The application of laser sintering for archaeological model-making
(2012)
Conference Proceeding
Soe, S., Eyers, D. R., Potter, A. T., Jones, T., & Nayling, N. (2012). The application of laser sintering for archaeological model-making. In P. J. Bartolo (Ed.), Innovative Developments in Virtual and Physical Prototyping. , (757-762)
CFD simulations of crosswind impinging on a high speed train model (2012)
Presentation / Conference
Bouferrouk, A., Hargreaves, D., & Morvan, H. (2012, December). CFD simulations of crosswind impinging on a high speed train model. Paper presented at 18th Australasian Fluid Mechanics Conference, Launceston, Australia
Multi-block high-order dns code development for jet in turbulent cross-flow simulation (2012)
Journal Article
Castagna, J., & Yao, Y. (2012). Multi-block high-order dns code development for jet in turbulent cross-flow simulation. Journal of Algorithms and Computational Technology, 6(4), 593-621. https://doi.org/10.1260/1748-3018.6.4.593A multi-block high-order finite-difference direct numerical simulation (DNS) code has been developed for studying turbulent flows over complex geometries. A global mapping technique is adopted and applied to a multi-block domain arrangement, in which... Read More about Multi-block high-order dns code development for jet in turbulent cross-flow simulation.
Numerical study of unsteady airflow phenomena in a ventilated room (2012)
Conference Proceeding
Horikiri, K., Yao, Y., & Yao, J. (2012). Numerical study of unsteady airflow phenomena in a ventilated room. https://doi.org/10.1615/ICHMT.2012.CHT-12.730Numerical simulation of airflow in an indoor environment has been carried out for forced, natural and mixed convection modes respectively, by using computational fluid dynamics (CFD) approach of solving the Reynolds-averaged Navier-Stokes equations.... Read More about Numerical study of unsteady airflow phenomena in a ventilated room.
Numerical study of unsteady airflow phenomena in a ventilated room (2012)
Journal Article
Horikiri, K., Yao, Y., & Yao, J. (2012). Numerical study of unsteady airflow phenomena in a ventilated room. Computational Thermal Sciences, 4(4), 317-333. https://doi.org/10.1615/ComputThermalScien.2012005093Numerical simulation of airflow in an indoor environment has been carried out for forced, natural, and mixed convection modes, respectively, by using the computational fluid dynamics (CFD) approach of solving the Reynolds-averaged Navier-Stokes equat... Read More about Numerical study of unsteady airflow phenomena in a ventilated room.
Numerical simulation of a turbulent flow over an axisymmetric hill (2012)
Conference Proceeding
Castagna, J., Yao, Y., & Yao, J. (2012). Numerical simulation of a turbulent flow over an axisymmetric hill. https://doi.org/10.2514/6.2012-98Simulation of a turbulent °ow over an axisymmetric hill has been carried out to study three-dimensional °ow separation and reattachment that occur on the lee-side of the geome-try. A total of four simulations are considered at low Reynolds number of... Read More about Numerical simulation of a turbulent flow over an axisymmetric hill.
Laser sintering for the fabrication of architectural models (2012)
Journal Article
Yusmawiza, W. A., Eyers, D. R., & Soe, S. (2012). Laser sintering for the fabrication of architectural models. Advanced Materials Research, 576, 637-640. https://doi.org/10.4028/www.scientific.net/AMR.576.637Additive Manufacturing technologies are widely employed in the production of models for a range of industries. However, to-date little explicit research attention has examined the way in which the Laser Sintering technologies can be used in the speci... Read More about Laser sintering for the fabrication of architectural models.
Measurement and evaluation of the wave climate near the wave hub using a 5-beam ADCP (2012)
Presentation / Conference
Strong, B., Bouferrouk, A., & Smith, G. (2012, October). Measurement and evaluation of the wave climate near the wave hub using a 5-beam ADCP. Paper presented at 4th International Conference on Ocean Energy, Dublin
Effect of jet inclination angle and hole exit shape on vortical flow structures in low-reynolds number jet in cross-flow (2012)
Journal Article
Yao, Y., Maidi, M., & Yao, J. (2012). Effect of jet inclination angle and hole exit shape on vortical flow structures in low-reynolds number jet in cross-flow. Modelling and Simulation in Engineering, 2012, 1-7. https://doi.org/10.1155/2012/632040Numerical studies have been performed to visualize vortical flow structures emerged from jet cross-flow interactions. A single square jet issuing perpendicularly into a cross-flow was simulated first, followed by two additional scenarios, that is, in... Read More about Effect of jet inclination angle and hole exit shape on vortical flow structures in low-reynolds number jet in cross-flow.
CFD prediction and experimental measurement of blade water coverage in a diesel turbocharger (2012)
Journal Article
Yao, J., & Yao, Y. (2012). CFD prediction and experimental measurement of blade water coverage in a diesel turbocharger. Modelling and Simulation in Engineering, 2012, 1-11. https://doi.org/10.1155/2012/789563A turbocharger unit for diesel engine is often equipped with a built-in online water washing system and its performance is not always satisfactory because of efficiency declination due to deposit accumulated on blade surfaces not being washed away. I... Read More about CFD prediction and experimental measurement of blade water coverage in a diesel turbocharger.
