentation / Conference
Paul, A., Xu, X., Wisnom, M., & Shimizu, T. (2019, August). The effects of environmental conditions on the strength of double lap joints. Poster presented at 22nd International Conference on Composite Materials, Melbourne, Australia
Residual Tensile Strength of Adhesively Bonded Double Lap Joints after Transverse Impact (2018)
Presentation / Conference
Paul, A., Xu, X., Wisnom, M., & Shimizu, T. (2018, September). Residual Tensile Strength of Adhesively Bonded Double Lap Joints after Transverse Impact. Presented at 33rd American Society for Composites Technical Conference, Seattle, USA
Experimental investigation into TTC enhancement effect on mode II fracture energy using bi-axial tests (2018)
Presentation / Conference
Xu, X., Rev, T., Sun, X., Wisnom, M., & Hallett, S. (2018, June). Experimental investigation into TTC enhancement effect on mode II fracture energy using bi-axial tests. Presented at 18th European Conference on Composite Materials, Athens, Greece
On the relationship between fracture toughness and specimen thickness for quasi-isotropic carbon/epoxy laminates (2016)
Presentation / Conference
Xu, X., Paul, A., & Wisnom, M. (2016, September). On the relationship between fracture toughness and specimen thickness for quasi-isotropic carbon/epoxy laminates. Presented at 31st American Society for Composites Technical Conference and ASTM D30 Meeting, Williamsburg, USA
Predicting debonding and delamination in adhesively bonded T-joints (2016)
Presentation / Conference
Xu, X., Wisnom, M., Hallett, S., Holden, G., & Gordon, B. (2016, June). Predicting debonding and delamination in adhesively bonded T-joints. Presented at 17th European Conference on Composite Materials
Predicting the notched strength of large quasi-isotropic composite laminates based on small specimen tests (2014)
Presentation / Conference
Xu, X., Wisnom, M., & Hallett, S. (2014, June). Predicting the notched strength of large quasi-isotropic composite laminates based on small specimen tests. Presented at 16th European Conference on Composite Materials, Seville, Spain
Numerical modelling of the effect of ply block thickness in Over-height Compact Tension (OCT) tests (2013)
Presentation / Conference
Hallett, S., Xu, X., Li, X., & Wisnom, M. (2013, September). Numerical modelling of the effect of ply block thickness in Over-height Compact Tension (OCT) tests. Presented at IV ECCOMAS Thematic Conference on the Mechanical Response of Composites, Porto, Portugal
Stacking sequence effects in Over-height Compact Tension tests of quasi-isotropic laminates (2013)
Presentation / Conference
Xu, X., Wisnom, M., Hallett, S., Zobeiry, N., Leslie, S., Poursartip, A., & Vaziri, R. (2013, July). Stacking sequence effects in Over-height Compact Tension tests of quasi-isotropic laminates. Presented at 19th International Conference on Composite Materials, Montreal, Canada
An experimental and numerical investigation of the interaction between splits and edge delaminations in [+20m/-20m]ns carbon/epoxy laminates (2012)
Presentation / Conference
Xu, X., & Wisnom, M. (2012, June). An experimental and numerical investigation of the interaction between splits and edge delaminations in [+20m/-20m]ns carbon/epoxy laminates. Presented at 15th European Conference on Composite Materials, Venice, Italy