Skip to main content

Research Repository

Advanced Search

All Outputs (101)

Towards a Platform-Independent Cooperative Human Robot Interaction System: III. An Architecture for Learning and Executing Actions and Shared Plans (2012)
Journal Article
Lallée, S., Pattacini, U., Lemaignan, S., Lenz, A., Melhuish, C., Natale, L., …Dominey, P. F. (2012). Towards a Platform-Independent Cooperative Human Robot Interaction System: III. An Architecture for Learning and Executing Actions and Shared Plans. IEEE Transactions on Autonomous Mental Development, 4(3), 239-253. https://doi.org/10.1109/TAMD.2012.2199754

Robots should be capable of interacting in a cooperative and adaptive manner with their human counterparts in open-ended tasks that can change in real-time. An important aspect of the robot behavior will be the ability to acquire new knowledge of the... Read More about Towards a Platform-Independent Cooperative Human Robot Interaction System: III. An Architecture for Learning and Executing Actions and Shared Plans.

The application of laser sintering for archaeological model-making (2012)
Conference Proceeding
Soe, S., Eyers, D. R., Potter, A. T., Jones, T., & Nayling, N. (2012). The application of laser sintering for archaeological model-making. In P. J. Bartolo (Ed.), Innovative Developments in Virtual and Physical Prototyping. , (757-762)

Distributed autonomous morphogenesis in a self-assembling robotic system (2012)
Book Chapter
Liu, W., & Winfield, A. F. (2012). Distributed autonomous morphogenesis in a self-assembling robotic system. In R. Doursat, H. Sayama, & O. Michel (Eds.), Morphogenetic Engineering: Understanding Complex Systems (89-113). Springer. https://doi.org/10.1007/978-3-642-33902-8_4

We present distributed morphogenesis control strategies in a swarm of robots able to autonomously assemble into 3D symbiotic organisms to perform specific tasks. Each robot in such a system can work autonomously, while teams of robots can self-assemb... Read More about Distributed autonomous morphogenesis in a self-assembling robotic system.

On fault tolerance and scalability of swarm robotic systems (2012)
Journal Article
Bjerknes, J. D., & Winfield, A. F. (2012). On fault tolerance and scalability of swarm robotic systems. https://doi.org/10.1007/978-3-642-32723-0_31

This paper challenges the common assumption that swarm robotic systems are robust and scalable by default. We present an analysis based on both reliability modelling and experimental trials of a case study swarm performing team work, in which failure... Read More about On fault tolerance and scalability of swarm robotic systems.

TACTIP - Tactile fingertip device, challenges in reduction of size to ready for robot hand integration (2012)
Presentation / Conference
Winstone, B., & Griffiths, G. (2012, December). TACTIP - Tactile fingertip device, challenges in reduction of size to ready for robot hand integration. Paper presented at 2012 IEEE International Conference on Robotics and Biomimetics (ROBIO 2012), Guangzhou, China

Previous work on the TACTIP project has demonstrated a prototype tactile fingertip device, at a little over twice the diameter(40mm) of a human fingertip (16-20mm). Unlike most other developed MEMS sensors, the TACTIP device is appropriate for all ta... Read More about TACTIP - Tactile fingertip device, challenges in reduction of size to ready for robot hand integration.

Multi-block high-order dns code development for jet in turbulent cross-flow simulation (2012)
Journal Article
Castagna, J., & Yao, Y. (2012). Multi-block high-order dns code development for jet in turbulent cross-flow simulation. Journal of Algorithms and Computational Technology, 6(4), 593-621. https://doi.org/10.1260/1748-3018.6.4.593

A multi-block high-order finite-difference direct numerical simulation (DNS) code has been developed for studying turbulent flows over complex geometries. A global mapping technique is adopted and applied to a multi-block domain arrangement, in which... Read More about Multi-block high-order dns code development for jet in turbulent cross-flow simulation.

