Skip to main content

Research Repository

Advanced Search

All Outputs (9)

Fatigue behaviour of un-notched and open-hole quasi-isotropic pseudo-ductile thin-ply carbon/glass hybrid laminates (2019)
Presentation / Conference
Fotouhi, M., Suwarta, P., Jenkin, R., Jalalvand, M., & Wisnom, M. (2019, August). Fatigue behaviour of un-notched and open-hole quasi-isotropic pseudo-ductile thin-ply carbon/glass hybrid laminates. Presented at ICCM22, Melbourne, Australia

This paper investigates fatigue behaviour of a QI composite made from thin carbon plies and standard thickness glass plies. As illustrated in Fig. 2, this orientation-dispersed QI thin-ply carbon/glass hybrid laminate showed a successful pseudo-ducti... Read More about Fatigue behaviour of un-notched and open-hole quasi-isotropic pseudo-ductile thin-ply carbon/glass hybrid laminates.

Investigation of the hybrid effect in high performance quasi-isotropic thin-ply carbon/glass composites under tension (2019)
Presentation / Conference
Idarraga, G., Fotouhi, M., Jalalvand, M., J, M., & Wisnom, M. (2019, August). Investigation of the hybrid effect in high performance quasi-isotropic thin-ply carbon/glass composites under tension. Presented at ICCM22, Melbourne, Australia

This work studies the hybrid effect in high performance Quasi-Isotropic (QI) composite plates under tensile loading. The hybrid effect is the enhancement in strain at failure of the carbon fibre layers in the hybrid composite compared with a pure car... Read More about Investigation of the hybrid effect in high performance quasi-isotropic thin-ply carbon/glass composites under tension.

Achieving gradual failure in hybrid composite laminates- progressing from tension to beding (2019)
Presentation / Conference
Jalalvand, M., Idarraga, G., Fotouhi, M., Meza, J., & Wisnom, M. (2019, August). Achieving gradual failure in hybrid composite laminates- progressing from tension to beding. Presented at ICCM22, Melbourne, Australia

Most of the progress to-date about achieving gradual failure have been mainly focused on in-plane loading and particularly tension. In many real structural applications, the load is not pure in-plane and is a mix of in-plane and transverse. One of th... Read More about Achieving gradual failure in hybrid composite laminates- progressing from tension to beding.

Acoustic emission based investigation on the effect of temperature and hybridization on drop weight impact and post-impact residual strength of hemp and basalt fibres reinforced polymer composite laminates (2019)
Journal Article
Suresh Kumar, C., Fotouhi, M., Saeedifar, M., & Arumugam, V. (2019). Acoustic emission based investigation on the effect of temperature and hybridization on drop weight impact and post-impact residual strength of hemp and basalt fibres reinforced polymer composite laminates. Composites Part B: Engineering, 173, Article 106962. https://doi.org/10.1016/j.compositesb.2019.106962

© 2019 Elsevier Ltd This paper investigates the effect of temperature and hybridization on the impact damage evolution and post-impact residual strength of hemp/epoxy, basalt/epoxy and their hybrid laminates, using mechanical and acoustic emission (A... Read More about Acoustic emission based investigation on the effect of temperature and hybridization on drop weight impact and post-impact residual strength of hemp and basalt fibres reinforced polymer composite laminates.

Polyether sulfone interleaved glass/carbon hybrid composite under impact loading (2019)
Presentation / Conference
Fotouhi, S., Clamp, J., Bolouri, A., & Fotouhi, M. (2019, May). Polyether sulfone interleaved glass/carbon hybrid composite under impact loading. Poster presented at Comptest2019, Lulea, Sweden

This work presents an attempt to improve the low velocity impact performance of Carbon/Glass hybrid composites by interleaving with tough polyether sulfone (PES) membranes. The hybrid composite was made of a glass/epoxy block that was sandwiched betw... Read More about Polyether sulfone interleaved glass/carbon hybrid composite under impact loading.

Fatigue behaviour of pseudo-ductile unidirectional thin-ply carbon/epoxy-glass/epoxy hybrid composites (2019)
Journal Article
Suwarta, P., Fotouhi, M., Czél, G., Longana, M., & Wisnom, M. R. (2019). Fatigue behaviour of pseudo-ductile unidirectional thin-ply carbon/epoxy-glass/epoxy hybrid composites. Composite Structures, 224, 110996. https://doi.org/10.1016/j.compstruct.2019.110996

© 2019 The Authors This paper is the first detailed investigation of the fatigue behavior of pseudo-ductile unidirectional (UD)thin-ply interlayer hybrids made of thin-ply carbon/epoxy plies sandwiched between standard thickness glass/epoxy plies und... Read More about Fatigue behaviour of pseudo-ductile unidirectional thin-ply carbon/epoxy-glass/epoxy hybrid composites.

4D printing self-morphing structures (2019)
Journal Article
Bodaghi, M., Noroozi, R., Zolfagharian, A., Fotouhi, M., & Norouzi, S. (2019). 4D printing self-morphing structures. Materials, 12(8), https://doi.org/10.3390/ma12081353

© 2019 by the authors. Themain objective of thispaper is to introduce complex structureswith self-bending/morphing/ rolling features fabricated by 4D printing technology, and replicate their thermo-mechanical behaviors using a simple computational to... Read More about 4D printing self-morphing structures.

The high strain rate tension behaviour of pseudo-ductile high performance thin ply composites (2019)
Journal Article
Fotouhi, M., Fuller, J., Longana, M., Jalalvand, M., & Wisnom, M. R. (2019). The high strain rate tension behaviour of pseudo-ductile high performance thin ply composites. Composite Structures, 215, 365-376. https://doi.org/10.1016/j.compstruct.2019.02.068

In this study the effect of strain rate in tension on two different types of thin-ply pseudo-ductile laminates is reported. These comprised Unidirectional (UD) and quasi-isotropic (QI) hybrids made from low strain thin-ply carbon/epoxy and high strai... Read More about The high strain rate tension behaviour of pseudo-ductile high performance thin ply composites.

Damage characterization of nano-interleaved CFRP under static and fatigue loading (2019)
Journal Article
Fotouhi, M., Fragassa, C., Fotouhi, S., Saghafi, H., & Minak, G. (2019). Damage characterization of nano-interleaved CFRP under static and fatigue loading. Fibers, 7(2), 13. https://doi.org/10.3390/fib7020013

© 2019 by the authors. The use of high strength-to-weight ratio-laminated fiber-reinforced composites is emerging in engineering sectors such as aerospace, marine and automotive to improve productivity. Nevertheless, delamination between the layers i... Read More about Damage characterization of nano-interleaved CFRP under static and fatigue loading.