Skip to main content

Research Repository

Advanced Search

All Outputs (15)

Compressive behaviour of a square origami surface-based lattice structure fabricated by selective laser melting (2023)
Conference Proceeding
Gao, J., Han, Q., Soe, S., Liu, Z., Feng, J., Zhang, Z., & Wang, L. (2023). Compressive behaviour of a square origami surface-based lattice structure fabricated by selective laser melting. In R. J. Howlett, S. G. Scholz, & R. Setchi (Eds.), SDM 2022: Sustainable Design and Manufacturing (57-66). https://doi.org/10.1007/978-981-19-9205-6_6

Selective laser melting (SLM) is a metal additive manufacturing process that shows significant advantages in manufacturing lattice structures. In this paper, a novel surface-based square origami structure made of a nickel-based superalloy was fabrica... Read More about Compressive behaviour of a square origami surface-based lattice structure fabricated by selective laser melting.

Using FFF and topology optimisation to increase crushing strength in equestrian helmets (2020)
Conference Proceeding
Soe, S., Robinson, M., Gaisin, K., Adams, R., Palkowski, T., & Theobald, P. (2021). Using FFF and topology optimisation to increase crushing strength in equestrian helmets. In S. Scholz, R. Howlett, & R. Setchi (Eds.), Sustainable Design and Manufacturing 2020. , (369-377). https://doi.org/10.1007/978-981-15-8131-1_33

International standards ensure that equestrian helmets achieve high performance. Recently, one such standard (PAS 015) was revised to include a lateral deformation requirement, ensuring helmets can withstand the potential crushing forces associated w... Read More about Using FFF and topology optimisation to increase crushing strength in equestrian helmets.

The effect of heat treatment of AlSi10Mg on the energy absorption performance of surface-based structures (2020)
Conference Proceeding
Robinson, M., Han, Q., Gu, H., Soe, S., & Setchi, R. (2021). The effect of heat treatment of AlSi10Mg on the energy absorption performance of surface-based structures. In S. Scholz, R. Howlett, & R. Setchi (Eds.), Sustainable Design and Manufacturing 2020. , (395-402). https://doi.org/10.1007/978-981-15-8131-1_35

Additive Manufacturing of cellular lattice structures offers opportunities to fine-tune the mechanical response by altering geometric variables. It is known that heat treatment cycles provide an effective way of altering mechanical properties while r... Read More about The effect of heat treatment of AlSi10Mg on the energy absorption performance of surface-based structures.

Developing elastomeric cellular structures for multiple head impacts (2017)
Conference Proceeding
Robinson, M., Soe, S., McShane, G., Celeghini, R., Burek, R., Alves, M., & Theobald, P. (2017). Developing elastomeric cellular structures for multiple head impacts. In 2017 IRCOBI Conference Proceedings

Foam?based materials were originally incorporated into helmets in the 1970?s, providing an effective method of absorbing impact energy and so protecting against severe head injury. Similar materials still exist in the majority of protective helmets t... Read More about Developing elastomeric cellular structures for multiple head impacts.

An integrated eco-design decision making tool (2016)
Conference Proceeding
Romli, A., Prickett, P., Setchi, R., & Soe, S. (2016). An integrated eco-design decision making tool. In Sustainable Design and Manufacturing 2016 (537--548). https://doi.org/10.1007/978-3-319-32098-4

The application of an integrated eco-design decision making tool is presented as a case study considering the design of an office chair base. This study brings together the analysis of factors relating to manufacturing processes, product usage and en... Read More about An integrated eco-design decision making tool.

Eco-case based reasoning (Eco-CBR) for supporting sustainable product design (2015)
Conference Proceeding
Romli, A., Setchi, R., Soe, S., & Prickett, P. (2015). Eco-case based reasoning (Eco-CBR) for supporting sustainable product design. In SDM'2015: 2nd International Conference on Sustainable Design and Manufacturing (145-158)

A major challenge for any manufacturer is including aspects of sustainable development in product design. These are related to the social, environmental and economic impacts of the proposed product. This paper proposes the development of an eco- case... Read More about Eco-case based reasoning (Eco-CBR) for supporting sustainable product design.

Feasibility of using Duraform® flex lattice structures and additive manufacturing for optimising bicycle helmet design safety (2014)
Conference Proceeding
Soe, S., Robinson, M. R., Martin, P. S., Jones, M. D., & Theobald, P. (2014). Feasibility of using Duraform® flex lattice structures and additive manufacturing for optimising bicycle helmet design safety. In Sustainable Design and Manufacturing: SDM-14: Pre-Proceedings. , (278-291)

Bicycle helmets are designed to attenuate forces and accelerations experienced by the head during cycling accidents. An essential element of bicycle helmet design is, therefore, the appropriate manufacturing of energy dissipating components. The focu... Read More about Feasibility of using Duraform® flex lattice structures and additive manufacturing for optimising bicycle helmet design safety.

Sensitivity analysis of an eco-design house of quality model (2014)
Conference Proceeding
Romli, A., Prickett, P. W., Setchi, R., & Soe, S. (2014). Sensitivity analysis of an eco-design house of quality model. In SDM'14: International Conference on Sustainable Design and Manufacturing. , (488-499)

The application of laser sintering for archaeological model-making (2012)
Conference Proceeding
Soe, S., Eyers, D. R., Potter, A. T., Jones, T., & Nayling, N. (2012). The application of laser sintering for archaeological model-making. In P. J. Bartolo (Ed.), Innovative Developments in Virtual and Physical Prototyping. , (757-762)

New demands on rapid prototypes in advanced tooling technologies (1999)
Conference Proceeding
Soe, S. (1999). New demands on rapid prototypes in advanced tooling technologies. In Manufacturing for a Global Market. Proceedings of the Fifteenth Conference of the International Foundation for Production Research. ICPR-15