All Outputs (5)

Further development of a variable camber morphing mechanism using the direct control airfoil geometry concept (2018)
Presentation / Conference
Loudon, K., Bouferrouk, A., Coleman, B., Hughes, F., Lewis, B., Parsons, B., …Yao, Y. (2018, July). Further development of a variable camber morphing mechanism using the direct control airfoil geometry concept. Paper presented at International Symposium of Sustainable Aviation, Rome, Italy

This paper reports on the design, manufacture and testing of an improved variable camber morphing wing mechanism following the study by Evans et al. (2016), who employed the so-called Direct Control Airfoil Geometry (DCAG) concept to actuate the trai... Read More about Further development of a variable camber morphing mechanism using the direct control airfoil geometry concept.

Morphing airfoils analysis using dynamic meshing (2018)
Journal Article
Abdessemed, C., Yao, Y., Bouferrouk, A., & Narayan, P. P. (2018). Morphing airfoils analysis using dynamic meshing. International Journal of Numerical Methods for Heat and Fluid Flow, 28(5), 1117-1133. https://doi.org/10.1108/HFF-06-2017-0261

© 2018, Emerald Publishing Limited. Purpose: The purpose of this paper is to use dynamic meshing to perform CFD analyses of a NACA 0012 airfoil fitted with a morphing trailing edge (TE) flap when it undergoes static and time-dependent morphing. The s... Read More about Morphing airfoils analysis using dynamic meshing.

Aeroacoustics investigation of a harmonically morphing trailing edge flap (2018)
Presentation / Conference
Abdessemed, C., Yao, Y., Bouferrouk, A., & Narayan, P. P. (2018, March). Aeroacoustics investigation of a harmonically morphing trailing edge flap. Paper presented at 53rd 3AF International Conference on Applied Aerodynamics, Salon de Provence, France

In this paper, an aeroacoustic study of a NACA 0012 airfoil fitted with a morphing Trailing Edge Flap (TEF) was performed at conditions of an Angle of Attack (AoA) = 4º, Reynolds number = 0.62×10^6 and Mach number = 0.11. A modified parametrization m... Read More about Aeroacoustics investigation of a harmonically morphing trailing edge flap.

Analysis of a 3D unsteady morphing wing with seamless side-edge transition (2018)
Conference Proceeding
Abdessemed, C., Yao, Y., Bouferrouk, A., & Narayan, P. P. (2018). Analysis of a 3D unsteady morphing wing with seamless side-edge transition. In 2018 Applied Aerodynamics Conference. https://doi.org/10.2514/6.2018-3178

© 2018, American Institute of Aeronautics and Astronautics Inc, AIAA. All rights reserved. In this paper, a comparative study between a NACA 0012 rectangular wing with a statically morphed Trailing Edge Flap (TEF) and the same wing with a hinged flap... Read More about Analysis of a 3D unsteady morphing wing with seamless side-edge transition.

Aerodynamic analysis of a harmonically morphing flap using a hybrid turbulence model and dynamic meshing (2018)
Conference Proceeding
Abdessemed, C., Yao, Y., Bouferrouk, A., & Narayan, P. P. (2018). Aerodynamic analysis of a harmonically morphing flap using a hybrid turbulence model and dynamic meshing. In 2018 Applied Aerodynamics Conference. https://doi.org/10.2514/6.2018-3813

© 2018, American Institute of Aeronautics and Astronautics Inc, AIAA. All rights reserved. A numerical study of the NACA 0012 airfoil fitted with a harmonically morphing trailing edge flap (TEF) is performed at an angle of attack of 4º and a Reynolds... Read More about Aerodynamic analysis of a harmonically morphing flap using a hybrid turbulence model and dynamic meshing.