Skip to main content

Research Repository

Advanced Search

Woodburytype: A historical process resurrected by modern methods (2020)
Journal Article
Klein, S., Guy, W., Leech, D., & Argyle, J. (2020). Woodburytype: A historical process resurrected by modern methods. IMPACT Printmaking Journal,

One of the technological achievements of the 19th century was the mass reproduction of photographic images. Woodburytype was the first commercially successful photomechanical continuous tone printing method, of unsurpassed quality until today. Along... Read More about Woodburytype: A historical process resurrected by modern methods.

Innovative technologies for sustainable textile coloration, patterning, and surface effects (2020)
Book Chapter
Kane, F., Shen, J., Morgan, L., Prajapati, C., Tyrer, J., & Smith, E. (2020). Innovative technologies for sustainable textile coloration, patterning, and surface effects. In S. S. Muthu, & M. A. Gardetti (Eds.), Sustainability in the Textile and Apparel Industries: Sustainable Textiles, Clothing Design and Repurposing (99-127). Springer International Publishing. https://doi.org/10.1007/978-3-030-38545-3_4

The environmental impact of textile dyeing and finishing is of paramount concern in the textile industry. Enzyme and laser processing technologies present attractive alternatives to conventional textile coloration and surface patterning methods. Both... Read More about Innovative technologies for sustainable textile coloration, patterning, and surface effects.

Spatial traces and skeletal projections (2020)
Journal Article
Laidler, P. (2020). Spatial traces and skeletal projections. Drawing: Research, Theory, Practice, 5(1), 117-122. https://doi.org/10.1386/drtp_00025_7

The article discusses how sketching is utilised as a durational state within my practice and as a means to cultivate the creative potential that is afforded by the rough draft. The proceeding development of the sketch is also considered in relation t... Read More about Spatial traces and skeletal projections.

Electroosmotically generated disinfectant from urine as a by-product of electricity in microbial fuel cell for the inactivation of pathogenic species (2020)
Journal Article
Gajda, I., Obata, O., Greenman, J., & Ieropoulos, I. A. (2020). Electroosmotically generated disinfectant from urine as a by-product of electricity in microbial fuel cell for the inactivation of pathogenic species. Scientific Reports, 10, Article 5533. https://doi.org/10.1038/s41598-020-60626-x

This work presents a small scale and low cost ceramic based microbial fuel cell, utilising human urine into electricity, while producing clean catholyte into an initially empty cathode chamber through the process of electro-osmostic drag. It is the f... Read More about Electroosmotically generated disinfectant from urine as a by-product of electricity in microbial fuel cell for the inactivation of pathogenic species.

Investigating the effectiveness of different interaction modalities for spatial human-robot interaction (2020)
Conference Proceeding
He, J., van Maris, A., & Caleb-Solly, P. (2020). Investigating the effectiveness of different interaction modalities for spatial human-robot interaction. . https://doi.org/10.1145/3371382.3378273

With the increasing use of social robots in real environments, one of the areas of research requiring more attention is the study of human-robot interaction (HRI) when a person and robot are moving close to each other. Understanding effective ways to... Read More about Investigating the effectiveness of different interaction modalities for spatial human-robot interaction.

The impact of affective verbal expressions in social robots (2020)
Conference Proceeding
van Maris, A., Sutherland, A., Mazel, A., Dogramadzi, S., Zook, N., Studley, M., …Caleb-Solly, P. (2020). The impact of affective verbal expressions in social robots. . https://doi.org/10.1145/3371382.3378358

This research investigates whether there is an ethical concern in robots misrepresenting their internal state through speech. Participants were asked to discuss their food preferences with a robot, where the robot would either respond through facts o... Read More about The impact of affective verbal expressions in social robots.

Simulated pilot-in-the-loop testing of handling qualities of the flexible wing aircraft (2020)
Journal Article
Portapas, V., & Cooke, A. (2020). Simulated pilot-in-the-loop testing of handling qualities of the flexible wing aircraft. Aviation, 24(1), 1-9. https://doi.org/10.3846/aviation.2020.12175

© 2020 The Author(s). Published by VGTU Press. This article aims to indicate the differences between rigid and flexible wing aircraft flying (FQ) and handling (HQ) qualities. The Simulation Framework for Flexible Aircraft was used to provide a generi... Read More about Simulated pilot-in-the-loop testing of handling qualities of the flexible wing aircraft.

An Investigation of a Morphing Flapped Wing (2020)
Presentation / Conference
Madi, F., Kanaa, Z., Narayan, P., & Yao, Y. (2020, February). An Investigation of a Morphing Flapped Wing. Paper presented at Aerospace Europe Conference (AEC2020), Bordeaux, France

This study investigated the design, development, and validation of an alternative method to achieve morphing in wings through the implementation of a sliding mechanism concept. Performance was tested at a specific Reynolds number (Re = 0.62 × 106). M... Read More about An Investigation of a Morphing Flapped Wing.