Dynamic deflectometry: A novel approach for the on-line reconstruction of specular freeform surfaces (2012)
Journal Article
Wedowski, R. D., Atkinson, G., Smith, M., & Smith, L. (2012). Dynamic deflectometry: A novel approach for the on-line reconstruction of specular freeform surfaces. Optics and Lasers in Engineering, 50(12), 1765-1778. https://doi.org/10.1016/j.optlaseng.2012.07.003

The dynamic inspection and reverse engineering of specular freeform surfaces is a challenge so far largely unsolved. Products produced in high quantities in industrial environments are still inspected manually which is labour intensive, expensive, mo... Read More about Dynamic deflectometry: A novel approach for the on-line reconstruction of specular freeform surfaces.

Debond resisting composite stringers (2012)
Conference Proceeding
O'Donnell, M. P., Weaver, P. M., & Cosentino, E. (2012). Debond resisting composite stringers. In 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference

Beaming: An asymmetric telepresence system (2012)
Journal Article
Steed, A., Steptoe, W., Oyekoya, W., Pece, F., Weyrich, T., Kautz, J., …Slater, M. (2012). Beaming: An asymmetric telepresence system. IEEE Computer Graphics and Applications, 32(6), 10-17. https://doi.org/10.1109/MCG.2012.110

The Beaming project recreates, virtually, a real environment; using immersive VR, remote participants can visit the virtual model and interact with the people in the real environment. The real environment doesn't need extensive equipment and can be a... Read More about Beaming: An asymmetric telepresence system.

Tensile properties and microstructural characteristics of indirect rheoformed A356 aluminum alloy (2012)
Journal Article
Bolouri, A., Bae, J. W., & Kang, C. G. (2013). Tensile properties and microstructural characteristics of indirect rheoformed A356 aluminum alloy. Materials Science and Engineering: A, 562, 1-8. https://doi.org/10.1016/j.msea.2012.10.099

The effects of rheoforming parameters such as the rheoforming temperature and pressure on the tensile properties of H-shaped components were examined. An H-shaped component is useful for practical investigation into the influence of different wall th... Read More about Tensile properties and microstructural characteristics of indirect rheoformed A356 aluminum alloy.

Self-assembly in heterogeneous modular robots (2012)
Presentation / Conference
Liu, W., & Winfield, A. F. (2012, November). Self-assembly in heterogeneous modular robots. Paper presented at International Symposium on Distributed Autonomous Robotic Systems, Baltimore, Maryland, USA

This paper describes the distributed self-assembly of a multi-robot ‘organism’ from a swarm of autonomous heterogeneous modular mobile robots. A distributed self-assembly strategy based on a symbol sequence representation is proposed. Constructed fro... Read More about Self-assembly in heterogeneous modular robots.

Numerical study of unsteady airflow phenomena in a ventilated room (2012)
Journal Article
Horikiri, K., Yao, Y., & Yao, J. (2012). Numerical study of unsteady airflow phenomena in a ventilated room. Computational Thermal Sciences, 4(4), 317-333. https://doi.org/10.1615/ComputThermalScien.2012005093

Numerical simulation of airflow in an indoor environment has been carried out for forced, natural, and mixed convection modes, respectively, by using the computational fluid dynamics (CFD) approach of solving the Reynolds-averaged Navier-Stokes equat... Read More about Numerical study of unsteady airflow phenomena in a ventilated room.

Numerical study of unsteady airflow phenomena in a ventilated room (2012)
Conference Proceeding
Horikiri, K., Yao, Y., & Yao, J. (2012). Numerical study of unsteady airflow phenomena in a ventilated room. https://doi.org/10.1615/ICHMT.2012.CHT-12.730

Numerical simulation of airflow in an indoor environment has been carried out for forced, natural and mixed convection modes respectively, by using computational fluid dynamics (CFD) approach of solving the Reynolds-averaged Navier-Stokes equations.... Read More about Numerical study of unsteady airflow phenomena in a ventilated room.

Numerical simulation of a turbulent flow over an axisymmetric hill (2012)
Conference Proceeding
Castagna, J., Yao, Y., & Yao, J. (2012). Numerical simulation of a turbulent flow over an axisymmetric hill. https://doi.org/10.2514/6.2012-98

Simulation of a turbulent °ow over an axisymmetric hill has been carried out to study three-dimensional °ow separation and reattachment that occur on the lee-side of the geome-try. A total of four simulations are considered at low Reynolds number of... Read More about Numerical simulation of a turbulent flow over an axisymmetric hill.

