Skip to main content

Research Repository

Advanced Search

All Outputs (31)

Towards disposable microbial fuel cells: Natural rubber glove membranes (2013)
Conference Proceeding
Winfield, J., Chambers, L., Rossiter, J., & Ieropoulos, I. (2013). Towards disposable microbial fuel cells: Natural rubber glove membranes. In C. Barchiesi, M. Chianella, & V. Cigolotti (Eds.), Proceedings of the 5th European Fuel Cell Piero Lunghi Conference. , (35-36)

Copyright © 2013 Delta Energy and Environment. Natural rubber from laboratory gloves (GNR) was compared to cation exchange membrane (CEM) in microbial fuel cells (MFC). GNR-MFCs produced an immediate working voltage (50mV) indicating the availability... Read More about Towards disposable microbial fuel cells: Natural rubber glove membranes.

Biodegradation and proton exchange using natural rubber in microbial fuel cells (2013)
Journal Article
Winfield, J., Ieropoulos, I., Rossiter, J., Greenman, J., & Patton, D. (2013). Biodegradation and proton exchange using natural rubber in microbial fuel cells. Biodegradation, 24(6), 733-739. https://doi.org/10.1007/s10532-013-9621-x

Microbial fuel cells (MFCs) generate electricity from waste but to date the technology's development and scale-up has been held-up by the need to incorporate expensive materials. A costly but vital component is the ion exchange membrane (IEM) which c... Read More about Biodegradation and proton exchange using natural rubber in microbial fuel cells.

Comparing terracotta and earthenware for multiple functionalities in microbial fuel cells (2013)
Journal Article
Winfield, J., Greenman, J., Huson, D., & Ieropoulos, I. (2013). Comparing terracotta and earthenware for multiple functionalities in microbial fuel cells. Bioprocess and Biosystems Engineering, 36(12), 1913-1921. https://doi.org/10.1007/s00449-013-0967-6

The properties of earthenware and terracotta were investigated in terms of structural integrity and ion conductivity, in two microbial fuel cell (MFC) designs. Parameters such as wall thickness (4, 8, 18 mm), porosity and cathode hydration were analy... Read More about Comparing terracotta and earthenware for multiple functionalities in microbial fuel cells.

The power of glove: Soft microbial fuel cell for low-power electronics (2013)
Journal Article
Winfield, J., Chambers, L. D., Stinchcombe, A., Rossiter, J., & Ieropoulos, I. (2014). The power of glove: Soft microbial fuel cell for low-power electronics. Journal of Power Sources, 249, 327-332. https://doi.org/10.1016/j.jpowsour.2013.10.096

A novel, soft microbial fuel cell (MFC) has been constructed using the finger-piece of a standard laboratory natural rubber latex glove. The natural rubber serves as structural and proton exchange material whilst untreated carbon veil is used for the... Read More about The power of glove: Soft microbial fuel cell for low-power electronics.

Comparing the short and long term stability of biodegradable, ceramic and cation exchange membranes in microbial fuel cells (2013)
Journal Article
Chambers, L. D., Winfield, J., Chambers, L., Rossiter, J., & Ieropoulos, I. (2013). Comparing the short and long term stability of biodegradable, ceramic and cation exchange membranes in microbial fuel cells. Bioresource Technology, 148, 480-486. https://doi.org/10.1016/j.biortech.2013.08.163

The long and short-term stability of two porous dependent ion exchange materials; starch-based compostable bags (BioBag) and ceramic, were compared to commercially available cation exchange membrane (CEM) in microbial fuel cells. Using bi-directional... Read More about Comparing the short and long term stability of biodegradable, ceramic and cation exchange membranes in microbial fuel cells.

Investigating a cascade of seven hydraulically connected microbial fuel cells (2012)
Journal Article
Winfield, J., Ieropoulos, I., & Greenman, J. (2012). Investigating a cascade of seven hydraulically connected microbial fuel cells. Bioresource Technology, 110, 245-250. https://doi.org/10.1016/j.biortech.2012.01.095

Seven miniature microbial fuel cells (MFCs) were hydraulically linked in sequence and operated in continuous-flow (cascade). Power output and treatment efficiency were investigated using varying organic loads, flow-rates and electrical configurations... Read More about Investigating a cascade of seven hydraulically connected microbial fuel cells.

Investigating the effects of fluidic connection between microbial fuel cells (2011)
Journal Article
Winfield, J., Ieropoulos, I., Greenman, J., & Dennis, J. (2011). Investigating the effects of fluidic connection between microbial fuel cells. Bioprocess and Biosystems Engineering, 34(4), 477-484. https://doi.org/10.1007/s00449-010-0491-x

Microbial fuel cells (MFCs) can 'treat' wastewater but individually are thermodynamically restricted. Scale-up might, therefore, require a plurality of units operating in a stack which could introduce losses simply through fluidic connections. Experi... Read More about Investigating the effects of fluidic connection between microbial fuel cells.

The overshoot phenomenon as a function of internal resistance in microbial fuel cells (2011)
Journal Article
Winfield, J., Ieropoulos, I., Greenman, J., & Dennis, J. (2011). The overshoot phenomenon as a function of internal resistance in microbial fuel cells. Bioelectrochemistry, 81(1), 22-27. https://doi.org/10.1016/j.bioelechem.2011.01.001

A method for assessing the performance of microbial fuel cells (MFCs) is the polarisation sweep where different external resistances are applied at set intervals (sample rates). The resulting power curves often exhibit an overshoot where both power a... Read More about The overshoot phenomenon as a function of internal resistance in microbial fuel cells.

Small scale microbial fuel cells and different ways of reporting output (2010)
Journal Article
Ieropoulos, I., Winfield, J., Greenman, J., & Melhuish, C. (2010). Small scale microbial fuel cells and different ways of reporting output. ECS Transactions, 28(9), 1-9. https://doi.org/10.1149/1.3492221

The present study, reports on the findings of connecting 2 stacks of 48 MFCs and the importance of maturity and acclimation for the anodic biofilms. Furthermore, an attempt is made to emphasize the importance of a universal unit for quantifying power... Read More about Small scale microbial fuel cells and different ways of reporting output.

Effects of flow-rate, inoculum and time on the internal resistance of microbial fuel cells (2010)
Journal Article
Ieropoulos, I., Winfield, J., & Greenman, J. (2010). Effects of flow-rate, inoculum and time on the internal resistance of microbial fuel cells. Bioresource Technology, 101(10), 3520-3525. https://doi.org/10.1016/j.biortech.2009.12.108

To process large volumes of wastewater, microbial fuel cells (MFCs) would require anodophilic bacteria preferably operating at high flow-rates. The effect of flow-rate on different microbial consortia was examined during anodic biofilm development, u... Read More about Effects of flow-rate, inoculum and time on the internal resistance of microbial fuel cells.

Electrifying bacteria: The power of pee
Journal Article
Winfield, J., & Ieropoulos, I. (in press). Electrifying bacteria: The power of pee

An introduction into the wonderful world of microbial fuel cells and pee powered toilets.