Skip to main content

Research Repository

Advanced Search

Outputs (101)

The application of laser sintering for archaeological model-making (2012)
Conference Proceeding
Soe, S., Eyers, D. R., Potter, A. T., Jones, T., & Nayling, N. (2012). The application of laser sintering for archaeological model-making. In P. J. Bartolo (Ed.), Innovative Developments in Virtual and Physical Prototyping. , (757-762)

Towards a Platform-Independent Cooperative Human Robot Interaction System: III. An Architecture for Learning and Executing Actions and Shared Plans (2012)
Journal Article
Lallée, S., Pattacini, U., Lemaignan, S., Lenz, A., Melhuish, C., Natale, L., …Dominey, P. F. (2012). Towards a Platform-Independent Cooperative Human Robot Interaction System: III. An Architecture for Learning and Executing Actions and Shared Plans. IEEE Transactions on Autonomous Mental Development, 4(3), 239-253. https://doi.org/10.1109/TAMD.2012.2199754

Robots should be capable of interacting in a cooperative and adaptive manner with their human counterparts in open-ended tasks that can change in real-time. An important aspect of the robot behavior will be the ability to acquire new knowledge of the... Read More about Towards a Platform-Independent Cooperative Human Robot Interaction System: III. An Architecture for Learning and Executing Actions and Shared Plans.

Distributed autonomous morphogenesis in a self-assembling robotic system (2012)
Book Chapter
Liu, W., & Winfield, A. F. (2012). Distributed autonomous morphogenesis in a self-assembling robotic system. In R. Doursat, H. Sayama, & O. Michel (Eds.), Morphogenetic Engineering: Understanding Complex Systems (89-113). Springer. https://doi.org/10.1007/978-3-642-33902-8_4

We present distributed morphogenesis control strategies in a swarm of robots able to autonomously assemble into 3D symbiotic organisms to perform specific tasks. Each robot in such a system can work autonomously, while teams of robots can self-assemb... Read More about Distributed autonomous morphogenesis in a self-assembling robotic system.

On fault tolerance and scalability of swarm robotic systems (2012)
Journal Article
Bjerknes, J. D., & Winfield, A. F. (2012). On fault tolerance and scalability of swarm robotic systems. https://doi.org/10.1007/978-3-642-32723-0_31

This paper challenges the common assumption that swarm robotic systems are robust and scalable by default. We present an analysis based on both reliability modelling and experimental trials of a case study swarm performing team work, in which failure... Read More about On fault tolerance and scalability of swarm robotic systems.

TACTIP - Tactile fingertip device, challenges in reduction of size to ready for robot hand integration (2012)
Presentation / Conference
Winstone, B., & Griffiths, G. (2012, December). TACTIP - Tactile fingertip device, challenges in reduction of size to ready for robot hand integration. Paper presented at 2012 IEEE International Conference on Robotics and Biomimetics (ROBIO 2012), Guangzhou, China

Previous work on the TACTIP project has demonstrated a prototype tactile fingertip device, at a little over twice the diameter(40mm) of a human fingertip (16-20mm). Unlike most other developed MEMS sensors, the TACTIP device is appropriate for all ta... Read More about TACTIP - Tactile fingertip device, challenges in reduction of size to ready for robot hand integration.

Multi-block high-order dns code development for jet in turbulent cross-flow simulation (2012)
Journal Article
Castagna, J., & Yao, Y. (2012). Multi-block high-order dns code development for jet in turbulent cross-flow simulation. Journal of Algorithms and Computational Technology, 6(4), 593-621. https://doi.org/10.1260/1748-3018.6.4.593

A multi-block high-order finite-difference direct numerical simulation (DNS) code has been developed for studying turbulent flows over complex geometries. A global mapping technique is adopted and applied to a multi-block domain arrangement, in which... Read More about Multi-block high-order dns code development for jet in turbulent cross-flow simulation.

Dynamic deflectometry: A novel approach for the on-line reconstruction of specular freeform surfaces (2012)
Journal Article
Wedowski, R. D., Atkinson, G., Smith, M., & Smith, L. (2012). Dynamic deflectometry: A novel approach for the on-line reconstruction of specular freeform surfaces. Optics and Lasers in Engineering, 50(12), 1765-1778. https://doi.org/10.1016/j.optlaseng.2012.07.003

The dynamic inspection and reverse engineering of specular freeform surfaces is a challenge so far largely unsolved. Products produced in high quantities in industrial environments are still inspected manually which is labour intensive, expensive, mo... Read More about Dynamic deflectometry: A novel approach for the on-line reconstruction of specular freeform surfaces.

Debond resisting composite stringers (2012)
Conference Proceeding
O'Donnell, M. P., Weaver, P. M., & Cosentino, E. (2012). Debond resisting composite stringers. In 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference

Beaming: An asymmetric telepresence system (2012)
Journal Article
Steed, A., Steptoe, W., Oyekoya, W., Pece, F., Weyrich, T., Kautz, J., …Slater, M. (2012). Beaming: An asymmetric telepresence system. IEEE Computer Graphics and Applications, 32(6), 10-17. https://doi.org/10.1109/MCG.2012.110

The Beaming project recreates, virtually, a real environment; using immersive VR, remote participants can visit the virtual model and interact with the people in the real environment. The real environment doesn't need extensive equipment and can be a... Read More about Beaming: An asymmetric telepresence system.

Tensile properties and microstructural characteristics of indirect rheoformed A356 aluminum alloy (2012)
Journal Article
Bolouri, A., Bae, J. W., & Kang, C. G. (2013). Tensile properties and microstructural characteristics of indirect rheoformed A356 aluminum alloy. Materials Science and Engineering: A, 562, 1-8. https://doi.org/10.1016/j.msea.2012.10.099

The effects of rheoforming parameters such as the rheoforming temperature and pressure on the tensile properties of H-shaped components were examined. An H-shaped component is useful for practical investigation into the influence of different wall th... Read More about Tensile properties and microstructural characteristics of indirect rheoformed A356 aluminum alloy.