Additive manufacturing for archaeological reconstruction of a medieval ship (2012)
Journal Article
Soe, S., Eyers, D. R., Jones, T., & Nayling, N. (2012). Additive manufacturing for archaeological reconstruction of a medieval ship. Rapid Prototyping Journal, 18(6), 443-450. https://doi.org/10.1108/13552541211271983Purpose - The purpose of this paper is to examine the suitability of additive manufacturing technologies in the reconstruction of archaeological discoveries as illustrative models. The processes of reverse engineering and part fabrication are discuss... Read More about Additive manufacturing for archaeological reconstruction of a medieval ship.
The enhanced assumed strain method for the isogeometric analysis of nearly incompressible deformation of solids (2012)
Journal Article
Cardoso, R. P., & Cesar de Sa, J. M. (2012). The enhanced assumed strain method for the isogeometric analysis of nearly incompressible deformation of solids. International Journal for Numerical Methods in Engineering, 92(1), 56-78. https://doi.org/10.1002/nme.4328Isogeometric analysis has recently become very popular for the numerical modeling of structures and fluids. Among other potential features, advantages of using a non-uniform rational B-splines (NURBS)-based isogeometric analysis over the traditional... Read More about The enhanced assumed strain method for the isogeometric analysis of nearly incompressible deformation of solids.
Robust power system stabilizers for multi-machine systems in large wind parks (2012)
Presentation / Conference
Yuan, Y., Nouri, H., & Zhu, Q. (2012, September). Robust power system stabilizers for multi-machine systems in large wind parks. Presented at UPEC 2012, Brunel University, London, UK
Development of a novel NDT technique for damage classifications of composites (2012)
Presentation / Conference
Amali, R., & Hughes, B. J. (2012, September). Development of a novel NDT technique for damage classifications of composites. Paper presented at FRP Bridges Conference 2012, London
Quantitative analysis on SLS part curling using EOS P700 machine (2012)
Journal Article
Soe, S. (2012). Quantitative analysis on SLS part curling using EOS P700 machine. Journal of Materials Processing Technology, 212(11), 2433-2442. https://doi.org/10.1016/j.jmatprotec.2012.06.012Selective laser sintering (SLS) is a thermal process and one of the main problems associated with it is "part curling". The aim of the work is to describe the degree of curling quantitatively and to provide suggestions to minimise the curl, thereby i... Read More about Quantitative analysis on SLS part curling using EOS P700 machine.
LMI based H2/H∞ power system stabilizers for large disturbances in power systems with wind plant (2012)
Presentation / Conference
Peng, Y., Zhu, Q., & Nouri, H. (2012, June). LMI based H2/H∞ power system stabilizers for large disturbances in power systems with wind plant. Paper presented at International Conference on Modelling, Identification & Control (ICMIC), 2012, Hubei, China
Progresses in study of pipeline robot (2012)
Presentation / Conference
Du, Y., Zhu, Q., Ghauri, S., Zhai, J., Jia, H., & Nouri, H. (2012, June). Progresses in study of pipeline robot. Paper presented at International Conference on Modelling, Identification and Control, Wuhan, China, June 24-26, 2012, Wuhan, China
A new procedure for multi-mode sequential flocking with application to multiple non-holonomic mobile robot motion control: Implementation and analysis (2012)
Journal Article
Cheng, L., Zheng, X. J., Wu, H. Y., Zhu, Q. M., Wang, Y. J., & Nouri, H. (2012). A new procedure for multi-mode sequential flocking with application to multiple non-holonomic mobile robot motion control: Implementation and analysis. International Journal of Modelling, Identification and Control, 16(1), 50-59. https://doi.org/10.1504/IJMIC.2012.046695This is the second of a two-part paper that investigates the multi-mode sequential flocking with application to multiple non-holonomic mobile robot motion control. In this part, a multiple mobile robot simulation system based on MuRoS is used to simu... Read More about A new procedure for multi-mode sequential flocking with application to multiple non-holonomic mobile robot motion control: Implementation and analysis.
Single-stage formulations for synchronised two-stage lot sizing and scheduling in soft drink production (2012)
Journal Article
Ferriera, D., Clark, A., Almada-Lobo, B., & Morabito, R. (2012). Single-stage formulations for synchronised two-stage lot sizing and scheduling in soft drink production. International Journal of Production Economics, 136(2), 255-265. https://doi.org/10.1016/j.ijpe.2011.11.028This study deals with industrial processes that produce soft drink bottles in different flavours and sizes, carried out in two synchronised production stages: liquid preparation and bottling. Four single-stage formulations are proposed to solve the s... Read More about Single-stage formulations for synchronised two-stage lot sizing and scheduling in soft drink production.
An alternative approach to determine material characteristics using spherical indentation and neural networks for bulk metals (2012)
Journal Article
Mahmoudi, A. H., Nourbakhsh, S. H., & Amali, R. (2012). An alternative approach to determine material characteristics using spherical indentation and neural networks for bulk metals. Journal of Testing and Evaluation, 40(2), 211-219. https://doi.org/10.1520/JTE103897Material characteristics such as Young modulus, yield, and ultimate stresses are often considered as fundamental material parameters. Determination of material characteristics using the instrumented indentation test has gained interest among many res... Read More about An alternative approach to determine material characteristics using spherical indentation and neural networks for bulk metals.