Skip to main content

Research Repository

See what's under the surface


Artificial neural network simulating microbial fuel cells with different membrane materials and electrode configurations (2019)
Journal Article
Tsompanas, M. A., You, J., Wallis, L., Greenman, J., & Ieropoulos, I. (2019). Artificial neural network simulating microbial fuel cells with different membrane materials and electrode configurations. Journal of Power Sources, 436, 226832. https://doi.org/10.1016/j.jpowsour.2019.226832

© 2019 Elsevier B.V. Microbial fuel cells (MFCs) are gaining interest due to higher power production achieved by deep analysis of their characteristics and their effect on the overall efficiency. To date, investigations on MFC efficiency, can only be... Read More about Artificial neural network simulating microbial fuel cells with different membrane materials and electrode configurations.

Anode surface modification with activated carbon for improved power generation in urine fed Microbial Fuel Cells (2018)
Presentation / Conference
Gajda, I., You, J., Santoro, C., Greenman, J., & Ieropoulos, I. (2018, September). Anode surface modification with activated carbon for improved power generation in urine fed Microbial Fuel Cells. Poster presented at 69th Annual Meeting of the International Society of Electrochemistry

Microbial Fuel Cells (MFCs) utilise organic feedstocks such as urine as fuel for direct electricity production, by employing anode respiring microbes that convert organic matter into electrons while treating waste. One possible approach to bring this... Read More about Anode surface modification with activated carbon for improved power generation in urine fed Microbial Fuel Cells.

A New Method for Modulation, Control and Power Boosting in Microbial Fuel Cells (2018)
Journal Article
Ieropoulos, I., You, J., Gajda, I., & Greenman, J. (2018). A New Method for Modulation, Control and Power Boosting in Microbial Fuel Cells. Fuel Cells, 18(5), 663-668. https://doi.org/10.1002/fuce.201800009

© 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim Microbial fuel cells (MFCs) are energy transducers, which through the metabolic reactions of facultative anaerobic microorganisms, transform the energy in organic matter directly into electricity. E... Read More about A New Method for Modulation, Control and Power Boosting in Microbial Fuel Cells.

Design mining microbial fuel cell cascades (2018)
Journal Article
Preen, R., You, J., Bull, L., & Ieropoulos, I. (2019). Design mining microbial fuel cell cascades. Soft Computing, 23(13), 4673-7643. https://doi.org/10.1007/s00500-018-3117-x

Microbial fuel cells (MFCs) perform wastewater treatment and electricity production through the conversion of organic matter using microorganisms. For practical applications, it has been suggested that greater efficiency can be achieved by arranging... Read More about Design mining microbial fuel cell cascades.

Novel Analytical Microbial Fuel Cell Design for Rapid in Situ Optimisation of Dilution Rate and Substrate Supply Rate, by Flow, Volume Control and Anode Placement (2018)
Journal Article
You, J., Greenman, J., & Ieropoulos, I. (2018). Novel Analytical Microbial Fuel Cell Design for Rapid in Situ Optimisation of Dilution Rate and Substrate Supply Rate, by Flow, Volume Control and Anode Placement. Energies, 11(9), 2377. https://doi.org/10.3390/en11092377

© 2018 MDPI AG. All rights reserved. A new analytical design of continuously-fed microbial fuel cell was built in triplicate in order to investigate relations and effects of various operating parameters such as flow rate and substrate supply rate, in... Read More about Novel Analytical Microbial Fuel Cell Design for Rapid in Situ Optimisation of Dilution Rate and Substrate Supply Rate, by Flow, Volume Control and Anode Placement.

3D printed components of microbial fuel cells: Towards monolithic microbial fuel cell fabrication using additive layer manufacturing (2016)
Journal Article
You, J., Preen, R., Bull, L., Greenman, J., & Ieropoulos, I. (2017). 3D printed components of microbial fuel cells: Towards monolithic microbial fuel cell fabrication using additive layer manufacturing. Sustainable Energy Technologies and Assessments, 19, 94-101. https://doi.org/10.1016/j.seta.2016.11.006

For practical applications of the MFC technology, the design as well as the processes of manufacturing and assembly, should be optimised for the specific target use. Another rising technology, additive manufacturing (3D printing), can contribute sign... Read More about 3D printed components of microbial fuel cells: Towards monolithic microbial fuel cell fabrication using additive layer manufacturing.