Single end feeder arcing fault location using mutual inductance (2012)
Journal Article
Alamuti, M. M., & Nouri, H. (2012). Single end feeder arcing fault location using mutual inductance. European Transactions on Electrical Power, 22(8), 1136-1145. https://doi.org/10.1002/etep.633

Impedance-based fault location methods to date are able to locate only permanent and linear faults. Current fault location methods assume that arc resistance is constant to locate the fault. However, because of the variable nature of the arc resistan... Read More about Single end feeder arcing fault location using mutual inductance.

Laser sintering for the fabrication of architectural models (2012)
Journal Article
Yusmawiza, W. A., Eyers, D. R., & Soe, S. (2012). Laser sintering for the fabrication of architectural models. Advanced Materials Research, 576, 637-640. https://doi.org/10.4028/www.scientific.net/AMR.576.637

Additive Manufacturing technologies are widely employed in the production of models for a range of industries. However, to-date little explicit research attention has examined the way in which the Laser Sintering technologies can be used in the speci... Read More about Laser sintering for the fabrication of architectural models.

Two people walk into a bar: Dynamic multi-party social interaction with a robot agent (2012)
Presentation / Conference
Foster, M. E., Gaschler, A., Giuliani, M., Isard, A., Pateraki, M., & Petrick, R. P. A. (2012, October). Two people walk into a bar: Dynamic multi-party social interaction with a robot agent. Paper presented at 14th ACM International Conference on Multimodal Interaction (ICMI 2012), California, USA

We introduce a humanoid robot bartender that is capable of dealing with multiple customers in a dynamic, multi-party social setting. The robot system incorporates state-of-the-art components for computer vision, linguistic processing, state managemen... Read More about Two people walk into a bar: Dynamic multi-party social interaction with a robot agent.

Towards a variable compliance hydrostatic skeleton inspired gripper (2012)
Journal Article
Zheng, Y., Giannaccini, M. E., Dogramadzi, S., & Pipe, A. G. (2012). Towards a variable compliance hydrostatic skeleton inspired gripper. Proceedings of the ... IEEE/RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics. IEEE/RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics, 246-251. https://doi.org/10.1109/BioRob.2012.6290885

Variable compliance is a subject of great interest in the robotics community, particularly in the area of HumanRobot interaction. In this work, variable compliance is achieved in a novel grasping device inspired by the hydrostatic skeletons of invert... Read More about Towards a variable compliance hydrostatic skeleton inspired gripper.

CFD prediction and experimental measurement of blade water coverage in a diesel turbocharger (2012)
Journal Article
Yao, J., & Yao, Y. (2012). CFD prediction and experimental measurement of blade water coverage in a diesel turbocharger. Modelling and Simulation in Engineering, 2012, 1-11. https://doi.org/10.1155/2012/789563

A turbocharger unit for diesel engine is often equipped with a built-in online water washing system and its performance is not always satisfactory because of efficiency declination due to deposit accumulated on blade surfaces not being washed away. I... Read More about CFD prediction and experimental measurement of blade water coverage in a diesel turbocharger.

Effect of jet inclination angle and hole exit shape on vortical flow structures in low-reynolds number jet in cross-flow (2012)
Journal Article
Yao, Y., Maidi, M., & Yao, J. (2012). Effect of jet inclination angle and hole exit shape on vortical flow structures in low-reynolds number jet in cross-flow. Modelling and Simulation in Engineering, 2012, 1-7. https://doi.org/10.1155/2012/632040

Numerical studies have been performed to visualize vortical flow structures emerged from jet cross-flow interactions. A single square jet issuing perpendicularly into a cross-flow was simulated first, followed by two additional scenarios, that is, in... Read More about Effect of jet inclination angle and hole exit shape on vortical flow structures in low-reynolds number jet in cross-flow.