Smart Tooling for Ceramic Extrusion (2020)
Presentation / Conference
Jorgensen, T. (2020, February). Smart Tooling for Ceramic Extrusion. Presented at Material Research Exchange, Business Design Centre, London

This presentation will outline research into ceramic profile extrusion. The research was initiated as creative explorations within the author's own craft practice. However, the project has since developed into a UKRI funded project, with global compa... Read More about Smart Tooling for Ceramic Extrusion.

Microbial fuel cell stack performance enhancement through carbon veil anode modification with activated carbon powder (2020)
Journal Article
Gajda, I., Greenman, J., & Ieropoulos, I. (2020). Microbial fuel cell stack performance enhancement through carbon veil anode modification with activated carbon powder. Applied Energy, 262, Article 114475. https://doi.org/10.1016/j.apenergy.2019.114475

The chemical energy contained in urine can be efficiently extracted into direct electricity by Microbial Fuel Cell stacks to reach usable power levels for practical implementation and a decentralised power source in remote locations. Herein, a novel... Read More about Microbial fuel cell stack performance enhancement through carbon veil anode modification with activated carbon powder.

Macrocognitive models of expertise (2020)
Book Chapter
Hutton, R. (2020). Macrocognitive models of expertise. In . P. Ward, J. M. S. Maarten Schraagen, J. Gore, & E. M. Roth (Eds.), The Oxford Handbook of Expertise (190-218). Oxford University Press. https://doi.org/10.1093/oxfordhb/9780198795872.013.9

The purpose of this chapter is to provide a brief understanding of macrocognition, some of its theoretical and methodological underpinnings, and three examples of macrocognitive models: the recognition-primed decision model, the data–frame model of s... Read More about Macrocognitive models of expertise.

Audio-driven robot upper-body motion synthesis (2020)
Journal Article
Ondras, J., Celiktutan, O., Bremner, P., & Gunes, H. (2021). Audio-driven robot upper-body motion synthesis. IEEE Transactions on Cybernetics, 51(11), 5445-5454. https://doi.org/10.1109/tcyb.2020.2966730

Body language is an important aspect of human communication, which an effective human-robot interaction interface should mimic well. Human beings exchange information and convey their thoughts and feelings through gaze, facial expressions, body langu... Read More about Audio-driven robot upper-body motion synthesis.

Examining the relationship between social media analytics practices and business performance in the Indian retail and IT industries: The mediation role of customer engagement (2020)
Journal Article
Garg, P., Gupta, B., Dzever, S., Sivarajah, U., & Kumar, V. (2020). Examining the relationship between social media analytics practices and business performance in the Indian retail and IT industries: The mediation role of customer engagement. International Journal of Information Management, 52, Article 102069. https://doi.org/10.1016/j.ijinfomgt.2020.102069

Social media analytics (SMA) is a dynamic field which has received considerable attention from both academics and management practitioners alike. A significant number of the scholarly research currently being conducted in SMA, however, is conceptual.... Read More about Examining the relationship between social media analytics practices and business performance in the Indian retail and IT industries: The mediation role of customer engagement.

A quantum algorithm for ray casting using an orthographic camera (2020)
Conference Proceeding
Alves, C., Santos, L. P., & Bashford-Rogers, T. (2020). A quantum algorithm for ray casting using an orthographic camera. . https://doi.org/10.1109/ICGI47575.2019.8955061

Quantum computing has the potential to provide solutions to many problems which are challenging or out of reach of classical computers. There are several problems in rendering which are amenable to being solved in quantum computers, but these have ye... Read More about A quantum algorithm for ray casting using an orthographic camera.

Books of the future (2019)
Journal Article
Bodman, S. (in press). Books of the future. z.B. [zum Beispiel] [zum Buch] / [for example] [about books], autumn 2019,

Artists’ books have built and aligned their status according to the value of the printed book, so will arrive at their fate in parallel. If digital reading is going to be the majority method of the future, then how will physical books survive? And w... Read More about Books of the future.

Le tecnologie digitali 3d per la conservazione e la conoscenza del patrimonio culturale (2019)
Book Chapter
D'Agnano, F., Vernier, P., Ballarin, M., & Balletti, C. (2019). Le tecnologie digitali 3d per la conservazione e la conoscenza del patrimonio culturale. In Una nuova frontiera della didattica Metodi, tecnologie, esperienze italiane. Roma: Carrocci Editore

This chapter focuses on 3d technology and Cultural Heritage. It analyzes 3d technology such as CNC machines and additive processes: the 3d printers. Solid printing in museums/3d printing and geomatics for replicas validation.

A spectral pedestrian-based approach for modal identification (2019)
Journal Article
Jesus, A., Živanović, S., & Alani, A. (2020). A spectral pedestrian-based approach for modal identification. Journal of Sound and Vibration, 470, Article 115157. https://doi.org/10.1016/j.jsv.2019.115157

The dynamic behaviour of footbridges is characterised by modal properties such as natural frequencies, mode shapes, damping ratios and modal masses. Their estimation via modal tests often requires expensive or difficult-to-operate equipment (e.g. sha... Read More about A spectral pedestrian-based approach for modal identification.