Waste and wastewater clean-up using microbial fuel cells (2016)
Thesis
You, J. Waste and wastewater clean-up using microbial fuel cells. (Thesis). University of the West of England

A sustainable energy portfolio should include a range of carbon-neutral and renewable energy technologies. Amongst the renewable energy technologies, MFCs can offer a solution for both sustainable energy and clean water demands. In order to take the... Read More about Waste and wastewater clean-up using microbial fuel cells.

Stability and reliability of anodic biofilms under different feedstock conditions: Towards microbial fuel cell sensors (2015)
Journal Article
Walter, X. A., You, J., Walter, X. A., Greenman, J., Melhuish, C., & Ieropoulos, I. (2015). Stability and reliability of anodic biofilms under different feedstock conditions: Towards microbial fuel cell sensors. Sensing and Bio-Sensing Research, 6, 43-50. https://doi.org/10.1016/j.sbsr.2015.11.007

© 2015 The Authors. Stability and reliability of microbial fuel cell anodic biofilms, consisting of mixed cultures, were investigated in a continuously fed system. Two groups of anodic biofilm matured with different substrates, acetate and casein for... Read More about Stability and reliability of anodic biofilms under different feedstock conditions: Towards microbial fuel cell sensors.

Electricity generation and struvite recovery from human urine using microbial fuel cells (2014)
Journal Article
You, J., Greenman, J., Melhuish, C., & Ieropoulos, I. (2016). Electricity generation and struvite recovery from human urine using microbial fuel cells. Journal of Chemical Technology and Biotechnology, 91(3), 647-654. https://doi.org/10.1002/jctb.4617

BACKGROUND: Urine is an abundant waste product which requires energy intensive treatment processes in modern wastewater treatment plants. However urine can be utilised as fertiliser in the form of struvite. Microbial fuel cells (MFCs) are a promising... Read More about Electricity generation and struvite recovery from human urine using microbial fuel cells.

Micro-porous layer (MPL)-based anode for microbial fuel cells (2014)
Journal Article
You, J., Santoro, C., Greenman, J., Melhuish, C., Cristiani, P., Li, B., & Ieropoulos, I. (2014). Micro-porous layer (MPL)-based anode for microbial fuel cells. International Journal of Hydrogen Energy, 39(36), 21811-21818. https://doi.org/10.1016/j.ijhydene.2014.07.136

© 2014 Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved. Two different anode materials, carbon veil (CV) and carbon cloth (CC), were modified with a micro-porous layer (MPL) in microbial fuel cells (MFCs). When the bi... Read More about Micro-porous layer (MPL)-based anode for microbial fuel cells.

Small-scale microbial fuel cells utilising uric salts (2014)
Journal Article
Ieropoulos, I., Melhuish, C., Greenman, J., You, J., You, J., Greenman, J., …Ieropoulos, I. (2014). Small-scale microbial fuel cells utilising uric salts. Sustainable Energy Technologies and Assessments, 6, 60-63. https://doi.org/10.1016/j.seta.2014.01.005

With exhausting fossil fuels and increasing greenhouse gas emissions, numerous attempts, to overcome future energy challenges, are being pursued. In this study, small-scale microbial fuel cells (MFCs, 0.7mL anodic chamber volume) were built to invest... Read More about Small-scale microbial fuel cells utilising uric salts.

Living architecture bioreactor wall window demonstration
Digital Artefact
You, J., Francois, C., Mendis, A., & Ieropolous, I. Living architecture bioreactor wall window demonstration

These video files show the demonstration window and EECMS (electronic energy and cell management system) in the bioreactor wall for the Living Architecture project funded by EU.

The practical implementation of microbial fuel cell technology
Book Chapter
Ieropoulos, I., Winfield, J., Gajda, I., Walter, X. A., Papacharalampos, G., Merino Jimenez, I., …Greenman, J. (2016). The practical implementation of microbial fuel cell technology. In K. Scott (Ed.), Microbial Electrochemical and Fuel Cells, 357-380. Woodhead (Elsevier)

This chapter illustrates how microbially produced electricity can be harnessed directly to power applications and/or be used as a novel method of sensing. For applications requiring higher power, the continuous power produced will not be sufficient a... Read More about The practical implementation of microbial fuel cell technology.